Lovibond Tintometer TB 350 Bedienungsanleitung

Lovibond®Water Testing

Tintometer®Group

Turbidimeter

TB 350



Quick Start Guide....................3

Kurzanleitung........................ 28

Guía de inicio rápido.............54

Guide de démarrage

rapide......................................80

Guia de Início Rápido..........107

Manuale breve..................... 133

Snelstartgids........................159

Hızlı başlangıç Kılavuzu..... 185

Краткое руководство

пользователя..................... 211

快速启动指南......................... 237

1 Introduction

ENTB 350 3

1 Introduction

1.1 General Information

1.1.1 Read instructions before use

This manual provides important information on the safe operation of the product. Please

read this manual carefully and familiarize yourself with the product before use.

1.1.2 Purpose of the Product

The TB Series Portable Turbidimeter isdesigned to analyze aqueous samples that are

collected into a glass vial that is then capped. The vial is prepared for measurement

using a scrupulous technique to minimize interferences from dust and scratches. Once

prepared, the vial is placed in the instrument for measurement.

The instrument can be used in the laboratory or taken to the field to perform

measurements on samples as they are collected.

The handling of this turbidimeter should be done with care during any transport. If

the instrument is taken into the field, the carrying case should be used. If used for

regulatory applications, consultation with the local regulatory authorities is advised to

ensure the correct model of instrument is selected.

1.1.3 Authorized use

The manufacturer's liability and warranty for damage is voided with improper use, failure

to follow this manual, use by unqualified personnel, or unauthorized changes to the

product.

The manufacturer is not liable for costs or damages that arise from the user or third

parties due to the use of this product, especially in cases of improper use of the product

or misuse or faults in the connection of the product.

The manufacturer assumes no liability for print errors.

1.1.4 Requirements for safe use

Note the following points for safe use of the unit:

• If the equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

• The product may only be used according to the authorized use specified above.

• The product may only be supplied with power by the energy sources mentioned in this

operating manual.

• The product may only be used under the environmental conditions mentioned in this

operating manual.

• The product must not be opened or modified.

The product must not be used if:

• it is visibly damaged (e.g. after being transported)

• it was stored under adverse conditions for a lengthy period of time (storage conditions,

see Chapter "Specifications")

1 Introduction

ENTB 3504

Prerequisites for safe use of the plug-in power supply unit

Observe the following points for safe use:

• Check for visible damage before use. If damaged, do not put into operation.

• Use only in dry rooms.

• Handle only with dry hands.

• Only the power supply recommended by the manufacturer may be used.

• The product must not be opened or modified.

• Only the USB-C cable recommended by the manufacturermay be used to power the

device.

1.1.5 Keep instructions

The manual must be kept in the vicinity of the product so you can always find the

information you need.

1.1.6 User qualification

The operating personnel must be able to understand and correctly implement the safety

labels and safety instructions on the packages and inserts of the products.

The user must be capable and able to read and understand this manual in order to

familiarize themselves with the handling and to ensure safe use.

1.1.7 Handling of hazardous chemicals

Chemical and/or biological hazards may exist where this product is used. Abide by all

governing laws, regulations and protocols when using this product.

For the development of products, Lovibond® pays close attention to safety. Some

hazards from dangerous substances cannot be avoided. If self-produced tests or

solutions are used, the responsibility concerning any risks caused by those tests or

solutions lies with the user (personal responsibility).



For your own protection, for turbidity standards greater than 5 NTU, wearing protective

gloves or goggles is recommended. Observe the relevant safety data sheet.

The safety datasheets of the chemicals comprise all instructions on safe handling,

occurring hazards, preventive actions and actions to take in hazardous situations.

1.1.8 Disposal notes

Dispose of the batteries and electrical devices at a suitable facility according to local

legal requirements.

It is illegal to dispose of the batteries with household waste.

Within the European Union, the batteries are removed at a specialized treatment center

at the instrument's end of life.

Instruments marked with this symbol must not be disposed of in

normal domestic waste.

1 Introduction

ENTB 350 5

1.2 List of all used signs in the document

The following symbols are used in this manual to identify sections that require special

attention:

Danger!

A hazard exists that will result in death or severe injury if not

avoided.

Warning!

Improper handling of certain reagents can cause damage to your

health. In any case follow the safety labels on the packing, the safety

instructions of the package insert and available SDS. Protective

measuresspecified there have to be followed exactly.

Caution!

A hazard exists that may result in minor or moderate injury.

1.3 Abbreviations

Abbreviation Definition

NTU Nephelometric Turbidity Unit

FNU Formazin Nephelometric Units

mg/l Milligram per liter

2 Product overview

ENTB 3506

2 Product overview

2.1 Guide to symbols

• Labels attached to the product should be strictly observed to avoid personal injury or

damage to the product. Refer to this chapterfor information regarding the nature of the

danger or risk before taking any action where such label is present.

For professional users in the European Union:

If you wish to discard electrical and electronic equipment (EEE),

please contact your dealer or supplier for further information.

For disposal in countries outside of the European Union:

This symbol is only valid in the European Union (EU). If you wish to

discard this product please contact your local authorities or dealer

and ask for the correct method of disposal.



2.2 Certification

EMC Conducted and

radiated emissions

CISPR 11

(Class A Limits)

CE mark

EMC Immunity EN 61326-1

(Industrial limits)

CE mark

Safety EN 61010-1 TÜV safety mark

FCC FCC Class A FCC mark

FCC Class A Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, includinginterference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at their expense.

2 Product overview

ENTB 350 7

Shielded Cables

Caution!

Connections between the system and its peripherals must be made using

shielded cables in order to maintain compliance with FCC radio frequency

emission limits.

Modifications

Caution!

Any modifications made to this device that are not approved by

Tintometer may void the authority granted to the user by the FCC to

operate this equipment.

DOC Class A Notice - Avis DOC, Class A

This Class A digital apparatus meets all requirements of the Canadian Interference-

Causing Equipment Regulations.

2.3 Features

Laboratory accuracy meets portability

The Lovibond® TB Series eliminates the complexities in turbidity measurement. This

new technology provides the highest level of accuracy, operational and regulatory

efficiencies.

• Touchscreen interface for ease of operation

• Guided routine procedures to eliminate errors

• Straightforward data management protocols to ensure data integrity

2 Product overview

ENTB 3508

2.4 Instrument view

Position Description Function

1. Lid When lifted, allows the user to place

the sample cell in the instrument for a

reading.

2. Power button Powers the instrument ON and OFF.

3. Touch Screen Displays the user interface of the

instrument.

4. Model Number Identifies instrument version.

5. USB-C Port Supplies power to the instrument from

an external source or will re-charge the

battery pack accessory (if installed).

756

6. USB-A Port Supports external USB-A device for

functions such as data transfer or

backups.

7. Plug Used to cover USB-C and USB ports

when connections are not in use.

3 Commissioning

ENTB 350 9

3 Commissioning

3.1 Operating environment

The instrument can be used in any indoor or outdoor environment that is deemed safe

for an operator to perform the analysis.

The instrument can accept aqueous samples from 0 to 70 °C.

The instrument should be level± 15 °when performing a measurement.

The instrument should be placed on a level surface to achieve the best measurement

performance.

3 Commissioning

ENTB 35010

3.3 Inserting and replacing the batteries

When using batteries



Step Description

1Use a screwdriver to remove the four screws on the back of the

instrument and remove the panel.

2Insert four AA batteries in the correct orientation.

3Attach the panel back onto the instrument.



Caution!

• Only use the approved type: alkaline manganese battery,

LR6, with 1.5V voltage.

• Remove empty batteries from the unit as soon as possible.

• If the unit is not used for a long time, remove the batteries

from the unit.



Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Lovibond Prüfgeräte Handbücher

Lovibond

Lovibond Scuba II Bedienungsanleitung

Lovibond

Lovibond TB 350 Bedienungsanleitung

Lovibond

Lovibond BD 600 Bedienungsanleitung

Lovibond

Lovibond MINIKIT Bedienungsanleitung

Lovibond

Lovibond EComparator Series Montageanleitung

Lovibond

Lovibond MD 100 Bedienungsanleitung

Lovibond

Lovibond RD 125 Bedienungsanleitung

Lovibond

Lovibond SD 80 Bedienungsanleitung

Lovibond

Lovibond MINIKIT Bedienungsanleitung

Lovibond

Lovibond Pooltester pH-Br Bedienungsanleitung

Lovibond

Lovibond MD 100 Betriebsanleitung

Lovibond

Lovibond Scuba II Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung