Ltech WiFi-103 Bedienungsanleitung

T3-CCT3-CV

Model: WiFi-103

T1 T2 T3 WiFi-103

www.l tech-led. com

WiFi-103 Technical Parameters:

Output Current:

Max Output Power:

Output Control:

Input Voltage:

4A×3CH Max 12A

144W/288W(12V/24V)

12~24Vdc

Max 100m

Software Technical Parameters:

Android 2.1 or Above, iOS 5.1 or

Above, With the WiFi Function

Android (1.8MB), iOS (5.6MB)

Tool

Free, No Plug-ins

English

Platform:

Single Color, CT, RGB LEDs

1. Product Parameter:

Control Distance:

RGB Change Mode:

Scene Mode:

Operating Temp.:

Dimensions:

Package Size:

Weight (G.W):

Size:

Language:

Category:

Others:

3. Controller Operating Instructions:

Side A Side B

RUN:

LINK:

RX/TX:

The indicator light flashes quickly about 25s during the electric initialization. Flashes once per second

after initialization finished.

The indicator light stays lit when the mobile device connects to WiFi-103, and turns off when disconnect.

The indicator light turns on when WiFi-103 receives or transmits the WiFi data. Turns off in the

free time.

Manufacturer

interface

SSID

code

switch

3.2 Work Status Indicator Instructions:

3.1 Install/Uninstall ANT:

Clockwise to install the WiFi-103 ANT,

counterclockwise to take off.

learning

button

ID Scene

button

Indicator

light

2. Configuration Diagram:

WiFi-103 is a WiFi lighting control system,

LED lighting products by installing the related APP on our iOS or Android mobile devices which support WiFi

connection. Supports connection directly or by router.

consists of APPs and WiFi controller. Controls various types of

RGB 9 Modes, CT 3 Modes

-30℃~55 ℃

L128×W73×H45(mm)

L135×W80×H50(mm)

320g

32 Fixed Modes, 8 DIY Modes

Input Voltage:

Output Voltage:

Output Current:

Output Power:

Remote Distance:

Working Temp.:

Dimensions:

Package Size:

Weight (G.W.):

12-48Vdc

3-46Vdc

CC 350/700/1050mA×3CH

1.05W~48.3W×3CH Max 144.9W

50m (to WiFi-104)

-30℃~55℃

L175×W44×H30(mm)

L178×W48×H33(mm)

150g

T3-CC Receiving Controller (current 3 in 1)

Input Voltage:

Max Current Load:

Max Output Power:

Remote Distance:

5-24Vdc

6A×3CH Max 18A

T3-CV Receiving Controller

-30℃~55℃

L175×W44×H30(mm)

L178×W48×H33(mm)

140g

Working Temp.:

Dimensions:

Package Size:

Weight (G.W.):

90W/216W/432W(5V/12V/24V)

50m (to WiFi-104)

Communication

Standard:

2.4GHz Wi-Fi, 802,

11b/g/n Protocol

Dim, CT adjustment, RGB changing 3 in 1 operation, plus DIY programable function. Compatible with T1/T2/T3

RF work.

Note: Receiver is sold seperately.

WiFi-103 LED Controller WiFi-103 LED Controller

www.l tech-led. com

3.3 SSID Number Setting:

Use code switch to set the controller's SSID Number, WIFI-103-SSID-X, X stands for a certain No. ranging

from 0-F, totally 16 options. which means our product could set 16 isolated LAN in the same area. WiFi-103

will initialize with run LED indicator flashing about 25s quickly, each time the SSID NO. is changed. Mobile

devices need to search and connect WiFi again after Initialization finished.

3.4 “Match” Button and “Scene” Button:

Short press “SCENE” button to enter DIY scenes

sequentially, scene mode changes from 1 to 9 then

backwards.

4. The Instructions of APP Software:

4.1 WiFi-103 Software Installation:

Scan following QR code to download and install.

4.2.1 Network Connection Setting

4.2 Software Operating Instructions

Android scan for download

iOS scan for download

RGB scene interface CT scene interface

WiFi-103 support 2 modes: Direct connection as router or connect by additional router.

