Luneau Technology Briot emotion2 Bedienungsanleitung

Instruction Manual

FC 00986 Rev00

Dear Customer,

You have purchased an emotion2 or perception2 edger, and the entire team at Briot, a brand of the

Luneau Technology Group, would like to thank for placing your trust in us.

The emotion2 or perception2 edger is a laboratory machine designed for opticians and is used for

carrying out operations such as creating and selecting jobs, centering and blocking spectacle lenses, and

edging and drilling lenses.

We advise you to read this manual carefully and keep it near the machine in order to be able to refer to it

easily.

The information contained in this manual is not contractually binding and can be modified without prior

notice. This document has been prepared with great care, but some unintentional errors or omissions may

occur, although every effort has been made to avoid them. The manufacturer cannot, in any circumstances,

be held responsible for any possible operating faults that might result from such errors or omissions.

THE MANUFACTURER DOES NOT GUARANTEE THE PERFORMANCE OF YOUR EDGER,IF THE INSTRUCTIONS

CONTAINED IN THIS MANUAL ARE NOT OBSERVED.

Luneau Technology Operations

2, rue Roger Bonnet

27340 PONT DE L'ARCHE

FRANCE



Tel. +33 (0) 232 989 132

Fax: +33 (0) 235 020 294



http://www.briot.com/

[email protected]

DEPENDING ON THE MACHINE VERSION AND OPTIONS AND ON

THE DATE AND COUNTRY OF SALE, SOME EQUIPMENT

ITEM(S)/FUNCTION(S) DESCRIBED IN THIS MANUAL MAY NOT

BE INCLUDED IN YOUR MACHINE.

LTO

GRAPHIC CODES

Different graphic codes have been used in this manual to allow the user to distinguish between different types of

information and easily spot the items which demand special attention (e.g. safety-related items).

The table below lists all the codes and describes them:

TABLE 1: DESCRIPTION OF THE PICTOGRAMS

Graphic

code Description

Vital warning.

Risk of human injury or material damage and machine malfunction.

Follow the instructions carefully.

Vital recommendation.

Risk of machine damage or malfunction.

Follow the instructions carefully.

Vital preliminary action

Before undertaking any action, check that the machine is disconnected.

Electrical hazard.

Heavy component.

In particular, a second person is necessary to carry and move the machine.

Rotating component.

In particular, do not put your hands near the wheel unit.

Attaching component.

In particular, beware of the clamping shafts closing.

Protective gloves must be worn.

Especially for cleaning and changing the tanks.

Protective goggles must be worn.

Especially for cleaning and changing the tanks.

Overalls must be worn.

Especially for cleaning and changing the tanks.

LTO

Waste Electrical and Electronic Equipment (applicable in the

European Union and in European countries using a selective

waste collection system)

This symbol affixed to the product or to its packaging indicates that the product will not be

treated like household waste. Instead, it must be delivered to the designated collection point

where electric and electronic equipment may be recycled. By ensuring that this product is

correctly disposed of, you will help prevent potentially harmful environmental and human

consequences due to improper handling when improperly disposed of. The use of recovered

materials preserves natural resources.

For more information about where you can drop off this product for recycling, please contact

your local waste disposal service or the agent from whom you purchased this product.

\\Table of contents

LTO

INSTALLATION

Unpacking the machine 1.8

Warning

Procedure

Removing the shipping rails 1.10

Conditions

Procedure

Preparing the bench 1.11

Machine dimensions

Space and drilling required

Water connections 1.12

Specifications

General

Filtration tank with pump

Pump

Pipe connections

Locate the connecting points

Procedure

Shipping safeties 1.15

Remove the shipping safeties

Procedure

Electrical connections 1.16

Specifications

Edger wiring

Procedure

Starting the edger 1.17

Procedure

Switching the machine ON/OFF

PRECAUTIONS FOR USE

Safety 2.19

Operator

Machine

Recommendations 2.20

USING YOUR EDGER

Presentation 3.23

Presentation of the machine

Description of the stations

Touch screen

Blocking / centering system

Scanform (emotion2 only)

Shape creator function

Digiform

Drilling

Edger

GRAVITECH™

Presentation of the application screen

Work interface

Visual references

Usual procedure 3.27

Job creation/selection

Calling up a job

Calling up a job saved in the memory

Saving a job/shape in the shape base

Scanform

Gravitech™ optical plotter

Lens tracing

Positioning / Start of capturing

Entering the bridge value

Choosing the frame

Mirror function

Digiform

Presentation

Deforming the shape of a job

Pivoting the shape of a job

Drilling

Positioning of drilling holes

Limits of hole positioning

Limits related to the thickness of the lens

Shape creator function

Presentation

Procedure

Blocking / centering system

Main blocking screen

Marking type for Live blocking

Lens characteristics

Edging

Presentation

Lens materials

Types of lenses

Finishing

Sub-finishing and associated parameters

Safety bevels

Polishing

Special case 3.67

Applying an oversize

Why?

How?

Hints

Important notes

Limits

Edging the left lens with different parameters from

those of the right lens

Principle

Procedure

Checking a finishing before the lens is edged

Principle

Presentation

Visualise a finishing

Place a finishing manually

Produce a manual bevel

Produce a manual groove

Feel the lens again

Points to remember 3.78

CONFIGURATION

Presentation of configuration menus 4.81

Presentation of the configuration menu access screen

Screen description

Access / Exit

Presentation of the personalisation menu access

screen

Screen description

Access / Exit

Adjustment of setting values 4.83

Preliminary remarks

Procedure

Saving the new configuration

Limits

Correction of frame and lens values 4.85

Preliminary remarks

Procedure

Configuration of general operating

parameters 4.87

Presentation

Principle

Screen description

Access / Exit

Configuration of the functions

Selecting the dialog language

Enabling size compensation according to temperature

Enabling size compensation according to wheel condition

\\Table of contents

LTO

Enabling size compensation according to the bowing/

flattening of the frame

Activating the dual JOB function

Configuring the OMA

Saving the new configuration

Configuration of Communication

parameters 4.90

Presentation

Principle

Screen description

Access / Exit

Enabling / Disabling communication functions

MAINTENANCE

Presentation of maintenance menus 5.92

Presentation of the maintenance menu access screen

Screen description

Access / Exit

Presentation of the maintenance screen

Screen description

Access / Exit

Displaying the components 5.94

Task list 5.95

Maintenance of the touch screen zone 5.96

Cleaning the touch screen

Maintenance of the Scanform unit 5.97

Cleaning the Scanform

Replacing a stylus head

Replacing the frame clip tubes

Replacing the centering plate

Maintenance of the centering/blocking

system zone 5.99

Cleaning the bearing surface

Cleaning the lower lens of the collimator

Replacing the main fuse

Regular maintenance of the edger 5.101

Replacing the flexible lens clamp adaptor pad

Preliminary remarks

Procedure

Replacing the mill bit

Preliminary remarks

Procedure

Hints

Replacing the lens feeler tips

Preliminary remarks

Procedure

Hints

Dressing a wheel

Preliminary remarks

Procedure

Hints

Cleaning / replacing the removable visor

Preliminary remarks

Replacing the visor

Hints

Cleaning the filters and water tank

Emptying the water tank

Preliminary remarks

Procedure

Hints

Handling the covers 5.112

Removing the covers

When?

How?

Replacing the covers

Preventive maintenance 5.113

Hints

Replacement table for standard parts

Adjustments 5.114

Presentation of the settings menus access screen

Screen description

Access / Exit

Adjusting the Scanform

Adjusting the feeling

When?

Procedure

Hints

Adjusting the sizes

When?

Procedure

Manual adjustment of axis setting

Procedure

Adjustment of the mineral roughing size

Procedure

Consulting the setting values

Presentation

Access/Exit/Navigation

Presentation of the setting value consultation screens

Adjusting the touch screen

When?

Procedure

Hints

Consulting the statistics 5.131

Presentation of the statistics menu

Screen description

Access/Exit

Consultation principles

Incident log

General operation of the machine

Messages 5.143

Types of messages

List of messages.

TESTS

Presentation of test menus 6.153

Presentation of the test access screen

Screen description

Access / Exit

Typical test screen

Operating principle 6.155

Operating principle of a typical screen

Tests involved

Procedure

Test sequence

Operation of the other screens

Presentation

TECHNICAL SPECIFICATIONS

Characteristics 7.158

Technical specifications 7.159

Characteristics

EC Standards

LTO

REVISION FOLLOW-UP

Revision 00

Page New/Modified Item

1 INSTALLATION

Installation...Unpacking the machine

1-8 LTO

1.1 UNPACKING THE MACHINE

1.1.1 WARNING

 Ensure that the machine is placed in accordance with the TOP and BOTTOM signs on the box.

 Place the machine on a flat and stable surface.

1.1.2 PROCEDURE

Follow the steps below to unpack the machine:

Flow chart 1-1: Unpacking the machine

#1 Place the machine on the floor in its packing with the help of another person.

#2 Cut the two straps on the main packaging carton.

#3 Pull the main packaging carton upwards and remove it.

#4 Cut the adhesive tape on the second carton.

#5 Check that the accessories (case and tubes) have been supplied and 

keep them close to the machine.

#6 Pull the second packaging carton upwards and remove it.

#7 Remove the 4 fixing screws from the rails on the pallet.

#8 Remove the plastic protection from the machine.

#9 With the help of a second person, lift the machine by the rails and place it on

the work bench.

#10 Keep the packaging cartons. We advise you to store them flat.

Installation...Unpacking the machine

1-9 LTO

Illustration 1-1: Unpacking the machine

#1&2 #4

Keep the case and the

tubes near the

machine.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Luneau Technology Kantenschneider Handbücher

Luneau Technology

Luneau Technology Briot Alta Evolution Bedienungsanleitung

Beliebte Kantenschneider Handbücher anderer Marken

Ryobi

Ryobi EXPAND-IT RYEDG12VNM Bedienungsanleitung

VEVOR

VEVOR ASYTM02230 Bedienungsanleitung

CRL

CRL SM5C Bedienungsanleitung

Ryobi

Ryobi RED1220 Bedienungsanleitung

Kunzle & Tasin

Kunzle & Tasin SILVER BACK Handbuch

Scotts

Scotts S20300 Bedienungsanleitung

Husqvarna

Husqvarna LE475 Bedienungsanleitung

Echo

Echo PE-230 Bedienungsanleitung

Mantis

Mantis Edger Bedienungsanleitung

Echo

Echo PE-225 Bedienungsanleitung

MTD

MTD 520 Series Bedienungsanleitung

RedMax

RedMax HEZ2602S Bedienungsanleitung

Craftsman

Craftsman 247.772461 Bedienungsanleitung

Ryobi

Ryobi RED1850Li40 Bedienungsanleitung

Clarke

Clarke Super E Bedienungsanleitung

MTD

MTD 244-595-000 Bedienungsanleitung

Husqvarna

Husqvarna 426EX Bedienungsanleitung

MTD

MTD 24596B Bedienungsanleitung