Lumens VC-BR70H Kurzanleitung

VC-BR70H Firmware(FW) Upgrade 1

VC-BR70H Firmware(FW) Upgrade

Please contact Lumens FAE Department through e-mail to get the proper FW and AP before

upgrading.

1. Device and Tool Preparation

1.1 Please prepare following devices and tools before FW upgrade.

VC Model

PC with a RS232 port or Laptop

RS232 cable

RS232-USB cable

(if connect with a laptop)

(9Pin D-Sub Female to 8Pin Mini Din Male)

Monitor

Power adapter and power cord

VC-BR70H Firmware(FW) Upgrade 2

2. Connections for FW upgrade

**Note: OS Support: Windows Vista, Windows XP, Windows 7, Windows 8

The VC FW cannot be upgraded through MAC OS.

2.1 Connect the VC camera(RS232 In) with a PC

2.2 Connect the VC camera(RS232 In) with a laptop

Need 2 cables: RS232 cable and RS232-USB cable

3. FW Upgrade AP

3.1 Please contact Lumens FAE Department through e-mail to get the AP before

upgrading.

Download Tool AP

FW Version

VC Download Tool

VFAxxx

VC DSP FW download

Motor_Pan_VFBxxx

Motor_TIlt_ VFBxxx

4. Download Mode

4.1 Different FW has different download modes.

For the detailed information and the download procedure, please check related

chapters below.

RS232 线材

RS232-USB 线材

RS232 cable

VC-BR70H Firmware(FW) Upgrade 3

5. VC-BR70H FW Type

Please refer to following chapter for W upgrade.

5.1 MCU FW

5.2 PAN/TILT Motor Control FW

5.2.1 PAN and TILT have different FW which need to be upgraded separately.

PAN: Motor_Pan_VFBxxx

TILT: Motor_TIlt_VFBxxx

6. Other Settings

6.1 “System DIP Switch” on the bottom, DIP 1 set at OFF which is for RS232 control.

6.2 “Camera Address Selector” set at 0position

VC-BR70H Firmware(FW) Upgrade 4

7. Control FW

7.1 Please refer to 4.2 Connections for FW upgrade

7.2 Please check the Service DIP Switch at the default position (all off), and then plug

in the power cord.

7.3 Launch the [VC Download Tool].

VC-BR70H Firmware(FW) Upgrade 5

7.4 Browse and select proper FW file.

-Uncheck the box in the front of “DSP *.bin File” and “CM *.bin File”

-Check the box in the front of “Motor *.bin File”

-Click [Browse] and select the FW file

7.5 Select proper [Com Port] and set the [Baud Rate] as [9600], and then press

[DownLoad AP] to start.

VC-BR70H Firmware(FW) Upgrade 6

7.6 FW start updating. (around 1 min taken)

The Percentage will be increased when it’s running.

7.7 FW upgrade finished.

The button will reverse from grey to black and the camera do the self-check

automatically.

7.8 When firmware upgrade finished, please unplug and reconnect the power cord to

restart the camera.

7.9 Go to the menu, [System]-->[Factory Reset] to reset the camera.

7.10 Go 9. Check the FW version on OSD to confirm if the FW version is correct.

VC-BR70H Firmware(FW) Upgrade 7

8. PAN/Tilt Motor Control FW

8.1 Please refer to 4.2 Connections for FW upgrade

8.2 Please return the DIP switch to the default position (all off), and then plug in the

power cord.

8.3 After connecting, set the DIP Switch 1,2,4 ON for the PAN motor.

**Note:

-PAN and TILT have different FW and download mode.

-Please upgrade PAN motor first. When FW upgrade for PAN finished, please change

the DIP switch and then upgrade the TILT motor.

8.4 Launch the AP [VC DSP FW download]

• A: Select the [Comport] and set the [Baud Rate] to [9600]

• B: Press [Disconnect] for connection.

The button will turn to green [Connect] when it is connected.

( PAN Motor Control Download Setting)

VC-BR70H Firmware(FW) Upgrade 8

8.5 When the [Connect] button turned to green, the [Pan Tilt] button will be enabled.

8.6 Please press the [Pan Tilt] button for Pan/Tilt Motor Driver FW Update.

8.7 Browse the FW for Pan and Tilt Motor.

PAN and TILT have different FW which need to be upgraded separately.

- PAN: Motor_Pan_VFBxxx

- TILT: Motor_TIlt_VFBxxx

VC-BR70H Firmware(FW) Upgrade 9

8.8 Update the FW for Pan Motor first. Please click the [Update] button.

8.9 FW upgrading.(around 1mins taken)

8.10 FW upgrade for Pan Motor is finished.

The status button: Gray(Processing)/ Red(Failed)/ Green(Success)

VC-BR70H Firmware(FW) Upgrade 10

8.11 Please change the DIP Switch for TILT motor with DIP 2,4 On

8.12 Please click the [Update] button of Tilt FW.

8.13 FW upgrading. (around 1mins taken)

(TILT Motor Control Download Setting)

Inhaltsverzeichnis

Andere Lumens Digitalkamera Handbücher

Lumens

Lumens DC-F20 Bedienungsanleitung

Lumens

Lumens VC-A71SN Bedienungsanleitung

Lumens

Lumens VCB20DU Bedienungsanleitung

Lumens

Lumens DC172 Kurzanleitung

Lumens

Lumens VC-B30U Kurzanleitung

Lumens

Lumens VC-A50P Bedienungsanleitung

Lumens

Lumens DC160 Bedienungsanleitung

Lumens

Lumens VC-A51S Kurzanleitung

Lumens

Lumens VC-TA50 Bedienungsanleitung

Lumens

Lumens VC-A61P Bedienungsanleitung

Lumens

Lumens VC-B11U Bedienungsanleitung

Lumens

Lumens VC-TR1 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung