Lucent Technologies CellPipe IAD 4A Handbuch

CellPipe™IAD 4A and

CellPipe™ IAD 8T

Hardware Installation Guide

Part Number: 7820-0791-001

For software version 2.0

January 2001

Lucent Technologies

This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or

altered in any fashion by any entity (either internal or external to Lucent Technologies), except in accordance with applicable

agreements, contracts, or licensing, without the express written consent of Lucent Technologies. For permission to reproduce or

distribute, please email your request to [email protected].

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing, but infor-

mation is subject to change.

Safety, Compliance, and Warranty Information

Before handling any Lucent Access Networks hardware product, read the Edge Access Safety and Compliance Guide included in

your product package. See that guide also to determine how products comply with the electromagnetic interference (EMI) and

network compatibility requirements of your country. See the warranty card included in your product package for the limited

warranty that Lucent Technologies provides for its products.

Security Statement

In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access

features.

Copyrights for Third-Party Software Included in Lucent Access Networks Software Products

Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without

fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice

appear in supporting documentation. Neither Hewlett-Packard nor Silicon Graphics makes any representations about the suit-

ability of this software for any purpose. It is provided “as is” without express or implied warranty.

reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the

following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions, and

the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and

the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials

mentioning features or use of this software must display the following acknowledgement: This product includes software devel-

oped by the University of California, Berkeley, and its contributors. 4. Neither the name of the University nor the names of its

contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBU-

TORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Feedback

Lucent Technologies appreciates your comments, either positive or negative, about this manual. Please send them to

[email protected].

Trademarks

CellPipe IAD 4A and CellPipe IAD 8T Hardware Installation Guide iii

Trademarks

4ESS, 5ESS, A Network of Expertise, AnyMedia, APX 8000, AqueView, AUDIX,

B-STDX 8000, B-STDX 9000, ...Beyond Compare, CaseView, Cajun, CajunDocs,

CAJUNVIEW, Callmaster, CallVisor, CBX 500, CellPipe, ChoiceNet, ClearReach,

ComOS, cvMAX, DACScan, Dacsmate, Datakit, DEFINITY, Definity One,

DSLMAX, DSLTerminator, DSLPipe, DSLTNT, Elemedia, Elemedia Enhanced,

EMMI, End to End Solutions, EPAC, eSight, ESS, EVEREST,

Gigabit-scaled campus networking, Globalview, GRF, GX 250, GX 550,

HyperPATH, Inferno, InfernoSpaces, Intragy, IntragyAccess, IntragyCentral, Intuity,

IP Navigator, IPWorX, LineReach, LinkReach, MAX, MAXENT, MAX TNT,

Multiband, Multiband PLUS, Multiband RPM, MultiDSL, MultiVoice, MultiVPN,

Navis, NavisAccess, NavisConnect, NavisCore, NavisRadius, NavisXtend, NetCare,

NetLight, NetPartner, OneVision, Open Systems Innovations, OpenTrunk, P550,

PacketStar, PathStar, Pinnacle, Pipeline, PMVision, PortMaster, SecureConnect,

Selectools, Series56, SmoothConnect, Stinger, SYSTIMAX, True Access, WaveLAN,

WaveMANAGER, WaveMODEM, WebXtend, and

Where Network Solutions Never End are trademarks of Lucent Technologies Inc.

Advantage Pak, Advantage Services, AnyMedia, ...Beyond Compare,

End to End Solutions, Inter.NetWorking, MAXENT, and

NetWork Knowledge Solutions are service marks of Lucent Technologies Inc. Other

trademarks, service marks, and trade names mentioned in this publication belong to

their respective owners.

Ordering Information

You can order the most up-to-date product information and computer-based training

online at http://www.lucent.com/ins/bookstore.

Customer Service

To obtain product and service information, software upgrades, and technical

assistance, visit the eSight™Service Center at http://www.esight.com. The

center is open 24 hours a day, seven days a week.

Customer Service

iv CellPipe IAD 4A and CellPipe IAD 8T Hardware Installation Guide

Finding information and software

The eSight Service Center at http://www.esight.com provides technical

information, product information, and descriptions of available services. Log in and

select a service. The eSight Service Center also provides software upgrades, release

notes, and addenda. Or you can visit the FTP site at ftp://ftp.ascend.com for

this information.

Obtaining technical assistance

The eSight™Service Center at http://www.esight.com provides access to

technical support. You can obtain technical assistance through email or the Internet,

or by telephone.

If you need to contact Lucent Technologies for assistance, make sure that you have

the following information available:

•Active contract number, product name, model, and serial number

•Software version

•Software and hardware options

•If supplied by your carrier, service profile identifiers (SPIDs) associated with

your line

•Your local telephone company’s switch type and operating mode, such as AT&T

5ESS Custom or Northern Telecom National ISDN-1

•Whether you are routing or bridging with your Lucent product

•Type of computer you are using

•Description of the problem

Obtaining assistance through email or the Internet

If your services agreement allows, you can communicate directly with a technical

engineer through Email Technical Support or eSight Live chat. Select one of these

sites when you log in to http://www.esight.com.

Calling the technical assistance center (TAC)

If you cannot find an answer through the tools and information on eSight or if you

have a very urgent need, contact TAC. Access the eSight Service Center at

Important safety instructions

CellPipe IAD 4A and CellPipe IAD 8T Hardware Installation Guide v

http://www.esight.com and click Contact Us below the Lucent

Technologies logo for a list of telephone numbers inside and outside the United

States.

You can alternatively call (800) 272-3634 for a menu of Lucent services, or call

(510) 769-6001 for an operator. If you do not have an active services agreement or

contract, you will be charged for time and materials.

Important safety instructions

1Read and follow all warning notices and instructions marked on the product or

included in the manual.

2There are no operator serviceable parts within the unit. Refer all servicing to

trained service personnel.

3Product installation should be performed by trained service personnel only.

4Install only in restricted-access areas in accordance with UL1950, C22.2 No. 950,

and IEC60950

5The maximum recommended operating ambient is 122°F (50°C). Allow

sufficient air circulation or space between units when installed in a closed or

multiple-rack assembly.

6Slots and openings in the cabinet are provided for ventilation. To ensure reliable

operation of the product and to protect it from overheating, these slots and

openings must not be blocked or covered. Installation without sufficient airflow

can be unsafe.

7Equipment mounted in a rack should be distributed to prevent a possible

hazardous condition due to uneven loading. The rack should safely support the

combined weight of all equipment. This product weighs 8 lbs.

8The power source has to be adequately rated to assure safe operation of the

equipment. The building installation and/or power source must provide overload

protection.

9Protective earth (PE) connection is essential to ensure safe operation before

connecting to the power supply and telecommunication network. Do not defeat

the purpose of the grounding-type plug by modifying the plug or using an

adapter. Use an outlet tester or a voltmeter to check the ac receptacle for the

presence of earth ground. If the receptacle is not properly grounded, the

Important safety instructions

vi CellPipe IAD 4A and CellPipe IAD 8T Hardware Installation Guide

installation must not proceed until a qualified electrician has corrected the

problem.

If the power supply is fed from a power source with no protective-earthing path

(such as in certain Nordic countries), connect an earth-grounded copper wire to

the dedicated wiring terminal marked with (PE symbol) on the chassis. The

minimum size of the wire for a Pipeline unit with rated input current not

exceeding 6A is AWG 18 and cross-sectional area 0.75 mm2.

Models with ac power inputs are intended for use with a single-phase three-wire

power cord (which includes earthing conductor).

For models with dc power inputs, the protective earth connection must be

established by using the dedicated earthing terminal marked with the PE symbol

or, if provided, the earthing pin of the input terminal block.

10 Models with dc power inputs must be connected to a -48V dc supply source that

is electrically isolated from the ac source in accordance with UL1950, C22.2 No.

950, and IEC60950.

11 For products installed in Nordic countries (except Central Office equipment), a

type B plug or permanent connection must be used for connections to the main

power supply.

12 Before installing wires to the dc power terminal block, verify that these wires are

not connected to any power source. Installing live wires (that is, wires connected

to a power source) is hazardous.

13 Do not allow anything to rest on the power cord, and do not locate the product

where people will walk on the power cord.

14 Do not attempt to service this product yourself. Opening or removing covers can

expose you to dangerous high voltage points or other risks. Refer all servicing to

qualified service personnel.

15 General purpose cables are provided with this product. Special cables, which

might be required by the regulatory inspection authority for the installation site,

are the responsibility of the customer.

16 When installed in the final configuration, the product must comply with the

applicable safety standards and regulatory requirements of the country in which

it is installed. If necessary, consult with the appropriate regulatory agencies and

inspection authorities to ensure compliance.

17 A rare phenomenon can create a voltage potential between the earth grounds of

two or more buildings. If products installed in separate buildings are

interconnected, the voltage potential might cause a hazardous condition. Consult

Important safety instructions

CellPipe IAD 4A and CellPipe IAD 8T Hardware Installation Guide vii

a qualified electrical consultant to determine whether or not this phenomenon

exists.

In addition, if the equipment is to be used with telecommunications circuits, take the

following precautions:

•Never install telephone wiring during a lightning storm.

•Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

•Never touch uninsulated telephone wires or terminals unless the telephone line

has been disconnected at the network interface.

•Use caution when installing or modifying telephone lines.

•Avoid using equipment connected to telephone lines (other than a cordless

telephone) during an electrical storm. There is a remote risk of electric shock

from lightning.

•Do not use a telephone or other equipment connected to telephone lines to report

a gas leak in the vicinity of the leak.

!Warning: To reduce the risk of fire, communication cable conductors must be

26 AWG (0.13 mm2) or larger.

!Avertissement: Afin de réduire les risques d'incendie, les fils conducteurs du

câble de communication doivent être d'un calibre minimum de 26 AWG

(American Wire Gauge), c'est-à-dire d'un minimum de 0,13 mm².

!Warnung: Um Feuer-Risiko zu reduzieren, müsssen die Querschnitte der

Kommunikationskabel-Leiter 0,13 mm²oder größer sein.

CellPipe IAD 4A and CellPipe IAD 8T Hardware Installation Guide ix

Contents

Trademarks .............................................................................................................. iii

Ordering Information ............................................................................................... iii

Customer Service ..................................................................................................... iii

Important safety instructions ..................................................................................... v

Introduction ............................................................................. 1

New CellPipe products .............................................................................................. 1

Lucent TURN-UP ...................................................................................................... 2

Serial connection ....................................................................................................... 2

Configuring your communications software ............................................................. 2

Preparing to upgrade .................................................................................................. 3

Locating the software binary file(s) ......................................................................... 3

Power supply ............................................................................................................. 4

CellPipe IAD 4A ....................................................................... 5

Connecting a CellPipe IAD 4A unit .......................................................................... 5

Checking the activity of CellPipe IAD 4A status lights ............................................ 6

Configuring a CellPipe IAD 4A unit ......................................................................... 8

CellPipe IAD 8T ....................................................................... 9

Connecting a CellPipe IAD 8T unit .......................................................................... 9

Checking the activity of CellPipe IAD 8T status lights .......................................... 10

Configuring a CellPipe IAD 8T unit ....................................................................... 12

Connector Pinouts ................................................................ 15

TERMINAL pinouts ................................................................................................ 15

Contents

x CellPipe IAD 4A and CellPipe IAD 8T Hardware Installation Guide

10/100 LAN connector pinouts ............................................................................... 15

T1 Connector pinouts .............................................................................................. 16

ADSL connector pinouts ......................................................................................... 16

FCC Regulations .................................................................. 17

FCC Part 15 Notice .................................................................................................. 17

IC CS-03 Notice ...................................................................................................... 18

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lucent Technologies Modem Handbücher

Lucent Technologies

Lucent Technologies CellPipe 20A-USB Bedienungsanleitung

Lucent Technologies

Lucent Technologies 7820-0657-001 Bedienungsanleitung

Lucent Technologies

Lucent Technologies CellPipe 20A-USB Bedienungsanleitung

Lucent Technologies

Lucent Technologies Host-Based Controller Modem AT Montage- und Bedienungsanleitung

Lucent Technologies

Lucent Technologies H08-15328 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung