Dimming interface: 0-10V (1-10V/10VPWM/RX), Push DIM.
T-PWM™ digital dimming.
Withsoft-onandfadeinfunction,visualmorecomfortable.
Automatic recognition of 0-10V, 1-10V input signal.
Dimming range: 0~100%, LED start at 0.01% possible.
0-100% flicker-free,High frequency exemption level.
Innovative thermal management technology, intelligent power life protection.
Multiple current & wide voltage, suitable for different power LED.
Non-load output voltage 0V to prevent damages to LED caused by poor contact.
Short circuit / Over-heat / Over load / Non-load protection, recover automatically.
Suitable for internal lights application forⅠ/Ⅱ/Ⅲ.
Up to 50,000-hour life time.
5 years warranty (Rubycon capacitor).
LED
Intelligent Driver
AD-15-100-700-E1A1 AD-25-150-900-E1A1 AD-36-200-1200-E1A1
10-54Vdc
58Vdc
1W~15W 1.5~25W 2W~36W
100-700mA 150-900mA 200-1200mA
±5%
≤2V
0Vdc
L-N: 1kV
<0.5mA/230Vac
83%
<0.15A <0.2A
84% 87%
<0.3A
≤3600Hz
OUTPUT
Model
INPUT
ENVIRONMENT
PROTECTION
SAFETY
&
EMC
OTHERS
Dimensions
Packing
Weight(G.W.)
167×41×32mm(L×W×H)
168×43×35mm(L×W×H)
165g±10g
Withstand Voltage
Isolation Resistance
Safety Standards
EMC Emission
EMC Immunity
I/P-O/P: 3750Vac
I/P-O/P: 100MΩ/500VDC/25°C/70%RH
EN61000-4-2,3,4,5,6,8,11 EN61547
Over-heat Protection
Short Circuit Protection
Max Output Voltage
Output Power
Leakage Current
Anti Surge
Inrush Current(typ.)
Efficiency(typ.)
Input Current
Frequency
Input Voltage Range
Dimming Interface
Ripple & Noise
Dimming Range
Working Temperature
Working Humidity
Storage Temp., Humidity
Temp. Coefficient
Vibration
Output Current
Output Voltage
Specification
Over Load Protection
Intelligently adjusting or turning off the output current if the PCB temperature≥110°C, , auto recovers
Non-load Protection Shut down the output if no load, auto recovers when load back to normal
Shut down automatically if short circuit occurs, auto recovers
Shut down the output when rated power≥102%, auto recovers
ta: 50°C tc: 90°C
20 ~ 95%RH, non-condensing
-40°C ~ 80°C, 10~95%RH
±0.03%/°C (0-50°C)
10~500Hz, 2G 12min/1cycle, period for 72min. each along X, Y, Z axes
Current Accuracy
PWM Frequency
0~100%, LED start at 0.01% possible
Non-load Output Voltage
0-10V (1-10V/PWM/RX), Push DIM
220-240Vac
50/60Hz
Power Factor PF>0.90/230Vac, at full load PF>0.93/230Vac, at full load PF>0.95/230Vac, at full load
THD ≤20% at 230Vac, at full load
Cold start 2.48A at 230Vac
(twidth=25.1μs measured at 50% Ipeak)
Cold start 2.28A at 230Vac
(twidth=36μs measured at 50% Ipeak)
Cold start 6.32A at 230Vac
(twidth=60.1μs measured at 50% Ipeak)
1www.ltech-led.com
IEEE 1789
Strobe Test Standard
Strobe Level Almost flicker-free / High frequency exemption level
0-10V
Push DIM
<2%
LF Current Ripple
GB19510.1, GB19510.14
EN61347-1, EN61347-2-13, EN62493
EN61347-1, EN61347-2-13, EN62384
AS61347-1, AS61347-2-13
EN61347-1, EN61347-2-13, EN62384
GB/T17743, GB17625.1
EN550515, EN61000-3-2, EN61000-3-3, EN61547
EN550515, EN61000-3-2, EN61000-3-3
CCC
TUV
CE
RCM
ENEC
CCC
RCM
CE
China
Germany
European Union
Australia
Europe
China
Australia
European Union
UKCA
5 in 1 dimming
0-10V
1-10V
PWM
RX
Push DIM
Over-heat
Protection
Short Circuit
Protection
Multiple
Current
Over Load
Protection
PUSH DIM
0-10V
Certificate No. U6 17 07 01119 004
EMC Certificate No. BST1702498520001Y-1EC-1
LVD Certificate No. BST1709992470001Y-1SC-2
ENEC
CE
Certificate No. B 17 06 01119 001
TUV
RCM Equipment registration No: E2017013627 Ref: ESV170365
0.01-100%
Flicker-free
IEEE 1789
Super depth dimming technology
Flicker-free
IEEE 1789
Super depth
dimming
technology
Class 2
BS EN 61347-2-13:2014+A1:2017 BS EN 61347-1:2015+A1:2021
Britain
UKCA BS EN IEC 55015:2019/A11:2020, BS EN 61547:2009, BS EN IEC 61000-3-2:2019, BS EN 61000-3-3:2013/A1:2019
Britain
