Lucent Technologies MDW 9031 Bedienungsanleitung

503-801-165

Comcode 108406844

February 1999

Issue 2

MDW 9031/9031DCP

Wireless Pocket Phone Quick Reference

qrtitle.book Page i Friday, December 18, 1998 9:52 AM

DEFINITY, MERLIN, MERLIN LEGEND and PARTNER are

registered trademarks of Lucent Technologies.

The order number for this book is 503-801-165. To order

additional copies of this book, call 1 800 457-1235 or

317-322-6791.

qrtitle.book Page ii Friday, December 18, 1998 9:52 AM

Contents

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference

503-801-165 Issue 2 February 1999 iii

Quick Reference 1

Handset Controls . . . . . . . . . . . . . . . . . . . . . . 1

Handset Display . . . . . . . . . . . . . . . . . . . . . . . 2

Line Status Indicators . . . . . . . . . . . . . . . . . . . . 3

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . 4

Battery Charger LEDs. . . . . . . . . . . . . . . . . . . . 5

Help!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . 6

Answering a Call. . . . . . . . . . . . . . . . . . . . . . . 6

Preselecting a Line or Button . . . . . . . . . . . . . . . . 7

Accessing Certain Voice Mail Systems

with a DEFINITY System . . . . . . . . . . . . . . . . .7

Changing Settings or Performing Tests in Local Mode . . . 8

qrtitle.book Page iii Friday, December 18, 1998 9:52 AM

qrtitle.book Page iv Friday, December 18, 1998 9:52 AM

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference

503-801-165 Issue 2 February 1999 1

Quick Reference

Handset Controls

234

MSG

212 555 1212

TransTalk

On/Off

Feat/P

Conf

GHI

PQRS

OPER

Trans

Hold

Redial

JKL

ABC

DEF

MNO

TUV

WXYZ

Mute

Feat/P

Exit (9031DCP Only)

(Feature/Program)

On/Off

Press to turn the

handset on.

appears in handset

display. To turn off,

press again. Turn on to

make or answer a call,

and turn off to“hang

up.”

Antenna

Extend fully to

maximize the handset

range and voice

quality.

Receiver

Receives the sound

of your caller's voice,

unless a headset is

connected.

Headset On/Off

Press to turn the headset on

if the headset is plugged in.

appears in handset

display. To turn off, press

again. Turn on to make or

answer a call, and turn off to

“hang up.”

Lanyard Loop

Attach lanyard for

carrying handset.

Volume Control

Press "+" to increase

or "-" to decrease

volume of receiver or

alerter.

Conf (Conference)

Press to conference

in (add) another

party to your call.

Trans (Transfer)

Press to transfer

a call to another

extension.

Handset Display

Displays status of

lines and range. Also

see “Handset

Display” on next page.

Column

Use, with Select

button, to choose a

line or programmable/

intercom/drop button.

Redial

Press to redial

the last number

manually dialed from

the handset.

Mute

Press to turn the micro-

phone off for privacy .

Select

Use to move the

Selection rectangle,

and, with Column

buttons, to choose a

line or programmable/

intercom/drop button.

Also use to wake-up

the phone.

Headset Connector

Plug in the headset cord

to use the headset.

Hold

Press to put a call on

hold.

Scroll

(9031DCP Only)

When the Selection

rectangle is in the top row,

press to toggle between

the first and second line of

the display.

Press the Feat/P twice

to Exit the Softkey

menu.

Press to use dial-code

features (PARTNER

systems only) or to

enter programming

mode.

qrtitle.book Page 1 Friday, December 18, 1998 9:52 AM

Quick Reference

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference 503-801-1652 Issue 2 February 1999

Handset Display

1 Information you would see on a wired system phone’s display, (except

time), based on your communications system:

LCL:P, D, M1, or M2 = Local Mode:

communications system

WIRELESS TEST = Handset in Wireless Test Mode

VIBR = Vibrator enabled

PSEL = Line Preselection enabled

PRESELECTION:ON/OFF = Line Preselection Mode:status

CHANGE BUTTN MAP = Communications system setting is

wrong

MAP:P, D, M1, M2 = Button Mapping Mode: setting

NO LINK = Handset is not communicating with radio module

2 MSG indicates that you have a message.

3 RANGE indicates that the handset is out of range or almost out of range.

Handset also beeps.

4 ON indicates that handset was turned on by pressing O.

5 Battery icon flashes to indicate a low battery condition. Handset also

emits 2 beeps.

6 No Ring icon indicates that the alerter is disabled.

7 MUTE indicates that handset microphone was turned off by pressing

543

qrtitle.book Page 2 Friday, December 18, 1998 9:52 AM

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference

503-801-165

Quick Reference

Issue 2 February 1999 3

8 Line Status Indicators show the status of line or

programmable/intercom/drop buttons. See “Line Status Indicators”

below.

9 Selection rectangle indicates the active row for line or

programmable/intercom/drop button selection.

When the display is blank, the handset is either turned off or in “sleep”

mode. Activate the display by pressing Oor "

Line Status Indicators

Each line status indicator corresponds to a specific outside line or

programmable/intercom/drop button:

PARTNER Systems

A triangle ( ) is the equivalent of a green LED on a wired phone.

A rectangle ( ) is the equivalent of a red LED on a wired phone.

All Other Systems

A triangle ( ) is the equivalent of a red LED on a wired phone.

A rectangle ( ) is the equivalent of a green LED on a wired phone.

qrtitle.book Page 3 Friday, December 18, 1998 9:52 AM

Quick Reference

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference 503-801-1654 Issue 2 February 1999

Volume Adjustment

To increase or decrease the volume of the handset alerter or the receiver

(earpiece):

•Alerter: Press the “+” or the “-” button while the MDW 9031/9031DCP

is awake but turned off. If the display is dark (the phone is in “sleep”

mode), press "

to wake it up, then press the “+” or the “-” button.

•Receiver: Press the “+” or the “-” button while the MDW

9031/9031DCP is turned on.

qrtitle.book Page 4 Friday, December 18, 1998 9:52 AM

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference

503-801-165

Quick Reference

Issue 2 February 1999 5

Battery Charger LEDs

The color of the battery charger’s LEDs indicates the state of the

corresponding battery pack, as shown in the following table:

Battery

charger LED

shows...

If it is the

SPARE LED,

the battery

pack in the

Spare battery

compartment...

If it is the

HANDSET

LED, the

battery pack

in the

Handset...

If it is the

REFRESHLED,

the Refresh

button was

pressed, and

the Handset

battery pack...

Steady orange Is charging Is charging N/A

Steady green Is fully charged Is fully charged N/A

Flashing red

See Note

below.

Has one of the

following

problems...

•Is not seated

properly in the

charger

•Has dirty

contacts

•Is defective

Has one of the

following

problems...

•Is not

seated

properly in

the charger

•Has dirty

contacts

•Is defective

N/A

Steady red Is in the Discharge

portion of the

Refresh cycle.

Is in the

Discharge

portion of the

Refresh cycle.

Is in the

Discharge portion

of the Refresh

cycle.

Note: If either the SPARE LED or the HANDSET LED is flashing

red, both battery packs must be removed from the charger to

clear the flashing-red condition. Address the possible

problems for one battery pack at a time to determine whether

one is bad.

qrtitle.book Page 5 Friday, December 18, 1998 9:52 AM

Quick Reference

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference 503-801-1656 Issue 2 February 1999

Help!

MDW 9031

If you need help when using your MDW 9031 with a PARTNER®,

MERLIN®, or MERLIN LEGEND®system in the continental U.S.,

call 1 800 628-2888.

MDW 9031DCP

If you need help when using your MDW 9031DCP with a DEFINITY®

system in the continental U.S., call 1 800 225-7585, or contact the Lucent

Customer Care Center at 1 800 241-2121.

For all other systems, follow the procedure you normally use to get support

for your communications system. Outside the continental U.S., contact your

Lucent Technologies Representative or local Authorized Dealer.

Making a Call

1 Press O.

2 If desired, press "

to move the Selection rectangle; then press '

corresponding to the line you want.

3 Dial the call.

4 To end the call, press O.

Answering a Call

1 Press O.

2 Speak into the handset.

3 To end the call, press O.

qrtitle.book Page 6 Friday, December 18, 1998 9:52 AM

Andere Handbücher für MDW 9031

Inhaltsverzeichnis

Andere Lucent Technologies Schnurloses Telefon Handbücher

Lucent Technologies

Lucent Technologies TransTalk 9000 Bedienungsanleitung

Lucent Technologies

Lucent Technologies DEFINITY 9601 Bedienungsanleitung

Lucent Technologies

Lucent Technologies WT9001 Bedienungsanleitung

Lucent Technologies

Lucent Technologies MDW 9031 Bedienungsanleitung

Lucent Technologies

Lucent Technologies 9125 Bedienungsanleitung

Lucent Technologies

Lucent Technologies TransTalk 9000 Kurzanleitung

Lucent Technologies

Lucent Technologies MDW 9031DCP Kurzanleitung

Lucent Technologies

Lucent Technologies DEFINITY 9601 Bedienungsanleitung

Lucent Technologies

Lucent Technologies 4336 Bedienungsanleitung

Lucent Technologies

Lucent Technologies 9200 Bedienungsanleitung

Lucent Technologies

Lucent Technologies 905 Bedienungsanleitung

Lucent Technologies

Lucent Technologies MDW 9031 Bedienungsanleitung

Lucent Technologies

Lucent Technologies DEFINITY 9601 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Business Cordless 901 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung