Logik L03CTEL10 Bedienungsanleitung
Instruction Manual
Corded Desk Telephone
with Speakerphone
L03CTEL10
Contents
Safety First .................................................................................................. 4
Unpacking................................................................................................... 6
Getting Started ........................................................................................... 7
Locating the Battery Compartment .....................................................................7
Battery Installation and Replacement .................................................................7
Connecting the telephone line cable ..................................................................8
Connecting the handset cable...............................................................................8
Mounting Stand (Optional)........................................................................ 9
For Wall Mounting.......................................................................................................9
For Desk Mounting.................................................................................................. 10
Control Overview...................................................................................... 11
Preparation ...............................................................................................13
Setting up your phone .......................................................................................... 13
Setting up Time and Date ..................................................................................... 13
Setting up LCD Contrast ........................................................................................ 13
Setting up Flash Time ............................................................................................. 14
Operation ..................................................................................................15
To Make a call............................................................................................................. 15
To Receive a call ........................................................................................................ 15
Switch between Handset and Speakerphone............................................... 15
To Adjust the Speakerphone volume ............................................................... 15
To Mute a call............................................................................................................. 15
To End a call................................................................................................................ 15
To Redial a call ........................................................................................................... 15
Use in a PBX (Private Branch Exchange) system............................................ 16
Storing a number in One-touch Memory (M1, M2, M3)............................. 16
Make a call using One-touch Memory (M1, M2, M3)................................... 16
Storing a number in Two-touch Memory (MEM).......................................... 16
Make a call using Two-touch Memory.............................................................. 16
Hints and Tips............................................................................................17
Specications............................................................................................18
4
Safety First
For your continued safety and to reduce the risk of injury or electric shock, please
follow all the safety precautions listed below.
• Read all instructions carefully before using the telephone and keep them for future
reference.
• Retain the manual. If you pass the telephone onto a third party, make sure to
include this manual.
• Follow all warnings and instructions marked on the telephone.
• Do not use the product near water for example near a bathtub, kitchen sink, etc.
• Place the product securely on a stable surface. Serious damage and/or injury may
result if the product falls.
• Do not cover slots and openings on the telephone. They are provided for ventilation
and protection against overheating. Never place the telephone near radiators, or in
places with poor ventilation.
• Do not place objects on the telephone cable. Install the phone where no one can
step or trip on the telephone cable.
• To reduce the risk of injury or electric shock, do not disassemble the telephone.
Incorrect reassembly can cause electric shock when the product is subsequently
used.
• During thunderstorms, avoid using telephones except cordless types. There may be
risk of an electric shock from lightning.
• Do not use the telephone to report a gas leak, when in the vicinity of the leak.
• Young children should be supervised to ensure that they do not play with the
telephone.
• The telephone is not intended for use by persons (including children) with reduced
sensory or mental capabilities, or lack of experience and knowledge unless they
have been given supervision or instructions concerning the use of the phone by a
person responsible for their safety.
5
CAUTION:
Installation
• Never install telephone wiring during a lightning storm.
• Never install a telephone wall socket in wet locations unless it is specically
designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• The telephone is designed for use on vertical walls constructed of solid brick, solid
concrete, solid wood and solid wood columns. It is the installers’responsibility to
verify that the wall structure/surface will safely support the total load (combined
weight of telephone base and handset). If the installers have any uncertainties
about the wall structure/surface, they must contact a qualied installer.
• Do not use this product for any applications other than its intended purpose.
• Do not over tighten the screws.
6
Thank youfor purchasing your new Logik
Corded Desk Telephone with Speakerphone.
We recommend that you spend some time to read this Instruction
Manual in order to fully understand how to install and operate it.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose
of it please do so according to local regulations.
Handset Cord
Telephone Line CordHandset
Mounting Stand
Instruction Manual
Main Unit
P R
0
7 8 9
4 5 6
1 2 3
#
ABC
M1 M2 M3
DEL
CDS
DEF
SET/
STO
GHI
PQRS TUV
WXYZ
JKL MNO
MEM
LNR
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0344 800 3456 for assistance.
Instruction
Manual
7
Getting Started
Locating the Battery Compartment
The battery compartment is located at the
bottom of the unit.
Battery Installation and Replacement
• Press and hold the battery compartment cover.
• Lift the cover up.
• Insert 2 AAA alkaline batteries into the compartment. Make sure to
match the polarities as per indicated in the battery compartment.
• Flip down the cover and push it down until it clicks shut.
Press and hold
Lift
Before removing the battery compartment
cover, always make sure the telephone is
disconnected from the telephone line.
• Please do not use rechargeable batteries in this unit.
• Batteries are not included with this unit.
• When the battery power is low, the icon will show on the LCD display screen.
Replace the batteries before they are completely discharged, and the display
screen is gone, otherwise all previous memories and settings will be lost.
8
Connecting the telephone line cable
Plug the telephone line cable into
the socket on the base. Plug the
other end into the telephone wall
socket.
Connecting the handset cable
Plug one end of the handset cable
into the handset socket and the
other end into the socket at the
side of the base.
To single-line
telephone
socket
• If you want to use the phone on a desk or flat surface, press the telephone line
cable into the groove on the underside of the base so that the phone sits flat.
• If you want to wall mount the phone, please refer to the Wall Mounting section.
9
Mounting Stand (Optional)
For Wall Mounting
1. Drill 2 holes in the wall.
2. Insert the wall plugs into the holes.
3. Drive in the screws and make sure to leave approximately 5mm of the
screw head from the wall to hold the base securely.
Wall
Wall plug Screw
Wall plug Screw
92 mm
M1
ABC
GHI
1
M2 M3
DEL
CDS
4
PQRS
P
7
2DEF
SET/
STO
3
MNO
6
WXYZ
9
#
JKL
5
TUV
8
0
R
MEM
LNR
Insert the mounting stand onto the bottom of the telephone. This stand
will balance the telephone position when it is mounted onto the wall.
Before you drill any holes, make sure there is no electrical wiring or pipes hidden
in the wall.
10
For Desk Mounting
Follow the diagrams below to remove the mounting stand from the
bottom of the telephone.
Insert the mounting stand onto the top of the telephone.
M1
1
M2 M3
DEL
CDS
2
ABC
4
GHI
7
PQRS
5
JKL
8
TUV
0
P
R
LNR
#
3
DEF
6
MNO
9
WXYZ
MEM
SET/
STO
Inhaltsverzeichnis
Andere Logik Telefon Handbücher
