2. Precautions and Safety Instructions
Please do not turn off the power while the hot end temperature is
over 100℃, unless malfunction is detected.
Never touch the hot end during printing.
There is a risk of burn injury.
Do not let children operate the machine alone without adult
supervision.
Do not impact the machine during printing.
Make sure to use only PLA filaments.
Be careful when removing 3D prints from the bed.
Do not disassemble the product.
Do not use the machine for other than intended use.
Do not leave the machine outdoors, especially in direct sunlight.
Please unplug the power during lightning or when the machine is
not in use for long periods of time.
7LOCOOP Y USER MANUAL | www.locoop.net
