Logitrans Level Control LC4 Bedienungsanleitung

Level Control LC4

ELF/ELFS_SELF/SELFS

A warning label with the below text must be

attached to the equipment:

Black lettering on yellow background:

Remote controlled

lifting equipment

The operator must stand with a full view of the

lifting and lowering movements of the equipment.

Clearances around the equipment must be

checked before operating. No extraneous objects

must be placed under the equipment.

MAKE SURE that neither forks nor load snag

extraneous objects during lifting and lowering.

- See also the instruction manual for

the lifting equipment.

1.0 Optimum safety...

NOTE! Manual operating of the handle is not

possible when the level control is active.

NOTE!

ELF/ELFS

The brake has to be activated before using the level

control.

2.0 How to operate the Level Control

Push “Power ON” and the green lamp is on.

The lifting equipment can start lifting/lowering.

Upwards or downwards positioning can be

chosen on the arrows (up/down).

The red lamp (A) is ashing, when the level control

is active.

The forks raise/lower after setting the time

delay.

Reading of settings

Use button (B) to choose:

• Detection range

• Time delay before operation

• Actual distance

When reading the setting values, the respective

lamps for detection range and time delay before

operation are on.

30°

The photocell can be turned 30° to the right or

left.

NOTE! The photocell must point across the

pallet.

Due to safety the lowering movement will stop

automatically at a fork height of approx. 200 mm.

Programming of detection range and time delay

before operation

1. Press “Power on”. The green lamp is on. The lifting

equipment can start lifting/lowering automatically.

2. Use button (B) – choose the requested settings,

detection range or time delay before operation (the

lamp of the chosen setting lightens)..

3. Press the button (B) 3 seconds. The lamp of the

chosen setting ashes, when programming is

possible. The setting value is shown in the display.

4. Use the arrows (up/down) to change the value.

Detection range: 0,1m (min)

to 2,0 m (max)

Time

delay before operation

00 s (min)

to 25 s (max)

5. After 10 seconds the unit will store the value and

return to normal operations.

2.0 How to operate the Level Control

Error codes

E0 Power consumption Main

E1 Power consumption: UP

E2 Power consumption: DOWN

E3 Power consumption: OUT (white)

E4 -

E5 External brake

In case of errors, the display and the red lamp will ash.

Errors are deleted when the unit is turned o󰀨 and switched on again.

If the error turns up again after turning o󰀨 and switching on the unit, please

contact your dealer.

The height of the photo cell can be adjusted on

the thumbscrew.

2.0 How to operate the Level Control

S1082

120619

Level control LC4 - EN

Inhaltsverzeichnis

Andere logitrans Gabelstapler Handbücher

logitrans

logitrans LOGIFLEX SELF1003 Bedienungsanleitung

logitrans

logitrans ELF 1001/1200 Bedienungsanleitung

logitrans

logitrans PANTHER MAXI AC Bedienungsanleitung

logitrans

logitrans EHL 1004 Leitfaden

logitrans

logitrans LOGIFLEX SELF 1001 Bedienungsanleitung

logitrans

logitrans ROTATOR ELFR Bedienungsanleitung

logitrans

logitrans SGL/Panther Bedienungsanleitung

logitrans

logitrans ROTATOR SELFR Bedienungsanleitung

logitrans

logitrans LOGIFLEX SELFR Series Bedienungsanleitung

logitrans

logitrans HS 1000RF-SEMI Bedienungsanleitung

logitrans

logitrans LOGIFLEX SELF MAXI Bedienungsanleitung

logitrans

logitrans Logiflex ELF1201 Bedienungsanleitung

logitrans

logitrans EHS 1000RF-SEMI Bedienungsanleitung

logitrans

logitrans Logiflex Betriebsanleitung

logitrans

logitrans Twin Stacker Bedienungsanleitung

logitrans

logitrans EHS Stainless 1000/1400 Bedienungsanleitung

logitrans

logitrans LOGIFLEX ELFR Bedienungsanleitung

logitrans

logitrans WSP 2200 Bedienungsanleitung

logitrans

logitrans LOGIFLEX ELF Betriebsanleitung

logitrans

logitrans LOGIFLEX ELF Bedienungsanleitung

Beliebte Gabelstapler Handbücher anderer Marken

Hyster

Hyster G108 Betriebsanleitung

ep ESL122 Bedienungsanleitung

Cascade

Cascade D Series Handbuch

Daewoo

Daewoo D35S-2 Handbuch

Konecranes

Konecranes SMV 10-600B Bedienungsanleitung

Cascade

Cascade G Series Bedienungsanleitung

Manitou

Manitou MC 40 Powershift Bedienungsanleitung

Hyundai

Hyundai 50DS-7E Bedienungsanleitung

Pegasolift

Pegasolift W12 Montageanleitung

Multi-Mover

Multi-Mover XXL 10 TO Bedienungsanleitung

Noblelift

Noblelift PT 20I Handbuch

Lifter

Lifter QX 20 EVO Bedienungsanleitung

Noblelift

Noblelift SPN22 Handbuch

Noblelift

Noblelift PT 27R Handbuch

Noblelift

Noblelift PS30RM Handbuch

Noblelift

Noblelift PS35LSL Handbuch

Noblelift

Noblelift PT E30 Handbuch

Still

Still CX-M 10 Bedienungsanleitung

logitrans Level Control LC4 Bedienungsanleitung

Beliebte Gabelstapler Handbücher anderer Marken