2
labeled with a feature name. Each has a red light telling you that this is the line you are using or this is
the line you will get when you lift your handset. The green status light next to each call appearance
and feature button tells you that the line or feature is being used.
Conf/Ring Button
For setting up conference calls. (Use this feature while off-hook.) Ring is printed below <Conf> to
remind you that by pressing <Conf> while on-hook, you can select a personalized ringing pattern for
your telephone. You can choose from among eight possible ringing patterns.
Dial Pad
The standard 12-button pad for dialing phone numbers and accessing features. The letters "Q" and
"Z" have been added to the appropriate dial pad keys for directory access, and the "5" button on your
dial pad has raised bars for visually impaired users.
Display
A built-in 2-line by 24-character display.
Display Control Buttons
The softkeys are the four keys labeled with arrows located directly below the display. The four display
control buttons, labeled Menu, Exit, Prev, and Next are located under the softkeys.
Handset
A handset is provided for placing and answering calls. In most cases, you must lift the handset (go
off-hook) before you can use a feature.
Headsets
Headsets for your telephone allow one-touch hands-free operation. To answer a call, press
<Headset> (if administered on your telephone). Press the button again to disconnect. (The Headset
feature must be administered for your telephone.) Headsets consist of a headpiece and modular base
unit. The base unit plugs into the Handset jack.
Hold
A red button for putting a call on hold.
Message Light
A red light that goes on when a message has been left for you. This light is labeled with a picture of an
envelope.
Mute Button
For turning off the microphone associated with the handset or the speaker, whichever is active, so the
other person on the call cannot hear you.
Redial Button
