Logicube Sonix Bedienungsanleitung

Logicube Confidential Information

the Best Solution

for Hard Drive

Duplication & Back-Up

Logicube Confidential Information

Logicube’s Sonix Training

1. INTRODUCTION

2. Attaching Drives

– Parallel (IDE)

– Serial ATA (SATA)

– Other Types

3. User Interface

4. Main Menu Functions

5. Cloning Modes

– Clever Clone

– Verify

– Direction

– CHS Mode

– Speed

– On Error

– Printer

6. Selective Partitions

7. Mirror Clone 100%

8. Master Manager

9. Mirror Clone

10. USB Drive Mode

11. Scan Target Mode

12. Repair Target Mode

13. WipeClean Target Mode

14. Software Setup

– Compact Flash

– Compact Flash To USB

15. Conclusion

Logicube Confidential Information

The Sonix™ System provides access to

IDE, EIDE, UDMA, SCSI, SATA, 1.8",

laptop, and Compact Flash drives.

The built-in UDMA 4 Engine allows

direct-to-drive, high-speed (3.3

GB/min.) access through the IDE

and SATA ports.

Gain Access to Anything

Logicube Confidential Information

Clone Many Different Ways

Direct to IDE & SATA drives or thru

USB to IDE & SCSI Drives.

Several optional adapters provide

access to 1.8”, 2.5” and Compact

Flash card drives.

The optional CloneCard PRO

attaches from the Sonix™ IDE port

and provides access to laptop or

notebook drives through the

PCMCIA slot.

Logicube Confidential Information

Embedded Software

Mirror Copy™

– Produces a straight bit-for-bit clone.

CleverCopy ™

– Copies data areas only, skipping blank sectors.

Scales partitions to fit target. Supports all DOS,

Windows 95, 98, 2000, NT and XP.

MasterManager ™

– Creates a multiple partition (up to 24) master drive

by adding partitions from different sources.

Selective Partitions ™

– Select one, some, or all partitions from your

master drive for endless combinations.

Logicube Confidential Information

Attaching Drives

The Logicube Sonix™ is able to detect whether an IDE

(parallel) or Serial ATA (SATA) drive is attached to the

Master or Target position. The unit is capable of cloning

to/from a SATA drive to an IDE drive and vice versa (as

well as IDE to IDE and SATA to SATA).

–Note: Never attach both an IDE and SATA drive to the

Master or Target position. The unit can only handle one

drive on each position.

–Important: Before applying power perform the steps

listed in the following exercises:

Logicube Confidential Information

Attaching Drives - Parallel (IDE) Part 1

1. Open the Logicube Sonix™ by

pressing on the two latches at the

base of the unit and lifting the top. You

will notice three connections: One for

a flat cable (the drive data cable) and

another for a small drive power cable.

Underneath is the third connector for

the Serial ATA cable.

2. Connect a Master hard drive and

close the Logicube Sonix™ .

3. Plug in the set of 9” cables, to the

connections found on the back of the

Logicube Sonix™ .

Logicube Confidential Information

Attaching Drives - Parallel (IDE) Part 2

4. Connect the Target drive to these

cables.

–Note: The internal drive is always

referred to as the Master drive and

the outside drive is always referred

to as the Target drive.

5. Connect the external power supply

to the Logicube Sonix™ and power-

up the unit. In 2 – 3 seconds, the

main “Splash” screen appears.

Logicube Confidential Information

Attaching Drives - Serial ATA (SATA) Part 1

1. Open the Logicube Sonix™ by

pressing on the two latches at the

base of the unit and lifting the top.

2. Connect a Master hard drive and

close the Logicube Sonix™ . Make

sure that Pin 1 (with the Red Stripe)

is properly aligned.

3. Plug in the long SATA cable to

the connections found on the back

of the Logicube Sonix™ .

2. Pin 1



Logicube Confidential Information

Attaching Drives - Serial ATA (SATA) Part 2

4. Connect the Target drive to

this cable.

5. Connect the power supply to

the Logicube Sonix™ and

power-up the unit. In 2-3

seconds, the main display

appears.

Inhaltsverzeichnis

Andere Logicube Computerhardware Handbücher

Logicube

Logicube ZCLONE Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung