Lucky Star P4VMD+ Bedienungsanleitung

P4VMD+

(VIA P4M266 VGA-ON-CHIP Chipset)

With DDR-200/266 & PC-100/133 Memory

For Pentium®4 400MHz FSB PC System

Main Board

使用者手冊

(Ver.:1.0)

親愛的使用者，謝謝您使用本公司出品之主機板。首先聲明本

手冊擁有著作權，請勿盜印或非法使用。此使用者手冊版權屬

於本公司所有，未經本公司許可不得任意複製拷貝或翻譯成其

他型式或語言or translated into any natural or computer language,

in any form or by any means without prior written permission. This

manual and the information contained here are protected by

Revision History

Revision Date Release Notes

1.0 Feb.-2002 First Official Release

Warning and disclaimer

This manual is designed to provide information about the Pentium®4

main-board. Effort have been made to make this manual as accurate

as possible, but no warranty or fitness is implied. All the information

is provided on an 'as is' basis. The author and his corresponding

publishing company shall have neither liability nor responsibility to

any person or entity with respect to any loss or damages arising

from the information contained in this manual or from the use of the

system board that accompanies it.

Information contained in this manual is subject to change without

notice. The manufacturer of the system board will not be held

responsible for technical or editorial omissions made herein, nor for

the incidental or consequential damages resulting from its

furnishing, performance, functionality or use. Subsequent changes to

this manual will be incorporated into the next edition. We welcome

any suggestion regarding this manual or our computer products.

Trademarks

●Intel®and Pentium®are registered trademarks of Intel®Corporation.

●IBM®is a registered trademark of International Business Machines

Corporation.

●Microsoft®is a registered trademark of Microsoft®Corporation.

●PCI®is a registered trademark of PCI®Special Interest Groups.

●AWARD®is a registered trademark of Award Software Inc.

All other trademarks are the property of their respective owners.

Table of Contents

Chapter 1 Introduction…………………………………………1

1-1 Main Specifications……………………………………………………2

1-2 System Configuration……………………………………………..……5

1-3 Notice of Hardware Installation………….……………………....……6

Chapter 2 Installation……………….……………………….…7

2-1 Component Locations …………………..…………………………..…7

2-2 Layout Reference……………………………………………..………..8

2-3 Jump Setting…………………………………………………………9

2-3-1 Memory Selector ………………………………………………………9

2-4 CPU Installation ……………………………………………………10

2-4-1 CPU and System Cooling………………………….…………………13

2-5 Connectors……………………………………………………………14

2-5-1 Front Panel…………………………………………………….………14

2-4-1 Back Panel Connectors………………………………………………16

2-4-2 Power Supply Connector……………………………………………18

2-4-3 Floppy Disk Connector………………………………………………19

2-4-4 IDE1 and IDE2………………………………………………………20

2-4-5 Internal Audio Connecotrs……………………………………………21

2-4-6 IR1: IrDA Connector…………………………………………………22

2-5 Memory………………………………………………………………23

2-5-1 Memory Installation…………………………………………………24

Chapter 3 Software Installation………………………………25

3-1 Notice of Driver Installation…………………………………………25

3-2 How to Install Software Drivers…………………………………….26

Chapter 4 The BIOS…..………………………………………28

4-1 Updating the BIOS……………………………………………………29

4-2 The CMOS Memory…………………………………………………30

4-3 The BIOS Setup Pages………………………………………………32

4-3-1 Standard CMOS Setup………………………………………………35

4-3-2 BIOS Features Setup…………………………………………………39

4-3-3 Chipset Features Setup………………………………………..……43

4-3-4 Integrated Peripherals………………………………………..……...49

4-3-5 Power Management Setup………………………………………….55

4-3-6 PNP/PCI Configuration Setup……………………………………….60

4-3-7 PC Health Status……………………………………………………62

4-3-8 Frequency/Voltage Control.…………………………………………63

4-3-9 Passwords Setting……………………………………………………..65

Chapter 5 Appendix………………………………….………67

5-1 Memory Map………………………………………………….………67

5-2 I/O Map………………………………...….………………………….68

5-3 Time & DMA Channels Map…………………………………………69

5-4 Interrupt Map………………………………………….……………...70

5-5 RTC & CMOS RAM Map………………………………………….71

5-6 ISA I/O Address Map……………………………………………..72

Chapter 6 Q & A…………………………………………………………………74

Important Warnings:

STOP

WARNING: NEVER run the processor without the heatsink properly and firmly

attached. This will damage the processor within SECONDS. Also do NOT try to use

Pentium Heatsinks, these will NOT fit and do NOT provide adequate cooling.

STOP

WARNING: Make sure your power supply can deliver the power your system needs.

We recommend AT LEAST a 250W power supply. Even better, get a 300W power

supply, especially when using many peripherals.

Chapter 1 Introduction

Thank you for purchasing this high quality motherboard, we are confident that you will be

able to use this motherboard to your full satisfaction. This manual is divided into 6 main

sections, as described below:

Introduction

The introduction contains information on the main specifications for this motherboard, the

package contents and cautionary notes.

Hardware Installation

The Hardware Installation section is the most important in the manual. It describes in detail

how to set the motherboard up for operation. Read all information and follow all steps,

especially if you are a new user.

Software Installation

The software section describes the drivers that need be installed to make your OS operates

properly. The drivers are provided on the driver CD.

BIOS Setup

Information on how to enter the BIOS setup and change settings is given here. In addition

all individual BIOS items are described. Although some BIOS setting information is given

in the hardware installation section where appropriate, refer to the BIOS Setup Section for

details.

Appendix

Provides useful information

Q & A

1-1 Main Specifications

 PCB board size and form factor: 24cm x 24.5cm, M-ATX type.

 PCB layer: 4 layers

 Supported CPUs

Can support the latest 400MHz system bus Socket-478 Intel P4 CPUs up to 2.2GHz or

higher speed. Supports both 0.13µwillamette & 0.18µ morthwood process CPUs.

 Chipset Northbridge (P4M266)

The VIATM VT8751 (VIA P4M266) system controller is a 400MHz System Bus. The

DRAM controller supports DDR200/ DDR266 Double Data Rated (DDR) SDRAM and

PC100/ PC133 Dual Inline Memory Module (DIMM) SDRAM; it complies with AGP 2.0

specifications for 4X, 2X AGP modes and PCI 2.2 bus interface with support for 2 PCI

masters. It was designed especially to deliver enhance Intel®P4 processor system

performance. Meanwhile it is integrated with S3 Savage-8 VGA core Logic on chip.

 Chipset Southbridge (VT8233)

The VT8233 PCI Super-I/O Integrated Peripheral Controller (PSIPC) support Ultra/DMA/

100, which allows burst mode data transfer rates of up to 100MB/ sec; AC97 audio (using

the on-board VIA VT1611A Audio Cadec); USB controller with root hub and four function

ports.

 Memory

This motherboard comes equipped with two Double Data Rate (DDR) Memory Module

sockets to support DDR 200/ 266MHz-compliant (128, 256MB, or 512MB) DDR Modules

up to 2GB or with two Dual Inline Memory Module (DIMM) sockets to support PC-100/

PC-133MHz-compliant (64, 128, 256, or 512MB) DIMM Modules up to 1GB.

You can use either SDRAM memory or DDR memory. Can’t be

installed two kinds of memory module at the same time.

 AGP (Accelerated Graphics Port)

This motherboard comes with an AGP slot with support for AGP cards for high

performance. The AGP 66MHz 4X mode is supported as well, further increasing system

performance.

This mainboard provides AGP slot, meanwhile user can use on-chip VGA

function without setting any jumper.

 PCI Expansion Slots

With two 32-bit PCI (Rev. 2.2) expansion slots, which can support Bus Master PCI cards,

such as LAN or Video-grabber cards (PCI supports up to 133MB/s maximum throughput),

this motherboard is ready for the most demanding applications.

 AMR Slot (Optional)

An Audio Modem Riser (AMR) slot also is supported, a very affordable audio and / or

modem riser card can be used in combination with this slot.

 USB interface

With support for up to 4 USB ver 1.1 ports, two on-board, this motherboard provides ample

USB expansion room.

 IDE interface

This motherboard comes with an onboard PCI Bus Master IDE controller with two

connectors that support four ATA66/ 33 devices on two channels. Supports UDMA/100,

UDMA/66, UDMA/33, PIO Modes 3 & 4 and Bus Master IDE DMA Mode 2, and

Enhanced IDE devices, such as CD-R/ RW, DVD-ROM, CD-ROM, Tape Backup and LS-

120 drives. An IDE-3/4 RAID function is optional.

 Super Multi-I/O

This functionality is integrated into the southbridge of the chipset. It provides two high-

speed UART compatible serial ports and one parallel port with EPP and ECP capabilities.

 Infrared (IrDA) Connector

This functionality is also integrated into the southbridge of the chipset. The IrDA connector

supports an optional IR remote control device for wireless interfacing with external

peripherals, personal gadgets, or an optional remote controller.

 System BIOS

This motherboard comes with a 2MB BIOS that provides CPU/ SDRAM frequency, boot

block write protection, and HD/ SCSI/ CD/ Floppy boot selection. DMI is also supported

through BIOS, which allows hardware to communicate within a standard protocol creating

a higher level of compatibility.

 LAN function

This mainboard has optional 10/100M LAN function provided by southbridge VIA 8233

chipset & VIA VT6103 PHY chipset.

 Special Function

A. Over 300W P4 type power supply is needed, meanwhile over 250W PIII type

power supply is acceptable but not guaranteed for proper function.

B. AC-97 Sound Codec chip provides “ amplifier“ function.

1-2 System Configurations

Below is the VIA P4M266 chipset based system configuration:

VIA

P4M266

Intel Pentium 4 processor

System Bus

3.2GB/s

2.1GB/sec

or 1.06GB/sec

8-Bit Hub

Interface

26MB/s

AGP4X (1.5V)

1.06GB/s

DDR266

AGP Slot or

3D Graphics

Controller

AC-97 Modem CODEC

(optional)

2 ATA100 IDE Channels

4 USB 1.1 Ports

PCI Bus

SIO Flash

BIOS

PC-100/133

VIA

VT 8233

PC-100/133

DDR266

Inhaltsverzeichnis

Andere Lucky Star Hauptplatine Handbücher

Lucky Star

Lucky Star 6B810E Bedienungsanleitung

Lucky Star

Lucky Star 6VPM1 Bedienungsanleitung

Lucky Star

Lucky Star K7VAT Bedienungsanleitung

Lucky Star

Lucky Star 6B810E Bedienungsanleitung

Lucky Star

Lucky Star P4SAD Bedienungsanleitung

Lucky Star

Lucky Star P4A845S Bedienungsanleitung

Lucky Star

Lucky Star K7VAT Bedienungsanleitung

Lucky Star

Lucky Star 6VA694 Bedienungsanleitung

Lucky Star

Lucky Star 6M810 Bedienungsanleitung

Lucky Star

Lucky Star 5MVP3 Bedienungsanleitung

Lucky Star

Lucky Star 6VA693T Bedienungsanleitung

Lucky Star

Lucky Star 5V-1B Bedienungsanleitung

Lucky Star

Lucky Star 5MVP4 Bedienungsanleitung

Lucky Star

Lucky Star 6VA693AM Bedienungsanleitung

Lucky Star

Lucky Star KTAPRO Bedienungsanleitung

Lucky Star

Lucky Star 6VA693A Bedienungsanleitung

Lucky Star

Lucky Star 6P2BX2 Bedienungsanleitung

Lucky Star

Lucky Star 6P2LX Bedienungsanleitung

Lucky Star

Lucky Star P4A845S Bedienungsanleitung

Lucky Star

Lucky Star K7VA133 Bedienungsanleitung

Lucky Star

Lucky Star 6MZX1 Bedienungsanleitung

Lucky Star

Lucky Star 6ABX3 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung