Logitech Cordless internet handset Bedienungsanleitung

Logitech®

Cordless Internet Handset

for Skype™

Setup



Welcome

Your new Logitech® Cordless Internet Handset for Skype™ is an easy-to-use premium handset that will make

Skype™ use even more enjoyable. We hope that you will enjoy this product and the freedom of using Skype™

away from your PC.

Because the handset interfaces directly with the Skype™ application on your PC, you will need to have

Skype™ and the Logitech® Cordless Internet Handset software running on your PC for the handset to function

properly. As your PC will need to be turned on, the phone will not work in the case of a power outage, nor is it

intended to replace a standard landline in the case of an emergency.

For your convenience, calls answered on the PC can be transfered to the handset, however calls answered or

made on the handset will remain on the handset until you hang up.

Welcome



Environment and Safety

Safety Information

This handset is not designed for making emergency telephone calls: it will not function when the power fails!

You should secure an alternative phone for emergency calls.

Power Requirements

The computer will provide power to the USB Base Station through the USB connection.

Battery Requirements

The handset requires a power source of two rechargeable NiMH batteries, size AAA 1.2V 750mAh (HR11/45)

(provided). Do not use non-rechargeable batteries.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Use only

rechargeable batteries. Never use non-rechargeable batteries; use recommended type supplied with this

telephone. NiMH batteries must be disposed of in accordance with the applicable waste disposal

regulations.

WARNING! The only way to remove power from the battery charger is by unplugging the power

supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus

and is always easily accessible.

WARNING! The electrical network is classied as dangerous according to criteria in the

standard IEC 60950. The only way to remove power from this product is by unplugging the

power supply from the electrical outlet. Ensure the electrical outlet is located close to the

apparatus and is always easily accessible.

Privacy

Privacy of communications may not be ensured when using this telephone.

Environmental Care

Please remember to observe the local regulations regarding the disposal of your packaging materials,

exhausted batteries and old phone, and where possible, promote their recycling.

Your phone can interfere with electrical equipment such as answering machines, TV and radio sets if placed

too close. It is recommended that you position the base unit at least one meter from such appliances.

Environment and Safety



Headings

Safety

BATTERIES

• Use only the battery type listed in the instruction

manual. Do not use lithium, alkaline or any other

rechargeable batteries except those that are specied.

• Do not dispose of the battery in a re, as they explode.

• Do not open or mutilate the battery. Released

electrolyte is corrosive and can cause damage to the

eyes or skin. It can be toxic if swallowed.

• Avoid contact with metal objects when handling the

battery. These objects could short out the batteries or

cause the conductor to overheat resulting in burns.

• Do not attempt to recharge the battery cell by heating

it. Sudden release of battery electrolyte can cause

burns or irritation to the eyes or skin.

• Observe the proper polarity, or direction, of any battery.

Reverse insertion of the battery cell can result in

leakage or explosion.

• Remove the battery cells if you do not plan to use the

product for several months at a time.

• Discard any “dead” batteries because they are likely to

leak into the product.

• Do not store this product or the battery in a high tem-

perature area. Battery stored in a freezer or refrigerator

should be protected from condensation during storage

and defrosting. Battery should be stabilized at room

temperature before using.

• Your battery is rechargeable and should be recycled

once it outlives its usefulness. Depending upon your

local and state law, it might be illegal to dispose of this

battery into a municipal waste system. Check with your

local solid waste company for more information on your

recycling options for the battery cells.

• CAUTION: The batteries used in this device may present

a risk of re, explosion, or chemical burn if mistreated.

Do not disassemble, crush or heat above 100°C (212°F)

or incinerate (expose to re). Replace batteries ONLY

with AAA, NiMH rechargeable type batteries.

Do not use lithium batteries or any other type not

specied for use. Use of another battery type or

mixing battery types may present a risk of re or

explosion. Insert batteries according to the marked

polarities in the battery compartment. Dispose of used

batteries promptly and properly in accordance with the

applicable local recycling or waste disposal regulations.

Keep away from children.

Headings

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Do not use this product near intensive care medical

equipment or by persons with pacemakers.

• This product should be operated only from the type of

power source indicated on the label.

• Do not allow the charging contacts of the charger

or the battery to come into contact with extraneous

conductive materials.

• Do not use handset in an explosive hazard area such as

where there is gas leaking.

• Place apparatus in a stable location so it will not fall

causing product damage or bodily harm.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not push objects into apparatus vents or slots

because re or electric shock hazards could result.

• Ventilation should not be impeded by covering the

ventilation openings with items, such as newspapers,

table clothes, curtains, etc.

• No naked (open) ame sources, such as lighted candles,

should be placed on or near the apparatus.

• Do not install near any heat sources such as radiators,

heat registers, stoves or other apparatus (including

ampliers) that produce heat.

• Protect the power cord from being walked on or

pinched particulary at plugs, convenience receptacles

and the point where they exit from the apparatus.

• Only use attachments/accessories specied by the

manufacturer.

• Unplug this apparatus during lightning storms or when

unused for long periods of time.

• Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been

dropped.

• The apparatus shall be disconnected from the mains by

unplugging the power cord of the apparatus from the

AC mains receptacle.

• The socket-outlet shall be installed near the equipment

and shall be easily accessible.

WARNING:

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

CAUTION: RISK OF EXPLOSION IF BATTERY IS

REPLACED WITH INCORRECT TYPE

IMPORTANT SAFETY INFORMATION

CAUTION

ELECTRIC SHOCK HAZARD

BEFORE USING YOUR LOGITECH® PRODUCT, BASIC SAFETY PRECAUTIONS SHOUD ALWAYS BE FOLLOWED TO

REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY, INCLUDING THE FOLLOWING:

Safety

SAVE THESE INSTRUCTIONS

1. Soft Keys

The functions of the soft keys are displayed on

the LCD right above the soft keys.

1a. Left Soft Key

1b. Right Soft Key

. Navigation Key

• Use to navigate the menus.

• During Standby mode:

Press UP to view the Skype™ Contact List.

Press DOWN to view the Phonebook entry.

Press LEFT to go to the Skype™ Menu.

Press RIGHT to go to the Callers List

. Talk (R/FLASH) Key

• Use to make and receive calls.

• Use to send ash signals.

• Use to answer second incoming call.

. End (ON/OFF) Key

• Use to end a call.

• Use to exit menus.

• Use to switch the phone on/off.

5. Star & Ringer Off Key

• Use to turn the ringer on/off.

6. Pound, Key lock & Pause Key

• Use to enter a pause.

• Use to lock the keypad.

7. Intercom Key

• Use to enter the intercom menu.

NOTE: Intercom requires the use of two or

more handsets.

8. Skype™ Key

• Use to access Skype™ contact list

9. Calls Key

• Use to enter the call records menu.

10. LED

• Blinks during an incoming call.

• Blinks during paging.

• Blinks steady when there is new voicemail

waiting.

• Turn on steadily during a call.

11. Page Key

• Use to page the handset. Use to register a

handset.

1. LED

• On when the handset is properly placed on

the charger base and charging.

Setting Up Your Phone

Handset Overview

Setting Up Your Phone

System Requirements

In order to use the phone, your computer should meet the following minimum requirements:

• PC running Windows® 2000 or XP

• 400 MHz processor

• 128 MB RAM

• Free USB slot on the PC

• Broadband internet connection

Software Installation

Run the software setup before plugging in the USB

Base Station. The software installation wizard will

prompt you when to plug in the USB Base Station.

1. Turn on your PC.

2. Insert the setup disk into your computer.

3. Installation wizard should automatically start; if it

does not start, go to your CD-ROM drive and click

Logitech_Setup.exe.

4. The installation wizard will guide you through the

installation; when nished, a shortcut icon will be

created on your desktop.

