LS&S TIM-220-320-3410 Bedienungsanleitung
Talking Travel Alarm Clock 4 Buttons
TIM-220-320-3410
Operating Instructions
Functional Description:
•Time announcement, alarm with three different sounds to choose
from, snooze, and hourly chime.
Changing the Batteries:
•Open the battery cover and put two new AAA batteries ensuring they
are in the right position.
Mode Functions:
•Press ‘MODE’ to change the functional modes according to the
following direction:
oNormal/Time Mode
oTime Setting Mode
oAlarm Setting Mode
Set Time:
•Starting from the time display mode, press ‘MODE’ to enter the time
setting mode.
•Press ‘MIN’ to adjust the minutes.
•Press ‘HOUR’ to adjust the hour.
Set Alarm Time:
•Starting from the time display mode, press ‘MODE’ to enter the alarm
setting mode. The ‘AL’ symbol will display with blinking numbers.
•Press ‘MIN’ to adjust the minutes.
•Press ‘HOUR’ to adjust the hour.
Choosing the alarm sound and turning the alarm on/off:
•In normal time display, press the ‘HOUR’ button to choose between
the three different alarm sounds and to turn the alarm on or off.
•When going through the alarm sounds, it will play that sound and the
alarm time will also appear on the display. Choosing a sound will
automatically turn on the alarm.
•When setting the alarm time without any alarm sound, the alarm
function is off (you will hear a ‘Di’ sound).
Turning hourly announcement on/off:
•Starting from the time display mode, press ‘MIN’ to activate (you will
see a symbol)
•Press ‘MIN’ again to deactivate the hourly announcement (you will see
no symbol)
Snooze Function:
•When the alarm sounds, press the ‘TALK’ button to stop the alarm and
start the snooze function
•The alarm will sound again every five minutes after the snooze starts
•The alarm will sound six times before ceasing completely
Listen to the alarm sound:
•In normal time display mode, press and hold the ‘TALK' button. This
will play the alarm sound after announcing the current time.
Remarks:
•Avoid exposing the clock to extreme temperatures, water or severe
shock.
•Avoid contact with chemicals.
•Don’t subject the clock to conditions of high temperature, excessive
humidity, dust and shock.
•Only use fresh batteries - don’t use old batteries or mix old and new.
•Only a professional can repair the clock.
Inhaltsverzeichnis
Andere LS&S Wecker Handbücher
