Lumo LU002RDSP-AL01 Bedienungsanleitung

LU002RDSP-AL01, LU002RDSP-BR01 2W

www.lumo.ae

12V AC/DC or 24V DC

INPUT VOLTAGE

IP67

LED PENNISETUM LIGHT - WITH SPIKE

Switch off the main power before doing any installation or

maintenance process. Insert the coupler in to the PVC spike.

Optional height extending rod can be attached to the light.

Put the PVC spike to the place that you like to have the light

almost 40cm away from the object or tree.

Install the light in the PVC spike.

PART NO. POWER

OFF

Note : This product is out of warranty if :

1-The installation method is not followed as per instruction-sheet

2-Installation material is not used properly

3-Waterproofing is not done as per instruction method

4-Waterproofing connectors are not used

5-The correct voltage is not used

6- If the light is permanently submerged in water

7- If drainage is not provided to drain the rain water

Note : To prevent any risk while doing installation of this product an electrical engineer need to install / supervise installation team.

www.lumo.ae

Connect the light to the main cable which comes from 12V transformer or 24V LED driver. Using

waterproof connectors. (To make a group of lights T-connectors and for single connection I-connector.).

Turn On the power after installation.

LED PENNISETUM LIGHT - WITH SPIKE

T-connector

I-connector

24V LED Driver

Junction Box

LED Driver

12V Transformer

LED

Transformer

LU002RDSP-AL01, LU002RDSP-BR01 2W

www.lumo.ae

12V AC/DC or 24V DC

INPUT VOLTAGE

IP67

LED PENNISETUM LIGHT - WITH BRACKET

Switch off the main power before doing any installation or

maintenance process.

Optional height extending rod can be attached to the light.

Insert the coupler in to the Bracket.

Install the light in the Bracket.

PART NO. POWER

OFF

Note : This product is out of warranty if :

1-The installation method is not followed as per instruction-sheet

2-Installation material is not used properly

3-Waterproofing is not done as per instruction method

4-Waterproofing connectors are not used

5-The correct voltage is not used

6- If the light is permanently submerged in water

7- If drainage is not provided to drain the rain water

Note : To prevent any risk while doing installation of this product an electrical engineer need to install / supervise installation team.

www.lumo.ae

LED PENNISETUM LIGHT - WITH BRACKET

Connect the light to the main cable which comes from 12V transformer or 24V LED driver. Using

waterproof connectors. (To make a group of lights T-connectors and for single connection I-connector.).

Turn On the power after installation.

T-connector

I-connector

24V LED Driver

Junction Box

LED Driver

12V Transformer

LED

Transformer

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lumo Landschaftsbeleuchtung Handbücher

Lumo

Lumo Teho Solar Premium Bedienungsanleitung

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung