Lorex SHS-4QM Series Bedienungsanleitung

SHS-4QM SERIES Quick Set-Up Guide R1

The SHS System comes with the following components:

• Quad Processor

• 2 x Weatherproof Color Cameras with Stands

• 2 x Weatherproof Color Day/Night IR Cameras with Stands

• 4 x 60’ DIN Extension Cables

• DIN Video Cable

• Remote Control

• Power Adapter

Getting Started

QUAD SURVEILLANCE SYSTEM

WITH 4 CCD INDOOR/OUTDOOR CAMERAS*

Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cables

* IR illumination range up to 16 ft. (5M) under ideal conditions. Objects at or beyond this range may be partially or completely obscured,

depending on the camera application. Picture changes from Color to B&W under low light conditions.

* Note that the IR Night Vision Cameras have a black lens cover.

A. Connect Cameras

Check your package to conﬁrm that you have received the

complete system, including all components shown above.

Connect the female end of the supplied 60’

extension’ cable to the camera.

NOTE: Confirm that the arrows

on the DIN Camera Cable and the

DIN Extension cable are aligned

when connecting the cable. If the

pins in the DIN Cable are bent, the

Camera will NOT function.

Connect the male end of the supplied 60’

extension cable to an open DIN channel on

the back of the Quad Processor. Continue

connecting additional DIN cameras.

NOTE: The arrow on

the DIN Connector

Connector should

be facing up when

connecting it to the

Quad Processor.

Connect the DIN end of the Video Cable to the Quad Processor. Connect the RCA VIdeo cable

to the TV, VCR or Monitor.

B. Connecting the DIN Video Cable

Connectivity Diagram

TV / VCR / MONITOR

Connect the Yellow RCA

connector to the TV Video IN

Port (yellow)

QUAD PROCESSOR

Connect the DIN Cable end

to the Video Output port

SHS CABLE

RCA to DIN Cable

TV / VCR / MONITOR 4 x CAMERAS POWER ADAPTER

DIN CABLE QUAD PROCESSOR

SHS-4QM SERIES

QUICK SET-UP GUIDE

www.lorexcctv.com

Night Vision

Cameras Day Use

Cameras

4 x 60’ EXTENSION CABLES

STEP 1

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Time Tools Skills - Easy

Under 10 Minutes* Hand Tools Plug & Play connectors, On

screen set up

* Installation time may vary based

on application and camera cabling

It’s all on the Web

For detailed setup information, please

refer to your User’s Manual. For additional

information, please visit our website

www.lorexcctv.com/support

www.lorexcctv.com

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Time Tools Skills - Easy

Under 20 Minutes* Hand Tools Plug & Play connectors, On

screen set up

* Installation time may vary based

on application and camera cabling

SHS-4QM SERIES Quick Set-Up Guide R1 www.lorexcctv.com

C: Access the Event Setup Menu

• Use the arrow keys to navigate

• Press ENTER to turn on ALARM EVENT

REPORTING for each camera detecting

Motion.

• Press ENTER to turn on MOTION EVENT

REPORTING for each camera detecting

Motion.

• When Motion is detected, the SHS

system will switch to the Camera, and an

audible alarm will sound.

Event Setup

Menu Set-up

A: Access the Menu System

• Press the MENU button for 3 seconds to

enter Menu Mode.

• Press the buttons to navigate

within the Menu and choose the desired

selection.

• Press the ENTER button to accept the

selection.

• Press the MENU button to Exit the Menu

Setup.

Full Function Remote Control with Multiple Viewing Modes

• Use the arrows to move between

cameras.

• Use the arrows to move between

Menu Settings.

• Set the Motion Detection Time as

desired (Always ON, OFF or for a

speciﬁc timeframe).

• Set the Sensitivity (amount of motion

needed to trigger an alarm) and the

Velocity (speed of motion needed to

trigger an alarm).

• Set the Masking Area:

· Use the arrow keys to navigate

through grid.

· Press the ENTER button to select or

deselect a square on the grid.

· Areas set to detect motion are not

shaded. Masked areas in blue do not

detect motion.

· Each area (grid square) must be

selected individually.

• Press the MENU button to Exit. All

settings will be saved.

Motion Setup

B: Enter the Motion Setup Menu

PIP Dual PIP

Split Quad

Freeze

Zoom

SHS-4QM SERIES

QUICK SET-UP GUIDE

STEP 2

MENU, MOTION SENSING

& EVENT SET-UP

Andere Handbücher für SHS-4QM Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lorex Sicherheitssystem Handbücher

Lorex

Lorex LW2702 series Bedienungsanleitung

Lorex

Lorex SG6350 Bedienungsanleitung

Lorex

Lorex WA-410 Bedienungsanleitung

Lorex

Lorex SG19LD804-161 Installationsanleitung

Lorex

Lorex LW2002B Series Bedienungsanleitung

Lorex

Lorex SG21FD3044-161 Bedienerhandbuch

Lorex

Lorex L19WD Series Bedienungsanleitung

Lorex

Lorex LH314321 Leitfaden

Lorex

Lorex L17LD420 Series Bedienungsanleitung

Lorex

Lorex LW2201 Series Bedienungsanleitung

Lorex

Lorex LW2902 Bedienungsanleitung

Lorex

Lorex LW2002 Series Bedienungsanleitung

Lorex

Lorex LW1012 Series Bedienungsanleitung

Lorex

Lorex LW2201 Series Bedienungsanleitung

Lorex

Lorex L19LD800 Series Bedienungsanleitung

Lorex

Lorex LW2201 Series Bedienungsanleitung

Lorex

Lorex SG21FD3044-161 Bedienungsanleitung

Lorex

Lorex SG21CD7444UQ-A80 Bedienungsanleitung

Lorex

Lorex L204 Bedienungsanleitung

Lorex

Lorex L23WD SERIES Bedienungsanleitung

Lorex

Lorex L19LD1600 Series Bedienungsanleitung

Lorex

Lorex LW2700 SERIES Bedienungsanleitung

Lorex

Lorex L14Q684C Bedienungsanleitung

Lorex

Lorex SG6331 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung