23
A. Poco can be connected to a chart plotter (MFD) and/or
a mobile device.
B. For an MFD connect the network cable to a compatible
display. For a list of compatible displays visit:
http://lumiteclighting.com/poco-quick-start
C. For mobile devices connect using the Lumitec Poco App
available on Apple or Google Play stores. You will be
prompted to connect to Poco on launching the app.
Helpful Details:
- Poco default SSID number on back of device.
- DefaultPococongurationaccesspasscode:0000
- Default Wi-Fi and Bluetooth password on back of device
- Wi-Fi web access to user interface: 192.168.4.1
Selectcongurationinthesettingmenu(toprightof
screen). Assign Channel and Clan for each light location
on your boat (underwater lights, spreaders lights etc.).
Examples:
Name: LG_aft_hardtop
Channel: 1
Clan: 1 - Down Lights
Output: Lumitec Spectrum
Name: LG_aft_spreader
Channel: 1
Clan: 2 – Flood Lights
Output: Blue / White
Name: LG_fwd_hardtop
Channel: 2
Clan: 1 - Down Lights
Output: Lumitec Spectrum
Name: LG_underwater
Channel: 3
Clan: 4 – Flood Lights
Output: Lumitec Spectrum
Connect to Poco (Step 1: installation on reverse side) Create Light Groups
QUICK START GUIDE
DIGITAL LIGHTING CONTROL
LUMITEC Logo Reversed :
White Logo - knockout
v-2
654 Check Status IndicatorsAdd Switches to Layout PagesCreate Switches (congurationmenu)
Assign a default intensity and color to each switch.
Example Simple Switch:
Name: Aft Hardtop
Target: LG_aft_hardtop Intensity: 50% Color: Red
You can create lighting scenes by assigning multiple light
groups to more than one target.
Example Scene Switch:
Name: Night Fishing
1. Target: LG_aft_hardtop, Intensity: 20%, Color: Red
2. Target: LG_fwd_hardtop, Intensity: 20%, Color: Red
3. Target: LG_under_gunwale, Intensity: 100%, Color: Green
A. Select a location for your switch.
B. Select the plus (+) button symbol.
C. Select desired switch from list.
Note: Visual order of switches will be arranged by
the order of the switch creation. Switches cannot be
rearranged after they have been added to a screen,
only deleted.
Go to http://lumiteclighting.com/poco-quick-start
for more detailed information.
• POWER Indicator - Illuminates Green if POCO is powered on.
PWR must have supply voltage between 10-30vDC.
• CH1, CH2, CH3 or CH4 Indicator –
• Illuminates Red if power is supplied to channel from fuse/breaker panel.
• Illuminates Green if power is supplied to channel input and channel
is turned on inside of POCO controller; PLI enabled lights may be OFF.
• Flashes Orange if PLI data is transmitted.
• Illuminates Orange if channel is dimmed through a PWM signal.
STATUS Indicator -
• Green blinking light indicates WiFi connection status:
• 0 blinks: WiFi disabled
• 1 blink: WiFi enabled but not connected to any peers
• 2 blinks: WiFi is connected to one or more peers
• Blue blinking light indicates Bluetooth-LE connection status:
• 0 blinks: Bluetooth-LE is disabled
• 1 blink: Bluetooth-LE enabled but not connected
• 2 blinks: Bluetooth-LE is connected