WiFi-103 Controller Direct Connection as Router :

Enter mobile device's WiFi setting, click the WiFi function,

mobile device search and list the working WiFi controller

automatically (As Figure-1), Click the SSID number to

connect (default is no password).

Apple WiFi connectionAndroid WiFi connection

( )Figure-1

[ Restore Factory Settings ]

Long press “MATCH” button and “SCENE” button simultaneously more than 2 seconds, the machine will

back to the default parameter, including the parameters of changing modes, and network parameters,

WiFi-103 controller restore as directly connect.

WiFi-103 LED ControllerWiFi-103 LED Controller

www.l tech-led. com

Delete WiFi-103

controller list

RGB driver mode

Disconnect to

WiFi-103

controller

Network

RGB/CT/DIM driver setting

Change the background

Connect to additional

router TP-LINK1

Workable WiFi-103

Connect to the WiFi-103 controller, the step as (4.2.1)same

Connection with an Additional Router:

Connnect WiFi-103 Controller to The Additional Router Network:

Click “Network” key to enter Network interface(as Figure-3-1), start "connect to exiting LAN", software

will search the workable WiFi net SSID list, choose the specified router to connect (Attn: do not choose

WiFi-103 controller), can add the WiFi-103 controller to the wireless router(as Figure-3-2 the wireless

router TP-LINK1)

( -2-1)Figure

( -3-1)Figure

( -2-2)Figure

Connect an additional router interface

WiFi-103 as a router interface

( -3-2)Figure

Click mobile device's icon to start the software, the software will search and list the working WiFi

controller automatically, and there is a blue wireless icon (as Figure-2-1)

Exit WiFi-103 software, enter mobile device setting-wireless network setting, choose the wireless router

to connect. Device List interface shows as Figure-2-2 when re-open the WiFi-103 software. Completes

the steps to connect to the additional router.

Repeat the ABC steps if you need connecting multiple WiFi-103 controller to this wireless router.

Connect to

WiFi-103

Manual searching the

WiFi-103 controller which

connect to the additional

router

In this connection mode, to avoid the mobile device automatically connect to WiFi-103 after the setting has

completed, please click on the connected WiFi-103 which under the mobile device "WiFi setting" and at the

message box please click "Forget this network" (apple iOS) or "Cancel save" (SUMSUNG mobile phone is

"forget") to cancel the save of WiFi-103 connection.

Attn:

WiFi-103 LED Controller

Android cancellation of the save of

WiFi-103 connection

Apple

WiFi-103 connection

cancellation of the save of

WiFi-103 LED Controller

www.l tech-led. com

4.2.2 RGB/CT/DIM Driver Color Wheel Interface:

4.2.3 RGB Linear Toning Interface :

RGB slider

4.2.4. RGB Scene Interface

RGB linear toning

interface

RGB value edited

Scene-save key

RGB value edited

Brightness slider

RGB color wheel

Click to enter linear toning interface in the .RGB mode with color wheel

RGB mode

On/Off

Parameter values

Brightness slider

Currently

selected

color

Color wheel

Driver

Changing mode

Linear Toning

Scene saving

DIY

Driver

interface

Scene

Dimming mode

CT mode

Driver Interface

Parameter values

Long press can change

the background scene

Scene

Long

press

Dynamic scene cycle play

RGB scene interface Scene background editing interface

Scene

Modify the scene nameScene saving interface

Can modify the scene name

4.2.5 RGB Save Scene Interface :

On the interface of RGB color wheel,

linear toning, and mode or DIY, click

to the scene-save interface.

WiFi-103 LED ControllerWiFi-103 LED Controller

www.l tech-led. com

4.2.6 CT Mode Interface :

910

Parameter

values

Scene

Save scene

CT mode Scene name

Modify the scene name

Setting

Mode interface

Changing mode selection

Speed slider

Brightness slider

Play/Pause

Scene saving

Mode

4.2.7 RGB Mode Interface :

Static Red

Static Green

Static Blue

Static Yellow

Static Purple

Static Cyan

Static White

RGB Jumping

7 Colors Jumping

White Strobe

7 Colors Strobe

Red Fade Out and Fade In

Green Fade Out and Fade In

Blue Fade Out and Fade In

Yellow Fade Out and Fade In

Purple Fade Out and Fade In

Tables of Changing Mode:

No. No.

Mode Mode

Cyan Fade Out and Fade In

White Fade Out and Fade In

RGB Fade Out and Fade In

Red/Green Gradual Alternately

Red/Blue Gradual Alternately

Green/Blue Gradual Alternately

Red/Yellow Gradual Alternately

Green/Cyan Gradual Alternately

Blue/Purple Gradual Alternately

Green/Yellow Gradual Alternately

Blue/Cyan Gradual Alternately

Red/Purple Gradual Alternately

Blue/White Gradual Alternately

Yellow/Purple/Cyan Gradual Alternately

RGB Gradual Alternately

Full Color Gradual Alternately

Speed/Brightness AdjustableComment:

On CT interface, select color temperature by

touching color wheel, then click , scene 1~3

start flash, select any one, the scene name

box will pop-up, you can rename the scene.

Click “OK” to save the current color temperature

as a scene; click “cancel” to cancel the save

operation.

After save, select any scene from 1~3 in the CT

interface, the corresponding scene changing

mode will pop-up immediately.

WiFi-103 LED ControllerWiFi-103 LED Controller

www.l tech-led. com

DIY interface

DIY

4.2.8 DIY Interface

For Example:

5. WiFi Network SSID Name and Password Setting

In Device List interface, click “Network” key to enter Network interface, select “Change SSID and Password”

(Click ” ” ) to enter User Setting interface. Typing new SSID name and password

. Click “Apply” key on the top right corner of the interface to save the changes.

(Min. 8 characters, consist

of 0-9, a-z and A-Z)

11 12

1.Device list interface 2.Network interface 3.Change SSID

name interface

In direct connection of the WiFi-103 as a router. Please exit software after changed the SSID name and

the password, then enter the mobile device system setting to reconnect the WiFi-103, In additional wireless

router connection, it only needs to click “ ” in Device List interface to search again the WiFi-103

controller after changed SSID name.

If you forget the WiFi network password, please simultaneously press “MATCH” button and “SCENE”

button more than 2s to restore the factory default settings, so that can delete the WiFi network password

(More details in page 3 [Restore factory settings])

[Attn]:

4.Change SSID

password interface

Jump/Gradual/Strobe

switching

Color box

Play/Pause

Scene saving

D1-D8 DIY mode Speed selection

Brightness selection

Long press color

box to delete color

Brightness slider

Color wheel

(select the color and saturation)

The sequence for 10 color boxes is black, red, black, green, black, blue, black, yellow, black, black, which means

8 colors was chosen in the above boxes, which is black, red, black, green, black, blue, black, yellow. For jump

type, this lighting effect will be red, green, blue, yellow 4 colors strobe. For gradual type, this lighting effect will

be red fade-in and fade-out, green fade-in and fade-out, blue fade-in and fade-out, yellow fade-in and fade-out.

WiFi-103 LED ControllerWiFi-103 LED Controller

www.l tech-led. com

6. The Remote Operating Instructions

7. Conjunction Diagram:

6.1 The Learning Method of T1/T2/T3 to WiFi-103

6.2 Function Definition of Remote Control Keys

Dimensions:

Package Size:

Weight (G.W):

L145×W55×H22mm

L168×W102×H28mm

235g

T1/T2 T3 Technical Parameters:/

5Vdc

<30mA

2.4GHz

30m

1000mAh

Charging Voltage:

Working Current:

Working Frequency:

RF Remote Distance:

Battery Capacity:

Note: Remote is sold separately.

Attn: Different types of remote learning operation, will change WiFi-103 control mode directly (single color, color

temperature and RGB mode).

Touch circle Touch circle

Brightness

shortcut keys

Brightness keys

Sync status

indicator light

30s delay off key

1 hour delay off key

1-9

Scene-save

keys

On/Off

Speed+/Speed-

CT+/CT-

Scene-save keys

shortcut keys

BRT+/BRT-

Sync status

Indicator light

Delay off keys

Brightness

Shortcut keys

Mode keys

Touch color circle

Speed keys

Brightness keys

Sync status

indicator light

On/off

Pause key

Scene-save

keys

7.1 Connecting with The LEDs

Learning ID:

Cancelling ID:

Short press ID learning button “MATCH” on WiFi-103, buzzer beep once,

long press any key (except “On/Off”) on remote within 5s until the remote

indicator light flashes 3 times (meanwhile the buzzer long beep), means

the controlling between remote and WiFi-103 is activated.

Long press “MATCH” button on WiFi-103 (over 5s) till the buzzer long

beep, means all the remotes learned with WiFi-103 cancelled.

WiFi-103 LED ControllerWiFi-103 LED Controller

www.l tech-led. com

7.3 Connect By a Router

7.2 Diagram of Wireless Slave Control:

Add T3-CV/T3-CC if needed.

Method to Sync T3-CV/T3-CC to WiFi-103:

Learning ID:

Canceling ID:

Long press the “SCENE” button on the WiFi-103 controller until the buzzer long

beep (RUN light flash quickly), and then short press the ID learning button on

the T3-CV/T3-CC, the buzzer long beep again. Learning ID successful.

Long press the “SCENE” button on the WiFi-103 controller until the buzzer long

beep twice, cancel all the T3-CV/T3-CC learned with WiFi-103 controller.

WiFi-103 LED ControllerWiFi-103 LED Controller

www.l tech-led. com

17 18

9. Warranty Agreement

8.1 The product shall be installed and serviced by the qualified person.

8.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please

mounted in a water proof enclosure.

ensure it is

8.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.

8.4 Please check if the output voltage of the LED power supply used comply with the working voltage of the

product.

8.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry

Please also ensure that the cable is secured tightly in the connector.

the current.

8.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages to the lights.

8.7 If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.

9.1 We provide lifelong technical assistance with this product:

A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement if

cover manufacturing faults only.

For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.

9.2 Warranty exclusions below:

Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.

The product appears to have excessive physical damage.

Damage due to natural disasters and force majeure.

Warranty label, fragile label and unique barcode label have been damaged.

The product has been replaced by a brand new product.

9.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer. We shall

not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.

9.4 Any amendment or adjustment to this warranty must be approved in writing by our company only.

★ This manual only applies to this model. We reserve the right to make changes without prior notice.

8. Attention

Update time: 2016.10.12

Remote

7.4 Remote Distance Reference

[Attn]: The following distance is measured at open environment, in unopened environment, testing wireless

distance will be reduced. Please refer to the actual test distance before installation.

WiFi-103 LED ControllerWiFi-103 LED Controller

www.l tech-led. com

Inhaltsverzeichnis

Andere Ltech Controller Handbücher

Ltech

Ltech DMX-BT-AUDIO Bedienungsanleitung

Ltech

Ltech LT-3800-6A Bedienungsanleitung

Ltech

Ltech LT-3800-5A Bedienungsanleitung

Ltech

Ltech LT-3900IR Bedienungsanleitung

Ltech

Ltech LT-3800-5A Montageanleitung

Ltech

Ltech LT-3900 Bedienungsanleitung

Ltech

Ltech LT-312RF Bedienungsanleitung

Ltech

Ltech T4 Bedienungsanleitung

Ltech

Ltech V3 Bedienungsanleitung

Ltech

Ltech LT-3600RF Bedienungsanleitung

Ltech

Ltech WiFi-101-CT Bedienungsanleitung

Ltech

Ltech WiFi-101-RGBW Bedienungsanleitung

Ltech

Ltech LT-200 Bedienungsanleitung

Ltech

Ltech LT-311 Bedienungsanleitung

Ltech

Ltech WiFi-RDM01 Bedienungsanleitung

Ltech

Ltech WiFi-102-CT Bedienungsanleitung

Ltech

Ltech LT-3600 Bedienungsanleitung

Ltech

Ltech LT-3600RF Bedienungsanleitung

Ltech

Ltech LT-3600RF Bedienungsanleitung

Ltech

Ltech LT-3800-6A Bedienungsanleitung

Ltech

Ltech T3 Series Bedienungsanleitung

Ltech

Ltech SPI-16 Bedienungsanleitung

Ltech

Ltech WiFi-102 LED Controller Bedienungsanleitung

Ltech

Ltech 101 CT Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch