LogRite T30 Bedienungsanleitung

Tractor Arch

T30, T36

Packing List

60 Industrial Park Rd

Vernon, CT 06066

www.logrite.com

800-631-4791

a. arch frame (qty 1)

b. center truss (qty 1)

c. drop tongue w/ winch and cable (qty 1)

d. safety chain (on drop tongue) (qty 1)

e. tires (qty 2)

f. 5/8” - 11 x 3 1/2” hex head bolts (qty 2)

g. 5/8” - 11 locking nuts (qty 2)

h. 1/2” washers (qty 8)

i. 1/2” - 13 lock nuts (qty 4)

j. 1/2” - 13 x 2” bolts (qty 4)

k. lug nuts T30- (qty 10), T36- (qty 12)

l. winch handle (qty 1)

m. 5/16” fender washer (qty 1)

n. 5/16” washer (qty 1)

o. 5/16” x 3/4” bolt (qty 1)

p. ratchet strap (qty 1)

q. snatch block (qty 1)

r. oblong ring (qty 1)

s shackle (qty 1)

t. doubler (qty 1)

u. Owner’s Manuals

Serial # _____________________

Packed by ___________________

40036-000

60 Industrial Park Rd

Vernon, CT 06066

www.logrite.com

800-631-4791

T30 and T36 Tractor Arch Owner’s Manual

You will ﬁnd this implement handy if you have a tractor and any reason to move logs. You will be

able to move logs your tractor could only dream about before. The ground will remain virtually

undisturbed and the logs will stay clean for sawing. The arch is a steel structure with minimal

working parts so it is easy to maintain. It is equipped to be pulled from a drawbar hitch with a 2” ball.

The logs are lifted into the arch with a hand winch.

Read all instructions including the winch manufacturer’s instruction manual before using.

Remain constantly aware that safe operating is your responsibility.

High forces are created when using a winch, creating potential safety hazards. It should be

operated and maintained in accordance with instructions. Never allow children or anyone

not familiar with the operation of a winch to use it. A winch accident could result in personal

injury.

Tractor arches are designed to move logs, poles, and beams only.

Do NOT use the arch to move logs on any public road.

Do NOT lift the arch when loaded.

Should the load begin to fall out of control when operating, do NOT attempt to stop the

spinning winch handle with your hands or any part of your body.

Check winch for proper operation on each use. Do NOT use if damaged. Seek immediate

repairs.

T36 with Fetching arch as tag axle.

While the tractor arches are great for pulling, they

have limited mobility and safety limits in the forest

environment. If there is any serious sloping terrain

in your operation, please think seriously of keeping

to the road and use a winch line to bring logs to the

tractor. If you are using your arch primarily on

sloped terrain, you may consider adding electric

brakes.

40037-000 page 1 of 5

When unpacking arch parts from the pallet, please have two people

working, as parts are heavy and may be cumbersome.

Assembly

•Remove all parts from pallet.

•Place drop tongue section into the center truss. Use a 5/8” - 11 x 3 1/2” hex head bolt and a 5/8” - 11

locking nut, bolt into place tightly, as this is only done once (pic A).

•Place the center truss and drop tongue into the arch frame and bolt with a 5/8” - 11 x 3 1/2” hex head bolt

and a 5/8” - 11locking nut. Tighten with a 15/16” wrench.

•Use 1/2” - 13 X 2” bolts, 1/2” washers and 1/2” - 13 lock nuts to secure the truss to both the arch frame and

drop tongue (pic. B). Tighten with 3/4” wrench.

•Thread winch handle onto input shaft of winch.

•Load 5/16” x 3/4” bolt with 5/16” fender washer and 5/16” washer. Use this to attach winch handle to the

winch (pic C)*. Tighten with a 1/2” wrench.

•Wind out enough cable to reach the back of the arch.

•Release the thumb screw on the snatch block (pulley) and mount it to the oblong ring. Use the shackle to

connect the ring and snatch block through the center hole in the snatch block plate below the arch (pic D).

Install the winch line through the snatch block, make sure the bell is on the same side as the nubbin. Close

snatch block and replace the thumb screw.

arch

section

center

truss

drop

tongue

pic A

pic C

pic B

5/16” x 3/4” bolt

5/16” fender washer

winch handle

5/16” washer

pic D

*This is a modiﬁcation to Dutton-Lainson's B3500 winch handle operation.

40037-000 page 2 of 5



40037-000 page 3 of 5

Use

To pick up a log, you can back over the log or use the winch cable to pull the log into the arch.

The arch is designed to pick up the weight of the log instead of the tractor. The amount of the log

that is in the arch determines how much of the log weight will be picked up. If the log is 16’ (T30)

or 18’ (T36) or less the entire log can be suspended.

Straddle the arch over the midpoint of the log. Now you are ready to choke the log and winch it

into the arch.

Lifting logs 3500 to 4000 (T30) or 6000 (T36) lbs

The doubler bell (pic E) must be used for logs in this weight range. The doubling option is when

you hook the winch line into the doubler bell instead of the bell attached to the end of the winch

line, this allows the log to act as a second pulley (pic F). Then hook the doubler to one of the four

chains welded to the arch. Using the doubling option allows you to get the needed 6000 lbs of lift

from the winch. Determining which chain fall to use will depend on the size and shape of your

log. When using the doubler, the snatch block will move to one side and the bell to the other,

allowing the log to rise much higher into the arch.

Lifting smaller logs

On smaller and lighter logs, the winch line is hooked to itself and the winch line picks up the log

(pic G).

Carrying a fully suspended log

After the winching operation be sure to secure the load. Use the provided strap to hold the log at

the ring on the reach of the arch just behind the drop tongue.

Pro tip: On longer logs(over 16’, 18’), there will be a slight drag. This tail drag is often a slight

advantage, as the log will trail straight behind the arch. It might also be used as resistance when

on a gentle slope.

pic F

pic G

pic E



40037-000 page 4 of 5

Adjusting the tongue weight

The arches are designed to have a neutral tongue weight. However, depending on your load it

may be necessary to change the tongue weight.

Logs loaded with more weight extending out from the arch can cause negative tongue weight.

This can cause the tractor to become unstable. Lower the log giving yourself some extra cable to

work with. Detach the shackle and change the attachment of the snatch block to the front hole in

the snatch block plate on the front of the arch (pic H).

Attaching the snatch block to the back hole is recommended when there is too much tongue

weight.

front hole for too little

tongue weight

back hole for too much

tongue weight

pic H

Winch Operating Instructions

A slight modiﬁcation was made to your winch to allow the operator to unwind the cable without

a load. To release the cable from the winch turn the handle in counterclockwise direction. Now

by pulling gently on the winch cable you can free spool until the desired amount of cable has

been released. Do NOT attempt to stop the spinning winch handle with your hands or any part

of your body. If too much tension is placed on the cable the brake will be engaged and stop the

release of cable.

After choking the log, wind the handle in clockwise direction to lift the load. The braking winch

is designed to keep the load in position when the handle is released, but for extra security it is

recommended that the handle be turned clockwise until at least two clicks are heard. This will

add extra tightness to the brake mechanism. Always make sure that the winch is holding the

load before releasing the winch handle.

To lower the load, wind the winch handle counterclockwise until the load is on the ground and

the cable is slack enough to work with.



40037-000 page 5 of 5

Maintenance

•Check the coupler, winch and snatch blocks daily.

•Inspect winch cable on every use. Replace cable at the ﬁrst signs of

kinks, broken wires, deformation or any other damage.

•Keep the winch line unsnarled.

•Pack the hubs with grease annually or after heavy use.

•Keep tires at recommended pressure.

•See Dutton-Laison owner’s manual for proper winch maintenance.

Speciﬁc Applications (Items can be locally sourced.)

The tractor arches have provisions for mounting a power winch in the front or rear receivers.

Use the front receiver to pull the arch with its load out of an area which is difﬁcult to reach with

your tractor. Use the rear receiver mount to pull logs to the arch and tractor.

If you will be using your arch primarily on sloped terrain, you may consider adding electric

brakes.

The rear receiver mount can be ﬁtted with a light bar to be used when moving the arch to the

job site.

Additional Information for Using the Winch

•Break in the new winch cable.

•Take a little extra time to pull out cable slack before winching.

•NEVER pull all the cable out of your winch (always leave at least three wraps of cable on the

spool).

•Brace yourself when winching in a log. Take out the slack then grab onto the arch with your

free hand.

•Always lower the load in control.

•Should the load begin to fall out of control when operating, do NOT attempt to stop the

spinning winch handle with your hands or any part of your body.

•Operate with hand power only. This winch must not be operated with a motor of any kind. If

the winch cannot be cranked easily with one hand, it is probably overloaded.

60 Industrial Park Rd

Vernon, CT 06066

800-631-4791

Logrite.com

info@logrite.com

Warranty Statement for Log Arches

LogRite Tools believes that log arches of our manufacture are of quality

construction and superior design. We urge our customer to closely inspect

their purchases immediately upon receipt. If anything is not satisfactory,

it will be immediately repaired or replaced at our cost and decision.

If during the course of use, any of our products fail structurally or fails

to perform the tasks it is designed for and represented as, LogRite Tools

will do everything to make the product perform as intended.

If during the course of use, the product is not performing as represented,

LogRite Tools invites the owner to call our toll free line for a

discussion of uses and techniques, including how to use the products in

order to achieve satisfactory results.

This warranty is intended for the original owner and for the period of 2

years. With correct use and maintenance LogRite products will provide

a lifetime of use.

This warranty does not imply any liability to the uses of the products,

which are at the discretion of the owner.

If there are any questions as to the extent or applicability of this warranty,

please call immediately to resolve these questions.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LogRite Industrieanlagen Handbücher

LogRite

LogRite Junior Arch Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Rioned

Rioned UrbanJet Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung