Lorex L19LD1600 Series Bedienungsanleitung

www.lorexcctv.com

LOREX CLIENT 5.0

Integrated Remote

Agent Software

Instruction Manual

English Version 1.0

MODEL:

L19LD1600 Series

Table of Contents

System Requirements ............................................................................... 3

Lorex Integrated Remote Agent Software Installation .......................... 4~5

Integrated Remote Agent Software - Main Screen ................................... 6

Lorex Client 5.0 Software - Main Screen .................................................. 7

Lorex Client 5.0 Software .................................................................... 8~14

Lorex Backup .................................................................................... 15~20

Remote Setup ......................................................................................... 21

IRS Setup .......................................................................................... 22~23

H.264 Viewer .................................................................................... 24~25

Remote Access with the DDNS Service ................................................. 26

IP & MAC Address ..................................................................................................................... 27

Finding Your External IP Address ............................................................................................. 27

Router Port Forwarding ............................................................................................................. 28

Setting Up Your DDNS Account ................................................................................................ 29

DDNS SETUP ........................................................................................................................... 31

My Connection Information ........................................................................................................ 32

Lorex Client 5.0 Remote Access Setup .................................................. 33

Remote Viewing with Internet Explorer ............................................. 34~35

Data Backup with Internet Explorer .................................................. 36~38

About the Lorex Client 5.0

The Lorex Client 5.0 software package allows you to access your Observation System from a

remote location to view live and previously recorded video.

• View and Record from your PC - Connect your Observation System to your Network

• Minimum System Requirements: Windows XP, Pentium 4 processor with 512MB RAM

recommended

Please visit us on the web for the most current Manuals, Quick Start

Guides and Firmware. Additional Language Manuals are also available at:

http://www.lorexcctv.com

System Requirements

The Lorex Client 5.0 software (included with the Observation System) has the following

installation requirements.

Operating System Windows 2000

Windows XP Home Edition

Windows XP Professional

Processor .Pentium 4 - 1.5 GHz Processor (or equivalent)

Memory 256 MB RAM (512 Recommended)

Hard Drive 50 MB - Installation space required

*Additional Hard Drive space required for recording.

Recorded file size will vary depending on recording

quality settings

Minimum System Requirements:

Recommended System Requirements:

Operating System Windows XP Home Edition

Windows XP Professional

Processor Pentium 4 / 3 GHz Processor (or equivalent)

Memory 1024 MB RAM

Hard Drive 50 MB - Installation space required

*Additional Hard Drive space required for recording.

Recorded file size will vary depending on recording

quality settings

Internet Requirements Requires a high speed internet connection (minimum

upload speed: 256Kb/s, download speed512Kb/s) and a

broadband router – not included.

Typical network remote viewing at 1-2FPS. It is

recommended to use the H.264 Viewer for higher speed

over the network.

Please check with your Internet Provider for your current

upload and download speeds.

Please refer to the Lorex Client 5.0 Software User Guide included with your Observation System

for further details. Visit the Lorex support website at http://www.lorexcctv.com for information on

Windows Vista compatibility.

Lorex Integrated Remote Agent Software Installation

Place the Installation CD in the CD-ROM Drive of your Computer. Select the Install Wizard for

the Lorex Client 5.0 Software to begin.

1. Click the NEXT button on all dialogue windows to continue the Installation:

2. Press the Install Button to initialize the installation process.

NOTE: If the Installation Process does not automatically start, you will have to begin the

installation process manually:

• Double Click the MY COMPUTER icon on your Desktop

• Double Click the CD-ROM DRIVE (Drive Letter will vary depending on the number of drives

in your computer)

• Double Click the LOREXCLIENT.EXE file (may appear as LOREX CLIENT with no file

extension, depending on your system settings.

The Installation Process will begin.

Lorex Integrated Remote Agent Software Installation

Program Shortcuts

• Start Menu - Programs - Lorex Client

zLorex Internet Remote Software

• Desktop Shortcut for:

zLorex Internet Remote Software

3. The installation process will continue. Once the install is complete, press the Finish button.

NOTE: Make sure to close all open programs and save any open files before rebooting the

system.

Lorex Internet

Remote Software

Integrated Remote Agent Software - Main Screen

The Lorex Client allows you to remotely connect to your system, and view live images.

1. Lorex Client 5.0 - Used to remotely connect and view video from the remote system in JPEG2000

compression.

2. Lorex Backup - Used to connect to the System, and retrieve data backup to the local PC.

3. Lorex Player 5.0 - Used to playback data retrieved using the Lorex Backup.

4. Remote Setup - Configuration and setup for remote access.

5. IRS Setup - Used to configure the DDNS Settings (must be setup prior to using the H.264 Viewer).

6. H.264 Viewer - Used to remotely connect and view video from the remote System in H.264

compression.

