Loc8tor Lite Bedienungsanleitung
User Guide
Manual del Usuario, Mode d’Emploi
Bedienungsanleitung
English 2
Español 15
Français 30
Deutsch 44
Pack Contents:
1x Loc8tor Lite, 2x Mini Homing Tags
1x Mounting Bracket, Tag ID Sticker
Key Ring Loop, Adhesive Strips
Page
INTRODUCTION
Thank you for purchasing a Loc8tor Lite, the great new
product that guides you to your mislaid valuables even in
those hard to nd places.
The Loc8tor Lite has been designed to be versatile
and easy to use, whether at home, out and about or in
business. Please take a few minutes to read through this
User Guide to help you get the most out of your Loc8tor.
Loc8tor has been manufactured to quality standards to
run trouble free and comes supplied with a manufacturers
two year warranty. For additional product information,
contact details and frequently asked questions please
visit our website at www.loc8tor.com.
We’d love to hear from you, what you like about Loc8tor
or any suggestions you have to improve it. E-mail
sales@loc8tor.com.
We hope you enjoy your new purchase and can now rest
at ease, avoiding those frustrating moments of mislaying
your important items.
www.loc8tor.co.uk www.loc8tor.com
Anthony Richards
Managing Director
2
3
CONTENTS
Button Guide 3
Getting Started 4
Switching ON / OFF 6
Volume 6
Locating – Find a mislaid item 7
Range Guidelines 9
Mounting Bracket 9
Batteries 10
Unregister / Deleting a Tag 11
Warranty 12
General Care 13
Please note 13
On / Off
(hold in
for two
seconds)
Volume
Register and
Locate up to
four Tags
Directional
lights Status Light
Button Guide
Page
4
GETTING STARTED
Your Loc8tor could not be easier to setup or use. Follow
these steps and you’ll be tracking down your tagged
valuables in no time at all.
1. ACTIVATE BATTERIES
Pull out the strip on the back of the Loc8tor to activate
battery.
It will beep and all the lights will ash – It is now ON. *
* After approx. 45 seconds left idle your Loc8tor will turn
itself off.
2. REGISTER A TAG
Pull out the strip on the Tag to activate batteries.• Tag beeps twice and the red light ashes twice .• Place Tag you wish to register next to Loc8tor making• sure all other Tags have been moved more than an
arms length away.
Make sure the Loc8tor Lite is switched on (red status• light will ash when ON).
Select one of the buttons on the front of the Loc8tor to• assign the Tag to. Hold the button down for 3 seconds.
The Loc8tor will beep.
5
3. ATTACH TAG
Adhesive strips: Best used when attaching to a clean,
dry, hard, at surface. Peel off backing to attach.
Sticky tabs are not permanent but increase their bond
with time. Ideally leave for a minimum of 10 minutes.
Strongest bond after 24 hours. To remove insert at tool
under Tag and gently twist to prise off.
Key ring loop: Use to attach Tag to items such as key
ring, bags, mobile phones etc. Push loop through the
Tag hole and then pull ring through the loop.
Release button – Loc8tor will beep to conrm start of • registration and status light will ash rapidly. Tag will
complete registration process.
Once registered Tag and Loc8tor will beep and ash • once.
Repeat process for up to 4 Tags, assigning each Tag
to a different button. Each of the four Tags when being
located will beep differently to help identication.
SWITCHING ON / OFF
ON
Hold in the right hand side button (see Button Guide)• for 2 seconds. The Loc8tor will bleep and all the lights
ash.
Small status light will ash whilst on. • The Loc8tor will automatically power down after 45• seconds if left idle.
OFF
Hold in the right hand side button for 2 seconds. Loc8tor • will beep and turn off.
VOLUME
Press in the left hand side button to select from three
volume settings; off, low and high. An audio beep will
sound when pressed indicating the current volume
level.
TIPS
Write on the sticky label provided which button is• allocated to each Tag / item.
If a locate button is pressed with no Tag assigned to it• an error tone will sound and the status lights will blink
rapidly. To register a Tag to this button, complete the
steps ‘REGISTER A TAG’.
6
LOCATING – FIND A MISLAID ITEM
LOST
Press and hold down the ON button until the Loc8tor• beeps and lights ash.
Press the button that your item / Tag is allocated to.• Loc8tor will beep and status light will ash rapidly as it’s • searching for the Tag.
When a Tag is detected the locating• lights will light up and the audio will
start.
With the Loc8tor in your hand turn• around slowly completing a full circle.
As you point in the right direction and• then move nearer to the item, the
audio pitch and frequency of beeps
will increase, and lights on the Loc8tor
change from red to amber to green.
Once a circle has been completed, face the direction of• the strongest audio and visual signal and walk in this
direction.
When you see three green lights the Tag is very close• by.
To guide you right in, the Loc8tor now changes to• ‘zooming in’ mode (pictured). As you get closer
amber then red lights illuminate and the audio pitch
increases.
FOUND
7
To stop a search press ON/OFF button or the locate
button your Tag is allocated to.
8
LOCATING TIPS
Place the Tag on a surface and practice locating a few• times to get a feel for how it works.
If you are ever unsure which direction to go in slowly• repeat full 360° circle and then go in the direction with
the strongest signal strength.
Strongest signal is displayed when the Loc8tor is• pointing directly at Tag. Try moving Loc8tor up and
down as the Tag could be upstairs or downstairs.
If you are close to a wall whilst getting a strong signal• check the room next door.
Try pressing the volume button on the Loc8tor when• you are close in order to mute and listen out for Tag
beeps.
If no signal is displayed try moving position to a different• area and repeat process.
9
RANGE GUIDELINES
Range will vary greatly depending on where the Tag
is used and what it’s attached to. If higher up and with
a clear line of sight, items can be found in excess of
122m/400feet. The chart gives a guideline. Actual range
may differ signicantly as performance is affected by
type of application and environment it’s used in.
Tortoise
30m / 100ft
Cat or Dog
30 - 100m / 100 - 300ft
Parked Car
30 – 140m / 100 – 500ft
ESTIMATED RANGE CHART
Model Aircraft up a tree
180m / 600ft
MOUNTING BRACKET
Keep the Loc8tor in the mounting bracket when not
in use. Attach bracket to the fridge or any other metal
surface using the sticky backed magnet or attach it to a
door/wall using the raw plug and screw provided.
Place the sticker on the inside of the mounting bracket as
a quick reminder what you have tagged.
BATTERIES
Loc8tor Handheld: If the Loc8tor does not power up or
lights are faint replace the battery using 1 x CR2032 or
equivalent placing in the battery compartment + side up.
Battery compartment can be found on the back at the
bottom. Slide down to open.
To change the batteries in a Tag: Put your thumbnail or
a at tool at the end of the Tag, by the lanyard hole, into
the split line (line going around the middle of the Tag).
Keeping your thumbnail / at tool in the split line move it
around to the middle of the long side. The Tag will pop
open.
Replace with SR54 (silver oxide) 1.5v button cells or • equivalent to provide best battery life, keeping the plus
side face up nearest the lanyard
hole.
Replace the lid by putting one side• in rst then pushing shut.
If batteries are correctly• inserted the Tag will beep
when case is closed.
To test batteries open
then shut lid by following
the above steps.
If the Tag does not beep and ash
replace batteries.
10
Inhaltsverzeichnis
Sprachen:
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