5. Install the Base Station only when prompted by the

software wizard.

Windows 000 SP1 and SP

If your operation system is Windows 2000 SP1 and SP2,

you will need to restart your PC before using the phone.

Setting Up Your Phone

Charging your internet handset

1. Place the 2 rechargeable NiMH AAA batteries

(included), observing their polarities, into the

battery compartment on the handset.

Slide the battery door rmly into place.

Plug charger base power adapter (provided)

into the charger base and into a wall outlet.

2. Place the handset on the charger, make sure

the LED on the charger is on and let the

batteries charge for a full 14 hours before

using it for the rst time.

Handset may get warm during initial charge.

Please note that handset may not turn ON for up to 15

minutes if the batteries are low.

CAUTION: Use only the mains adapter supplied

with this handset. Incorrect adapter polarity or voltage

can seriously damage the unit.

Setting Up Your Phone

Audio Settings Conguration

The software installation wizard should automatically congure the correct audio settings in

Windows® and Skype™. If however, you would like to manually adjust or verify these settings,

please follow these steps.

For Windows 000 user:

1. With the USB Base Station plugged into the USB port on your PC, click the Start button and select

CONTROL PANEL.

2. Click on Sounds and Multimedia.

3. Select Audio tab from Sounds and Multimedia Properties.

4. Check if your current speaker is selected in both Sound Playback/Sound Recording pulldown box.

5. Check Use Only Preferred Devices checkbox.

6. Press APPLY or OK to save your settings.

For Windows XP user:

1. With the USB Base Station plugged into the USB port on your PC, click the Start button and select

CONTROL PANEL.

2. Click on Sounds and Audio devices.

3. Select Audio tab from Sounds and Audio Devices.

4. Check if your current speaker is selected in both Sound Playback/Sound Recording pulldown box.

5. Check Use Only Default Devices checkbox.

6. Press APPLY or OK to save your settings.

Using the Handset after installing the software:

1. If it is not already, plug in the USB base to your computer.

2. The software driver should automatically load whenever

Skype™ is launched. If the USB driver has not started

yet, start the USB driver by double clicking on the

shortcut icon created on your desktop; Skype™ should

automatically start with the driver.

3. The software driver allows the phone to communicate

with Skype™. If you see the following screen, select

“Allow this program to use Skype™” and click OK.

4. Once both Skype™ and the base are detected, your

phone is ready for use. Your current Skype™ online status

should be shown on the phone’s display.

About the USB Driver

Once the USB driver is installed on your PC, it should auto start when you start the PC; a tray icon will be

shown when the USB driver is loaded.

Inhaltsverzeichnis

Andere Logitech Mobilteil Handbücher

Logitech

Logitech Zone True Wireless Bedienungsanleitung

Beliebte Mobilteil Handbücher anderer Marken

Swissvoice

Swissvoice ePure HD Bedienungsanleitung

Philips

Philips TD6736/BH051P Bedienungsanleitung

ASCOM

ASCOM I62 - Bedienungsanleitung

LG-Ericsson

LG-Ericsson LIP-9010 Bedienungsanleitung

GE 1583 Bedienungsanleitung

iiNet

iiNet Handset Bedienungsanleitung

ASCOM

ASCOM 9p23 Bedienungsanleitung

AT&T

AT&T DLP70110 Bedienungsanleitung

AirCell

AirCell ST 3100 Bedienungsanleitung

Eaton

Eaton HHIR-LCD-PROG Montageanleitung

Mitel

Mitel 112 Bedienungsanleitung

SBC

SBC SBC-381H Bedienungsanleitung

Mitel

Mitel 5602 Bedienungsanleitung

ASCOM

ASCOM d81 Messenger Montageanleitung

SpectraLink

SpectraLink 7522 Bedienungsanleitung

Avaya

Avaya L100 Series Anleitung zur Verwendung

ooma

ooma HD2 Handset Bedienungsanleitung

Yealink

Yealink IPW56 Bedienungsanleitung