7. Exit - Exits the Integrated Remote Access program.

1. Lorex Client 5.0 2. Lorex Backup 3. Lorex Player 5.0

4. Remote Access Setup 5. IRS Setup (for H.264 Viewer) 6. H.264 Viewer

7. Exit

Lorex Client 5.0 Software - Main Screen

The Lorex Client allows you to remotely connect to your system, and view live images.

NOTE: Remote viewing or playback is dependant on your connection speed, internet traffic and

other network factors - the speed is normally 1~2 FPS (frames per second).

1. MAIN SCREEN - Displays live Camera images (delays in images are due to Network speed

and connectivity strength).

2. CONNECTION STATUS- Displays the Observation System connection status. Also shows the

current Time & Date.

1. Main Screen - Camera View 2. Connection Status 3. Screen View

4. PTZ Controls 5. Sequence View 6. Camera Selection Buttons

7. Connect

6 7 8 9 10 11

10. Setup 11. Exit

8. Disconnect 9. Playback

Lorex Client 5.0 Software

3. SCREEN VIEW- Changes the live camera view between Single Channel, Quad, 9 and 16

Channel views.

4. PTZ CONTROL BUTTONS - Controls Cameras with PTZ & Focus configured

(refer to the Instruction Manual for the Observation System). Additional setup

within the Lorex Client 5.0 is required for PTZ Camera functionality. PTZ

Cameras are not included with the system.

• Zoom / Focus - Use the +/- buttons to zoom/focus in and out.

• Pan/Tilt Controls - Use the arrows to control the Pan/Tilt of the camera.

• PTZ ID - Displays the camera (PTZ ID) currently under control.

5. SEQUENCE - Changes the onscreen view to Sequence Mode (sequence between Cam 1~16)

6. CAMERA SELECTION BUTTONS - Press buttons 1~4 to select a Camera Number for display.

7. CONNECT - Connect to the Observation System (based on the settings configured in the Setup

Menu).

8. DISCONNECT - Disconnects from the Observation System.

9. PLAYBACK - Accesses previously recorded data for playback on the Lorex Client 5.0 Software.

This option is only available when you are remotely connected to the system.

10. SETUP - Enters the Setup Menu for remote connection to the Observation System.

11. EXIT- Closes the Lorex Client 5.0 software.

1. Main Screen - Camera View 2. Connection Status 3. Screen View

4. PTZ Controls 5. Sequence View 6. Camera Selection Buttons

7. Connect

10. Setup 11. Exit

8. Disconnect 9. Playback

Lorex Client 5.0 Software

Setup & Configuration Menu

The Setup Menu contains the information to allow the user to remotely connect to

the Observation System.

IP/PORT Tab

1. NAME - Enter a name for the Observation System Connection (i.e. System, Office, etc.)

2. ADDRESS - Enter the IP address for the DVR if directly connected to a Modem. If the Observation

System is connected to a router, you will be assigned an IP address automatically.

3. USER ID - Enter the User ID ‘ADMIN’

4. ADDRESS LIST - Provides a listing of all previously configured Observation Systems.

5. MANUAL / DDNS - Changes the connection type between using a Manual Setup or using a

DDNS setup for connection. See Remote Access with the DDNS Service section for DDNS

configuration and use.

6. PORT - Enter the port number for the Observation System (50000 by default).

Lorex Client 5.0 Software

DDNS Tab

NOTE: This tab only becomes active if the DDNS Button is selected on the IP/PORT Tab.

1. USER NAME - Enter the name used during the DDNS Setup process. See Remote Access

with the DDNS Service section for DDNS configuration and use.

2. DVR NAME - Enter the name used during the DDNS Setup process. See Remote Access with

the DDNS Service section for DDNS configuration and use.

3. SAVE - Saves the current settings to the DDNS List.

4. LOAD - Opens the DDNS List (DDNS Loader Window). Previous

configurations can be loaded and deleted from this screen.

7. PASSWORD - Enter the Admin password for the Observation System (blank by default).

8. SAVE / DELETE - Save the current settings. To delete an existing setting, choose it from the

list (see #4), and press DELETE.

9. OK / CANCEL - Press OK to accept the current screen, or press CANCEL to exit.

Andere Handbücher für L19LD1600 Series

Inhaltsverzeichnis

Andere Lorex Software Handbücher

Lorex

Lorex L19LD800 Series Bedienungsanleitung

Lorex

Lorex L15LD420 SERIES Bedienungsanleitung

Lorex

Lorex L504 Bedienungsanleitung

Lorex

Lorex SG17LD800 Bedienungsanleitung

Lorex

Lorex QLR-0440 Series Service-Handbuch

Lorex

Lorex SG19LD804-161 Bedienungsanleitung

Lorex

Lorex L15LD400 series Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung