Lumens VC-A71P Bedienungsanleitung

VC-A71P/VC-A71PN

4K PTZ Video Camera

To download the latest version of Quick Start Guide,

multilingual user manual, software, or driver, etc.,

please visit Lumens

https://www.MyLumens.com/support

User Manual - English

 1 
Table of Contents 
 
Copyright Information ...........................................................................................................2 
Chapter 1Safety Instructions................................................................................................3 
Chapter 2Package Contents.................................................................................................4 
Chapter 3Function Introduction...........................................................................................5 
3.1 I/O functions Introduction..................................................................................5 
3.2 Description of LED indicator................................................................................7 
3.3Tally Lamp Function Description.........................................................................7 
Chapter 4Instruction for installation....................................................................................8 
4.1 Camera dimension:...............................................................................................8 
4.2 Preparation before installation ............................................................................9 
4.3 Instruction for installation....................................................................................9 
4.4 Connecting devices............................................................................................14 
Chapter 5Remote Control and Setting Menu ....................................................................17 
5.1 Functions of remote control ..............................................................................17 
5.2 Setting Menu .......................................................................................................18 
Chapter 6Network Function Settings Description............................................................27 
6.1 Connecting Camera to Network.........................................................................27 
6.2 Web Page Function Description........................................................................30 
Chapter 7DIP Switch Setting ..............................................................................................45 
7.1 DIP SWITCH.........................................................................................................45 
Chapter 8Troubleshooting..................................................................................................46 
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information...........47 
 

Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc.

Copying, reproducing or transmitting this file is not allowed if a license is not provided by

Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after

purchasing this product.

In order to keep improving the product, Lumens Digital Optics Inc. hereby reserves the right to

make changes to product specifications without prior notice. The information in this file is

subject to change without prior notice.

To fully explain or describe how this product should be used, this manual may refer to names

of other products or companies without any intention of infringement.

Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any possible

technological, editorial errors or omissions, nor responsible for any incidental or related

damages arising from providing this file, using, or operating this product.

Chapter 1Safety Instructions

Always follow these safety instructions when using the product:

1 Operation

1.1 Please use the product in the recommended operating environment, away from water or source of heat.

1.2 Do not place the product in tilted position or unstable trolley, stand or table.

1.3 Please clean the dust on the power plug prior to usage. Do not insert the product’s power plug into a multiplug to

prevent sparks or a fire.

1.4 Do not block the slots and openings in the case of the product. They provide ventilation and prevent the product

from overheating.

1.5 Do not open or remove covers, otherwise it may expose you to dangerous voltages and other hazards. Refer all

servicing to licensed service personnel.

1.6 Unplug the product from the wall outlet and refer servicing to licensed service personnel when the following

situations happen:

If the power cords are damaged or frayed.

If liquid is spilled into the product or the product has been exposed to rain or water.

2 Installation

2.1 For security considerations, please make sure the standard hanging rack you bought is in line with ULor CE safety

approbations and installed by technician personnel approved by agents.

3 Storage

3.1 Do not place the product where the cord can be stepped on as this may result in fraying or damage to the lead or

the plug.

3.2 Unplug the product during thunderstorms or if it is not going to be used for an extended period.

3.3 Do not place the product or accessories on top of vibrating equipment or heated objects.

4 Cleaning

4.1 Disconnect all the cables prior to cleaning and wipe the surface with a dry cloth. Do not use alcohol or volatile

solvents for cleaning.

5 Batteries (for products or accessories with batteries)

5.1 When replacing batteries, please only use similar or the same type of batteries.

5.2 When disposing of batteries or products, please adhere to the relevant instructions in your country or region for

disposing of batteries or products.

Precautions

This symbol indicates that this

equipment may contain dangerous

voltage which could cause electric

shock. Do not remove the cover

(or back). No user-serviceable

parts inside. Refer servicing to

licensed service personnel.

This symbol indicates that there

are important operating and

maintenance instructions in this

User Manual with this unit.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment.

Notice :

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority

to operate the equipment.

IC Warning

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the

interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of Industry Canada.

Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de ClasseA

prescrites dans la norme sur le material brouilleur: "Appareils Numeriques," NMB-003 edictee par l'Industrie.

EN55032 CE Warning

Operation of this equipment in a residential environment could cause radio interference.

KC Warning

This equipment is Industrial (Class A) electromagnetic wave suitability equipment and seller or user should take notice of it,

and this equipment is to be used in the places except for home.

Chapter 2Package Contents

VC-A71P/VC-A71PN

Instruction for

installation

Remote Control

Power Cord

Power Adapter

RS-422 Connector

Appearance may vary

depending on

country/region

Metal Plate A

Metal Plate B

M3 Screws

Silver x8 / Black x2

Quick Installation Guide

Chapter 3Function Introduction

3.1 I/O functions Introduction

3.1.1 Front View

NO.

Item

Function Descriptions

Tally indicator light

Display the tally light status of the camera

Camera lens

30x HD camera lens

Power LED

indicator

Display the status of the camera, please refer to 3.2 Description of

LED indicator

Standby LED

indicator

Display the status of the camera, please refer to 3.2 Description of

LED indicator

3.1.2 Back View

<Remark> The figure is an example of VC-A71P. VC-A71PN does not support SDI

output and USB.

NO.

Item

Function Descriptions

RS-232 output

RS-232 output port, at most 7 cameras can be connected in a

serial connection

RS-232 input

RS-232 input port, at most 7 cameras can be connected in a serial

connection

HDMI 2.0 output

HDMI 2.0 output (Audio output supported)

RS-422 port

RS-422 connecting port, at most 7 cameras can be connected in a

serial connection

OUTPUT SWITCH

Adjust the resolution setting. The default is 3840 x 2160/59.94p

10.

Audio input

Support Line In/Mic In

11.

Network port

Network port, supporting routers or hubs with power supply

VC-A71P : PoE++ (IEEE802.3bt)

VC-A71PN : PoE+ (IEEE802.3at)

12.

DC 12 V power

connector

AC power supply connecting port

13.

IR SELECT

The remote control ID setting is only controlled after corresponding

to the Camera Select on the remote control

14.

Kensington lock

hole

Safety lock slot

15.

USB 3.0 port

A reserved hole. The current firmware does not support this

function. Please refer to the firmware update information on the

webpage for the official release schedule.

<Remark> Support up to 3840 x 2160/29.97p

<Remark> VC-A71PN does not support this output port.

16.

12G-SDI output

12G-SDI output (Audio output supported)

<Remark> VC-A71PN does not support this output port.

3.1.3 Bottom

NO.

Item

Function Descriptions

17.

Mute cooling fan

The cooling fan automatically controls its rotation speed and performs

cooling in cope with the operation temperature of the machine

<Remark>The cooling fan is not available on VC-A71PN.

18.

Tripod deck lock

hole

The camera is mounted on a (specification) 1/4”- 20 UNC tripod

19.

Rotatable foot

pad

When using the metal plates of accessories, remove 4 pieces of

rotatable food pads on the bottom by rotating counterclockwise, and

then install the mental plates

3.2 Description of LED indicator

Status

Power

Standby

Startup in progress

(initialization)

Green light

Orange light

In use

Green light

No indicator

In standby mode

No indicator

Orange light

3.3 Tally Lamp Function Description

3.3.1 Tally Lamp function may be enabled through the control of RS-232 command. The

setting method is as follows:

Tally Mode: 8x 01 7E 01 0A 01 0p FF

p = 0: OFF

p = 4: Red light (half-brightness)

p = 5: Red light (full-brightness)

p = 6: Green light (full-brightness)

p = 7: Orange light (full-brightness)

Chapter 4Instruction for installation

4.1 Camera dimension:

4.1.1.1 Camera front view and side view

Lengthx width x height: 232 x 188 x 189 mm

Weight: 3.0Kg (excluding the metal plate)

4.1.1.2 Camera base

The camera base has tripod mount lock holes and can be installed on the tripod

deckof a standard specification 1/4”-20 UNC.

189

4.2 Preparation before installation

Installation and connection of the HD camera requires special skills. To install by yourself,

please follow necessary steps, ensure steady and tight installation of the device, and pay

attention to your safety to avoid any accident.

4.2.1 Ensure the safety of the installation environment. Please do not install the device on

unstable ceiling or in a place where the device is in danger of falling to avoid any accident.

4.2.2 Please check whether accessories in the box are complete or not. Please contact the

supplier for any shortage, and make sure to keep the accessories in the box intact.

4.2.3 Please choose a proper place for installation of camera in advance. Please determine

an installation place according to the following requirements

4.1.1.1 Confirm the position for the object to be captured.

4.1.1.2 Confirm whether the camera is set at a proper distance from other light sources.

4.3 Instruction for installation

4.3.1 I would like to install camera on the desk

4.3.1.1 Precautions for installation

Please install the machine on a flat desk

Do not grab the camera head by hand when handling the device

Do not rotate the camera head by hand. Improper rotation may result in breakdown

of the camera

4.3.1.2 Installation steps

1. Place the camera on a flat desk directly to ensure the normal vertical and

horizontal operation of the machine

4.3.2 I would like to install the camera on the ceiling

4.3.2.1 Prepare for the parts and equipment required during the installation

1. Accessories in the box (metal plates A, B, M3 screw silver x 8, black x 2)

2. Screw for locking on ceiling mounted hanger x 4

3. Drilling machine, screw driver, ladder

Andere Handbücher für VC-A71P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lumens Camcorder Handbücher

Lumens

Lumens VC Series Bedienungsanleitung

Lumens

Lumens VCAM105 Bedienungsanleitung

Lumens

Lumens VC-R30 Bedienungsanleitung

Lumens

Lumens VC-A71P Bedienungsanleitung

Lumens

Lumens VC-B30UB Bedienungsanleitung

Lumens

Lumens VC-A61P Bedienungsanleitung

Lumens

Lumens NDI VC-A50PN Bedienungsanleitung

Lumens

Lumens VC-BC701P Bedienungsanleitung

Lumens

Lumens VC-B11U Bedienungsanleitung

Lumens

Lumens VC-A50PB Bedienungsanleitung

Lumens

Lumens VC-BC601P Bedienungsanleitung

Lumens

Lumens VC-B20UA Bedienungsanleitung

Lumens

Lumens VC-BC301P Bedienungsanleitung

Beliebte Camcorder Handbücher anderer Marken

Toshiba

Toshiba CAMILEO Z100 Bedienungsanleitung

Panasonic

Panasonic NV-VS40B Bedienungsanleitung

Canon

Canon RC 260 Bedienungsanleitung

Sony

Sony Handycam DCR-DVD7E Bedienungsanleitung

Brinno

Brinno TimeLapse TLC200 Bedienungsanleitung

JVC

JVC GR-SXM68AC Kurzanleitung

Panasonic

Panasonic AG-HMC152EN Bedienungsanleitung

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung

MYDLINK

MYDLINK DCS-6100LH Bedienungsanleitung

Sony

Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung

SECURECOM

SECURECOM V-5014B Bedienungsanleitung

Panasonic

Panasonic HDC-SD100 Bedienungsanleitung

Sharper Image

Sharper Image U-VIDEO Bedienungsanleitung

JVC

JVC AA-V15EG Bedienungsanleitung

Canon

Canon LEGRIA HV40 Bedienungsanleitung

Sony

Sony Handycam DCR-VX2000 Bedienungsanleitung

RCA

RCA CC616 Bedienungsanleitung

Panasonic

Panasonic NVM40 Bedienungsanleitung