Longshine CRANE 1 Bedienungsanleitung

Tech Manual

CRANE 1

Fanless Full Flat Touch Screen POS System

Version 1.0

Table of Contents

System Disassembly…………………………………………….….....................3

A Before You Start………………………………………………………….....3

B Remove all the Peripherals (MSR, Customer Display) from the POS

Unit.......................................................................................................4

C Disconnect the Devices from the I/O Ports…………………………….5

a. Unplug the cables from the POS Unit………….……………………....5

D Remove the HDD/SSD Drive from the POS Unit…………………….....6

E Detach the Panel Unit (with Main Board) from the Base Unit…….7-9

F Panel Unit (with Main Board Set)...................................................10-16

a. Remove the HDD/SSD Drive from the Modular Main Board Set….10

b. Disconnect the Touch Controller from the Main Board……….........11

c. Remove Main Board from the Panel Unit…………………………….12

d. Remove the RAM Module……………………………………………...13

e. Remove the Metal Bracket of Bottom I/O Port……………………….14

f. Detach the LCD Panel from the Front Bezel Set…………………….15

g. Detach the LCD Panel from the Metal Bracket………………………16

G Cable management.............................................................................17

H Assemble the second display............................................................18

System Disassembly

A Before You Start

To prevent injuries to the LCD Panel: Carefully place the POS terminal on

a flat, clean and stable surface (for example: a stable long table).

Prepare additional cushioned material (for example: a soft, clean blanket).

Terminate the application running in the POS system, and shut down the

operation system.

Turn-off the power of POS terminal and optional peripherals (for example:

Thermal Receipt Printer, Secondary LCD Display).

Disconnect all the devices or cables connected to the POS terminal.

Disconnect and remove the power adaptor from the POS terminal.

Unplug the power cables from the electrical outlet.

Note:

There are no serviceable parts or components in the POS system or

peripherals.DO NOT modify any parts of POS systems or use

non-qualified parts or peripherals.

Store the disconnect parts, cables, devices and screws in a secure

location for further use.

For maintenance or replacement, please consult the technical personnel

and contact the sales for purchasing the new peripherals and parts.

B Remove All the Peripherals (MSR, Customer display) from

the POS Unit

Please refer to the User Manual for the instructions of installation and

disconnection procedures.

Pos Unit with MSR

( )

Pos Unit with Customer Display

( )

Pos unit without optional peripherals

( )

Note:

Always store the detached parts in a secure location for further use.

C Disconnect the Devices from the I/O Ports

There are some of the optional peripherals or devices installed onto the pos system.

Please detach the peripherals/devices and store them in a secure location.

Note:

Please turn off the whole POS system and devices before unplugging the cables from

the I/O Ports.

a. Unplug the cables from the POS Unit.

1. Place the POS terminal onto a stable and flat location.

2. Lift up the whole POS Unit and examine the bottom I/O Ports of POS Unit.

3. Disconnect all of the connected cables on the bottom I/O Ports.

Bottom I/O Ports with power cable connected

Bottom I/O Ports without power cable connected.

Note:

Always store the detached parts in a secure location for further use.

D Remove the HDD/SSD Drive from POS Unit

1. Remove the Protective Cover.

2. Remove the Screws of the

Protective Cover.

3. Pull out the HDD Drive Module

HDD Drive Module

(The appearance of the HDD will

vary because of different batches

products)

E Detach the Panel Unit (with Main Board) from the Base Unit

1. Remove the Two Screws of the Back Cover

2. Lift the Back Cover

3. Disconnect the Cable in the Machine

4. Remove the power switch and SSD slot

power switch (Left) and power switch (right)

5. Remove the Four Screws of the Main board.

6. Remove the VAG interface with 6-point screws.

7. Remove the 3 Screws of the I/O Plate.

I/O PLATE

8. Remove the 6 Screws of the I/O Plate.

9. Touch monitor plate

10.LCD Screen

11.Back shell

F Back Cover Unit (with Main Board Set)

a. Remove the HDD Drive from the Modular Main Board Set

1. Use a screw driver to remove the 4 screws of the metal SSD Slot.

Back Cover with Main Board

Set

Loosen the Securing Screws

on the Metal HDD Slot

Metal HDD Slot

Inhaltsverzeichnis

Andere Longshine Touch-Terminal Handbücher

Longshine

Longshine COBRA15 Bedienungsanleitung

Longshine

Longshine POS GFT-150 Series Bedienungsanleitung

Longshine

Longshine GFT-150 Series Bedienungsanleitung

Longshine

Longshine RCT150 Bedienungsanleitung

Longshine

Longshine COBRA15 Bedienungsanleitung

Longshine

Longshine GFT-150 Series Bedienungsanleitung

Longshine

Longshine RDT-150F Series Bedienungsanleitung

Longshine

Longshine 15IW Series Bedienungsanleitung

Longshine

Longshine POS GT-150 Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung