LUZ NEGRA 41.089 Bedienungsanleitung

Luz Negra reserves the right to modify the technical speciﬁcations of its products.

For up-to-date information, please visit our website www.luznegra.net

1/5rev.1 2023

ecoled by Luz Negra

1. When using the remote, if the indicated lamp is blinking quickly, please change the battery. Please don’t use poor quality batteries to avoid the leaking of battery

liquid which can damage the remote.

2. This 2.4GHz remote is a precise electronic product; don’t use it in humid or dusty areas or in environments with high temperatures or high voltages; Keep indoor

and dry and in an environment free of static electricity.

3. Please don’t use the remote in areas with metallic or strong electromagnetic waves, or it will negatively affect the controlling distance.

4. In the case of failure, please do not attempt to manipulate the product without the help of a fully-trained technician.

Attention

Technical data

Technical characteristics

Remote control for 4 zones

Apt for

Maximum distance of signal

reception

Connection type

Indoor

30m

Common anode

Functions

Regulation

Power supply

Mono colour - CCT - RGB - RGBW -

RGBW+CCT

2xAAA batteries (not included)

Wall bracket No

Ref: 41.089

Features:

• It is capable of controlling 4 different zones.

• 2.4GHz high RF wireless control with long distance controlling.

• Long distance transmission.

• Anti-interference and fast communication speed.

• Compatible with receivers: 41.026 / 41.071 / 40.017

Temperatures and operating conditions

Working temperature -10ºC / 40ºC

Transmission frequency 2.4GHz

Degree of protection

“On”

Zones

“Off”

Control type

Memory

IP20

Yes

Radiofrequency

Yes

Transmitting power

Standby power consumption:

6dBm

5μA

YEARS

3IP20 EMC LVD

Luz Negra reserves the right to modify the technical speciﬁcations of its products.

For up-to-date information, please visit our website www.luznegra.net

2/5rev.1 2023

ecoled by Luz Negra

Compatible with receivers:

41.026 / 41.071

40.017

Length 110.5mm

Width 53mm

Remote control for 4 zones

Height 21mm

Weight 49,9gr

Dimensions and weight

SwitchIndicator light

INPUT

V+RGBCW

V+RGBW

V+R

V+CWCW

OUTPUT

WWWW

V+WWWWW

Made in China

Input Voltage: DC12V~24V

Output: 6A/Channel

Total output Max: 15A

RF: 2.4GHz

Transmitting Power: 6dBm

Control Distance: 30m

Working Temperature: -20~60 ºC

WiFi 5 in 1 LED Strip Controller

Indicating lamp

show output mode

White Light

Yellow Light

Red Light

Green Light

Blue Light

Single Color Mode

Dual White Mode

RGB Mode

RGBW Mode

RGB+CCT Mode

V+RGBCW

V+RGBW

V+RGB

V+CWCW

OUTPUT

WWWW

V+WWWWW

53mm 21mm

110,5mm

Luz Negra reserves the right to modify the technical speciﬁcations of its products.

For up-to-date information, please visit our website www.luznegra.net

3/5rev.1 2023

ecoled by Luz Negra

Remote control for 4 zones

Diagram

Master ON

Master OFF

Brightness +

Brightness -

Cooler white

4 x (un) link light

Zone ON

Warmer white

Zone OFF

• To dim all dual white lights at once or change the colour

temperature, ﬁrst press “Master ON”.

• To do this with individual lights, ﬁrst press “Zone ON”. Secondly,

set the adjustment for colour temperature or brightness.

• To turn on the night light mode of a single (dual white) light, press

and hold the “Zone OFF” from one of the 4 Zones.

• To turn on all the lights in night light mode, press and hold “Master

OFF”.

1. Linking code instructions

2. Unlinking code instructions

Link / Unlink

1. Switch off light then

switch on again after 10

seconds.

2. Short press “ “ button 3 times within

3 seconds when light on.

3. When light blinks slowly 3

times this means linking has

been successful.

Power Power

Unlinking failed if light is not blinking quickly, Please follow above steps again.

Note: Light haven’t linked that don’t need to unlink.

1. Switch off light then

switch on again after 10

seconds.

2. Short press “ “ button 5 times within

3 seconds when light on.

Unlinking must be the same as the

linking zone.

3. When light blinks quickly 10

times this means unlinking

has been successful.

Power Power

f light is not blinking slowly then linking has failed. Please, follow above steps again.

Note: lights that have been linked can’t link again.

Link / Unlink

button

Link / Unlink

button

Luz Negra reserves the right to modify the technical speciﬁcations of its products.

For up-to-date information, please visit our website www.luznegra.net

4/5rev.1 2023

ecoled by Luz Negra

Remote control for 4 zones

Grouping of several lights

You can add an endless number of lights to a zone on the 4-channel remote by linking the lights to different zones. This way you can be completely

ﬂexible in creating different group combinations.

Below you can see some grouping examples.

Please note::

1. The user can re-program freely as needed. One remote can control countless lamps or controllers, but one lamp or controller can only be controlled by four

remotes (max).