Lockly PGV528W Bedienungsanleitung
USER MANUAL
LOCKLY SMART SAFE
6
4 3
0
7 2
8
1 4
5
3 9
TABLE OF CONTENTS
Section 1 - Product Highlights
Section 2 - Product Overview
Section 3 - Installation & Setup
3.1 Optional Installation
3.2 Setting Up the Secure Link Wi-Fi Hub
3.3 Connecting Your Lockly Smart Safe
1.1 Product Features
Section 6 - Advanced Features
Section 7 - Key Duplication
Section 9 - Maintenance and Cleaning
9.1 Cleaning
1
2
3
4
6
7
5
8
10
12
25
28
29
26
27
27
31
32
32
32
32
32
33
34
Section 10 - Safety Precautions
10.1 Safety Precautions 35
Section 8 - Important Notes
8.1 Important Notes 34
2.1 Product Overview - Exterior
2.2 Product Overview - Interior
2.3 Understanding Your Smart Safe
2.4 Rebooting Your Smart Safe
2.5 Low Battery
2.6 Changing The Battery
5.1 Unlocking with Access Codes
5.2 Unlocking with Fingerprint
5.3 Unlocking with App
5.4 Unlocking with QR Code
15
16
16
17
19
21
23
24
4.6 Pairing to a New Mobile Device
4.7 Adding a Fingerprint
4.8 Fingerprint Scanning Directions
4.9
Fingerprint Scanning Tips & Troubleshoot
4.10 Shine Mode
Section 4 - Using Your Smart Safe
Section 5- Unlocking
14
15
4.1 Configuring Access
4.2 Adding Access Codes
4.3 Checking/Deleting Access Code
4.4 Entering Programming Mode
4.5 Restore Factory Settings
5.5 Unlocking with Physical Key
5.6 Safe Mode - Overview
6.1 Offline Access Code™ (OAC)
6.2 eBadge
6.3 Smart-Sync
6.4 Sub-Admin Access
6.5 Duress Finger Alert
6.6 Twin-Credential Opening Capability
30
5.7 Disabling Safe Mode
7.1 Key Duplication
Table of Contents
For additional support, visit http://Lockly.com/help
1.1 Product Features
1SECTION 1.1
Patented Hack-Proof PIN Genie Keypad
Digits are randomly displayed on the key pad ensuring access codes to be undetectable to intruders
after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button.
Users can press any button showing their number. Location of the numbers are always different every
time someone uses the keypad, making it hard for prying eyes to guess the correct code.
Advanced 3D Fingerprint Recognition
Biometric Fingerprint Recognition protocol allows up to 99 registered fingerprints to be used and accepts
only actual fingerprints - preventing lifted prints from being used.
Tamper-proof / Premium Build
Made of drop tested fortified steel alloy with corrosion resistant coating, magnet resistant and laser-cut
3D keyway. With included anti-theft cable and screws to prevent the Smart Safe from being moved or
stolen.
Air Transfer compatible
Quickly transfer fingerprint and trusted user profiles from your Lockly smart locks to your Smart Safe.
Pneumatics Easy-Lift Mechanism
Unlock Safe quietly and in-sync with LED lights that allows users to unlock, grab valuables with a single
hand. Pneumatics mechanism can be easily replaced (DIY) when unlocking performance slows down
overtime.
Backup Keys and Type-C USB Socket
Lockly Smart Safe can be opened with physical backup keys. There is type-C connection socket that can
be the source of continuous power supply or can be used as power backup in case the Safe runs out of
battery.
Offline Access Code™(OAC)
The offline access code can allow owners to issue access codes, set the allowed access duration, all
without Lockly ever connecting to the internet, so in case of power outage, you can still magically and
remotely issue Access Codes without any connection to the web.
Live Monitoring
Through your smartphone, monitor Smart Safe access from anywhere in the world and Secure control
access all permissions.
Multiple Access Codes & Monitoring
Store up to 37 Access Codes for family, friends and guests, as well as monitor entry and exit records. You
can also upgrade up to 100 user access codes with Lockly\OS.
2.1 Product Overview - Exterior
2SECTION 2.1
Fingerprint
Reboot Button
LED Indicator
OK Button
Keypad Buttons
Touchscreen
Key Hole
Battery
Compartment
LED Light
Type-C USB port
SECTION 2.2 3
2.2 Product Overview - Interior
Program Button
When the Safe opens, the light automatically
turns ON and OFF after 2 minutes. Touch the
keypad to turn ON the lights again.
2.3 Understanding Your Smart Safe
Understanding some key functions of operating your Smart Safe is important. The following guides
will walk you through setting the Safe, adding Access Codes, deleting Access Codes, adding finger-
prints, deleting fingerprints, how to configure your OAC (Offline Access Code™) and more...
For any questions you can always visit https://Lockly.com/help for assistance.
Don’t forget that Lockly works best with our iOS and Android™app. Please download the app by
visiting the link below.
Scan or visit Lockly.com/app
4 SECTION 2.3
SECTION 2.4 5
2.4 Rebooting Your Smart Safe
Reboot Button
NOTICE
Reboot Lockly in case of dead battery or malfunction. No settings
will be changed and all Access Codes will still be stored within
Lockly.
Press and release the reboot button when you want to reboot the Safe. Your Lockly will beep once
after reboot. Only reboot when necessary.
You will need something small such as a paperclip, to press the reboot button located on the exterior
of the safe, left of the fingerprint reader. Insert the paperclip and press down firmly and let go. Your
screen should restart and the safe should reboot automatically.
6 SECTION 2.5
Type-C
2.5 Low Battery
When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition
to the flashing low battery icon on the touch screen. You should replace batteries immediately
to avoid your Smart Safe from shutting down.
When your Safe low-battery warning alert finally dies, you will have 3 chances to unlock your
Safe
either by a password, APP or fingerprint. If the unlock was successful, the low-battery
warning
alert will be on for 1 minute. After which, the Safe will go to dead-battery mode
and the screen will
display a low-battery icon .
Dead Battery
Condition Indicator Solution
Low Battery
Battery Icon on the display
keypad will light up to indicate
low battery .
Replace batteries immediately to
avoid battery failure. Lockly can still
operate up to 300 cycles
in low
battery condition.
When there is no display
and sounds; and screen is
non-functional.
Your Lockly has a Type-C USB port located at the right
exterior of the Smart Safe. You may use a power bank
to temporarily power up your safe. Once the screen
lights up, enter your Access Code or scan a registered
fingerprint to unlock Safe. Once unlocked, batteries
should be replaced immediately.
This Type-C USB port can be plugged in a DC 5V to
provide continuous power supply for the safe. The
installed battery will serve as backup power supply in
case of power interruptions.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the safe.
Alternatively, use Type-C USB port
as shown
below to
activate the
safe.
7SECTION 2.6
2.6 Changing The Battery
Under normal use, the Lockly battery will last up to a year. Please check battery levels regularly and
change your batteries when the low battery notification is issued. For best practice, always use new
batteries by a major brand.
Open the battery compartment cover and insert four (4) new AA alkaline batteries as shown.
- Make sure the batteries are oriented correctly by matching the orientation displayed.
- Replacing the batteries do not reset stored Access Codes.
- To see a list of recommended brands, please visit http://Lockly.com/battery
NOTICE
Press the snap to remove the battery cover.
Carefully take out the battery holder and disconnect from the terminal.
Make sure you DO NOT PULL the connection cable.
Remove and/or install new 4 x AA batteries according to +/- direction.
Connect the battery holder to the terminal cable and return inside the battery box.
Return the battery cover.
1
2
3
4
- AA +
3
124
Whenever batteries are replaced, reconnecting Smart Safe to your smartphone
app is required.
If you have not yet downloaded the app, visit: Lockly.com/app
8SECTION 3.1
3.1 Optional Installation
Installation is optional for your Lockly Smart Safe. It is suggested to choose a location within your
home or office is that it discreet yet can be easily accessed when it is needed. Ideally, this safe could
fit in a bedroom side table, closet or an office cabinet drawer.
If you wish to position the safe in open areas like top of the table, wall divider, a car or any place that
you think there is a chance that it can be stolen, we have provided mounting screws and security
cable that can be used to secure your safe.
"Click"
Length: 1100mm 2
1
Head
Head
Tail
1. Wrap the cable head and tail around a fixed
object.
2. Insert the cable head to the upper right
groove buckle of the safe. When you hear a
"click" sound, the rope installation is completed.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Lockly Sicher Handbücher
Beliebte Sicher Handbücher anderer Marken
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung
Hornady
Hornady SnapSafe Trunk Safe II Bedienungsanleitung
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung
Honeywell
Honeywell 5912 Bedienungsanleitung
Phoenix
Phoenix FS1280F Bedienungsanleitung
Phoenix
Phoenix SS0992K Produktinformationsblatt
Technomax
Technomax Trony Series Handbuch
SPORTS AFIELD
SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung
RICHTER CZECH
RICHTER CZECH LA Bedienungsanleitung
Olymp
Olymp GOsafe 110 Bedienungsanleitung
Phoenix
Phoenix SS0100E Produktinformationsblatt
Clarke
Clarke Strong-Arm CS1000K Bedienungsanleitung