Logic LG-EPM150 Bedienungsanleitung

X7/X5/X3

Main body Support plate

Decorative frame Threaded rod

Measuring plate Remote controller

Trigger cable (1m)

Slot cover

RJ12 cable (1m)

INSTALLATION

INSTRUCTION

www.logicav.in

LG-EPM150 - ALUMINIUM

www.logicav.in

Main parts are as above, below are accessories:

1. Hexagon screw M6*20(X4),M4*20(X4)

2. Self-tapping screw M3*10 (X50)

3. Metal washer 20*1.5(X8)

4. Plastic washer 20*6(X8)

5. Concrete anchor M10*60(X4)

6. Allen key (X2)

7. Motor asjustment pen (X1)

8. Power cord (X1)

9. Instruction Manual

LG-EPM 50

LG-EPM 100

LG-EPM 150

453*528*129 2 140-530 490*494 40 480*410 470-500

453*528*220 4 140-1000 490*494 40 480*410 550-970

453*528*300 6 140-1470 490*494 40 480*410 610-1440

Spec. Body Size

(mm)

Travel distance

(mm)

Decorative plate

(mm)

Projector size

(mm)

Distance from ceiling to false ceiling

(mm)

Load

(kg)

Arm

(Sections)

Model.

www.logicav.inwww.logicav.in

OPERATION CAUTIONS:

Please refer to below procedures to check if the projector lift is out of order.

1.Make sure the power cord connected properly and be with regular power supply.

2.Do not operate it frequently.

3.Let the motor stop for 15 minutes, then turn it on again to check if the motor is in an overheating protection statement. If the

problem still remains unsolved, please contact with us or the dealers for further assistance. Please do not disasssembe or

change the structure by your own.

TROUBLESHOOTING:

We only recommend experience AV installers undertake these procedures.

If the new installation or used projector lift need to be checked, our company should be informed first, the operation should be

started only after approved, or this product is no longer covered under our warranty. Please check the ground protection in

advance before checking to avoid electric shock.

If the projector lift does not work

1.Restart it after 15 minutes o check if it’s in overheating projection statement or not.

2.Check both terminals of the power cord to see if the problem occurs by the power supply.

3.If the voltage is normal, please check if there’re any loose wires or burned fuse occured.

4.When the whole lift need to be disassembled and maintained. Lay the lift flat, disassemble the cover plate with cross

screwdriver, to maintain and repair the electrical or mechanical parts.

Inhaltsverzeichnis

Andere Logic Hebesystem Handbücher

Logic

Logic LG-EPM100 Bedienungsanleitung

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung