M-system R3Y-SV16 Bedienungsanleitung

R3Y-SV16

P. 1 / 3 EM-8955 Rev.1

BEFORE USE ....

Thank you for choosing M-System. Before use, please check

the contents of the package you received as outlined below.

If you have any problems or questions with the product,

please contact M-System’s Sales Office or representatives.

■ PACKAGE INCLUDES:

DC voltage input module ............................................ (1)

■ MODEL NO.

Check that model No. described on the specification label is

exactly what you ordered.

■ INSTRUCTION MANUAL

This manual describes necessary points of caution when you

use this product, including installation, connection and basic

maintenance procedures.

INSTRUCTION MANUAL

MODEL R3Y-SV16

DC VOLTAGE INPUT MODULE

(16 points, non-isolated)

POINTS OF CAUTION

■ CONFORMITY WITH EC DIRECTIVES

• The equipment must be mounted inside the instrument

panel of a metal enclosure.

• The actual installation environments such as panel con-

figurations, connected devices and connected wires may

affect the protection level of this unit when it is integrated in

a panel system. The user may have to review the CE

requirements in regard to the whole system and employ

additional protective measures to ensure CE conformity.

■ HOT INSERTION/REMOVAL OF MODULES

Removing or replacing modules does not affect other modules

on the same backplane. It is possible to replace them without

removing the power supply. However, replacing multiple

modules at once may greatly change line voltage levels. We

recommend that you replace them one by one.

■ ENVIRONMENT

• Indoor use

• When heavy dust or metal particles are present in the air,

install the unit inside proper housing with sufficient ventila-

tion.

• Do not install the unit where it is subjected to continuous

vibration. Do not subject the unit to physical impact.

• Environmental temperature must be within -10 to +55°C

(14 to 131°F) with relative humidity within 30 to 90% RH in

order to ensure adequate life span and operation.

■ WIRING

• Do not install cables (power supply, input and output) close

to noise sources (relay drive cable, high frequency line, etc.).

• Do not bind these cables together with those in which noises

are present. Do not install them in the same duct.

■ UNUSED INPUT CHANNELS

• Unused channels left open with certain range settings are

equal to the input lower than -15%, which sets a data

abnormality at the PLC or the host device.

In order to avoid this, use the PC Configurator Software

(model: R3CON) and specify unused channels. Refer to the

PC Configurator users manual.

■ AND ....

• The unit is designed to function as soon as power is

supplied, however, a warm up for 10 minutes is required for

satisfying complete performance described in the data sheet.

INSTALLATION

Use the Installation Base (model: R3-BSx).

R3Y-SV16

P. 2 / 3 EM-8955 Rev.1

COMPONENT IDENTIFICATION

■ DIMENSIONS mm (inch)

TERMINAL CONNECTIONS

Connect the unit as in the diagrams below and the next page.

130 (5.12)

27.5 (1.08) 110 (4.33) POSITIONING

GUIDE

20 A

RUN LED

ERR LED

Input

Connector

■ FRONT VIEW

• Pin Assignment

■ SIDE VIEW

SW1SW2

SW3

1Conv.

Rate Range

Input 1-8 (SW1)

Input 9-16 (SW2)

•Conversion Rate: SW3

SW CONVERSION RATE

100 ms (*)50 ms 20 ms 10 ms

SW3-1 OFF ON OFF ON

SW3-2 OFF OFF ON ON

(*) Factory setting

■SIDE DIP SW

•Input Range: SW1, SW2 (selectable per 8 channels)

INPUT 1 through INPUT 8 (SW1)

INPUT 9 through INPUT 16 (SW2) RANGE

1234

OFF OFF OFF OFF

-10 – +10V

(*)

ON OFF OFF OFF -5 – +5V

ON ON OFF OFF 0 – 10V

OFF OFF ON OFF 0 – 5V

ON OFF ON OFF 1 – 5V

■STATUS INDICATOR LED

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

ERR indicator: Bi-color (red/green) LED;

Red with the input circuit abnormality (AD

converter response failure);

Green in normal operating conditions.

R3Y-SV16

P. 3 / 3 EM-8955 Rev.1

M-SYSTEM WARRANTY

M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such

productwasoriginallypurchasedifsuchproducthasbeenusedundernormaloperatingconditionsandproperlymaintained,M-System'ssoleliability,andpurchaser'sexclusiveremedies,

under this warranty are, at M-System's option, the repair, replacement or refund of the purchase price of any M-System product which is defective under the terms of this warranty. To

submit a claim under this warranty, the purchaser must return, at its expense, the defective M-System product to the below address together with a copy of its original sales invoice.

THIS IS THE ONLY WARRANTY APPLICABLE TO M-SYSTEM PRODUCT AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. M-SYSTEM SHALL HAVE NO LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR

SPECIAL DAMAGES OF ANY KIND WHATSOEVER.

M-System Co., Ltd., 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN, Phone: (06) 6659-8201, Fax: (06) 6659-8510, E-mail: [email protected]

INTERNAL POWER

BUS A

BUS B*

*For dual redundant communication.

BUS CONNECTOR

20A / 20B

18A / 18B

INPUT 1

16A / 16B

14A / 14B

INPUT 2

12A / 12B

10A / 10B

INPUT 3

8A / 8B

INPUT 4

INPUT 5

INPUT 6

INPUT 7

INPUT 8

INPUT 9

INPUT 10

INPUT 11

INPUT 12

INPUT 13

INPUT 14

INPUT 15

INPUT 16

COM

11A / 11B

15A / 15B

9A / 9B

13A / 13B

6A / 6B

17A / 17B

19A / 19B

3A / 3B

2A / 2B

4A / 4B

7A / 7B

1A / 1B

5A / 5B

■ CONNECTION DIAGRAM ■ INPUT CONNECTOR (40-pin)

PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT

1A COM 1B COM

2A COM 2B COM

3A COM 3B COM

4A COM 4B COM

5A IN16 5B IN16

6A IN8 6B IN8

7A IN15 7B IN15

8A IN7 8B IN7

9A IN14 9B IN14

10A IN6 10B IN6

11A IN13 11B IN13

12A IN5 12B IN5

13A IN12 13B IN12

14A IN4 14B IN4

15A IN11 15B IN11

16A IN3 16B IN3

17A IN10 17B IN10

18A IN2 18B IN2

19A IN9 19B IN9

20A IN1 20B IN1

Andere M-system Steuereinheit Handbücher

M-system

M-system R3-NF3 Bedienungsanleitung

M-system

M-system R3-NP1 Bedienungsanleitung

M-system

M-system R3-SV8C Bedienungsanleitung

M-system

M-system M8YC Bedienungsanleitung

M-system

M-system R7ML-EC8B Bedienungsanleitung

M-system

M-system R80FST4NJ Bedienungsanleitung

M-system

M-system R7EWTU Bedienungsanleitung

M-system

M-system R7ML-EC16A Bedienungsanleitung

M-system

M-system R3S-RR8 Bedienungsanleitung

M-system

M-system R3-RR8 Bedienungsanleitung

M-system

M-system R7E-DC16B Bedienungsanleitung

M-system

M-system R7L-EC16A Bedienungsanleitung

M-system

M-system R30US2 Bedienungsanleitung

M-system

M-system R7D-DA16 Bedienungsanleitung

M-system

M-system R7M-YS2 Bedienungsanleitung

M-system

M-system R1M-A1 Bedienungsanleitung

M-system

M-system R7C-RR4 Bedienungsanleitung

M-system

M-system R5T-DA4 Bedienungsanleitung

M-system

M-system R7C-EC8B/UL Bedienungsanleitung

M-system

M-system R7L-RS4 Bedienungsanleitung

M-system

M-system R3-RS8 Bedienungsanleitung

M-system

M-system R7L-SV4-R Bedienungsanleitung

M-system

M-system R7M-SV4-R Bedienungsanleitung

M-system

M-system R7M-EC16B Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung