M2 Antenna Systems FGSD-2.4DH Bedienungsanleitung

M2 ANTENNA SYSTEMS, INC. 4402 N. SELLAND AVE. FRESNO, CA 93722

TEL: (559) 432-8873 FAX: (559) 432-3059 WEB: WWW.M2INC.COM

REV A

M2 ANTENNA SYSTEMS, INC.

MODEL NO: 2 AXIS WITH S-BAND

FEED

LOCKHEED

M2 ANTENNA SYSTEMS, INC.

MODEL NO: FGSD-2.4DH AND

FGSD-2.4DH-YS

SATELLITE DISH, M2 BACK STRUCTURE

DH, 2.4 /8 FT 4 PIECES, W/ YAGI SUPPORT

SATELLITE DISH MOUNT ASSEMBLY

DISH MOUNT BASE

PLATE

STEP 1:

Mount one SATELLITE DISH SUP-

PORT to DISH MOUNT BASE PLATE (See

FIG. 1). This support will need to align with the

holes in the SATELLITE DISH, therefore leave

the hardware loose to allow for some adjust-

ment during assembly.

FIG. 1

BOLT, 1/4-20 X 1”, FLAT ALLEN HEAD

LOCKNUT, 1/4-20

QTY (32)

SATELLITE DISH SUPPORT

FIG. 2

STEP 2A:

Install the DISH SUPPORTS for the

FGSD-2.4DH. Leave all the hardware finger

tight (See FIG. 2).

See STEP 2B for assembly FGSD-2.4DH-YS

SATELLITE DISH

SUPPORT

QTY (8)

BEFORE YOU BEGIN: Look over all the DRAWINGS to get familiar with the various parts

and assemblies in the system. Tools handy for assembly process: 11/32”, 7/16”, 1/2”, 9/16”

and 5/8” spin-tites, end wrenches and/or sockets.

NOTE:

All installations are unique in some way, which means it's OK to preassemble certain hardware, or re-

arrange the assembly process to meet specific site requirements. A quick review of the assembly

notes and drawings should help firm up the appropriate strategy. Please remember to double-check all

hardware for tightness BEFORE it becomes inaccessible.

FGSD-2.4DH

SATELLITE DISH MOUNT ASSEMBLY

STEP 3:

Mount the SATELLITE DISH MOUNT-

ING RING to the top of the SATELLITE DISH

SUPPORTS (See FIG. 4).

FIG. 4

BOLT, 1/4-20 X 1”

LOCKNUT, 1/4-20

QTY (16)

SATELLITE DISH

MOUNTING RING

FIG. 3

STEP 2B:

Install the DISH SUPPORTS for the

FGSD-2.4DH-YS. Make sure the two YAGI

SUPPORTS are adjacent to each other. Leave

all the hardware finger tight (See FIG. 3).

SATELLITE DISH

SUPPORT, YAGI

SUPPORT

QTY (2)

SATELLITE DISH

SUPPORT

QTY (6)

FGSD-2.4DH-YS

SATELLITE DISH MOUNT ASSEMBLY

SATELLITE DISH ASSEMBLY

STEP 4:

The SATELLITE DISH PANELS come with color coded

dots on the RIB to indicate which PANELS need to be mated

together for proper alignment. Each dot is labeled with SERIAL

NUMBERS and matching RIB NUMBERS (See FIG. 5).

STEP 5:

The method recommended for assem-

bling the SATELLITE DISH requires placing a

stand, which is provided, at the center of PAN-

ELS. It does not matter which PANELS you

start with as long as they both have the same

numbers labeled on the adjacent RIBS. Care-

fully place two PANELS with mating numbers

touching onto the STAND (See FIG. 6).

FIG. 5

FIG. 6

RIB IDENTIFICATION

(MATE WITH PANEL WITH SAME NUMBER)

SATELLITE DISH SERIAL NUMBER

(WILL BE DIFFERENT FOR YOUR DISH)

STEP 6:

Insert the FASTENERS provided into the

holes connecting the two PANELS together

(See FIG. 7). Leave the fasteners finger tight

until all PANELS are assembled. Continue add-

ing another PANEL with a corresponding RIB

NUMBER that matches one of the already as-

sembled PANELS. Insert the fasteners into the

third PANEL. Leave fasteners finger tight. Do

not add the FOURTH PANEL yet. You will

need to add the HUB ASSEMBLY and need to

access the center of the DISH for ease of as-

sembly.

FIG. 7

BOLT, 1/4-20 X 3/4”, SS

LOCK WASHER, 1/4”, SS

NUT, 1/4-20, SS

ASSEMBLY STAND

(PROVIDED)

STEP 7:

Attach the SATELLITE DISH to the SATELLITE DISH MOUNT ASSEMBLY (See FIG. 8).

SECTIONED SATELLITE DISH ASSEMBLY

FIG. 8

BOLT, 3/8-16 X 1-1/2”

FLAT WASHER, 3/8”

QTY (8)

FLAT WASHER, 3/8”

LOCK WASHER, 3/8”

NUT, 3/8-16

QTY (8)

SATELLITE DISH

MOUNT ASSEMBLY

STEP 8:

Attach the SATELLITE DISH MOUNT

and DISH to the ANTENNA POSITIONER (See

FIG. 9).

FIG. 9

BOLT, 3/8-16 X 1-1/4”

FLAT WASHER, 3/8”

LOCKNUT, 3/8-16”

QTY (8)

SECTIONED SATELLITE DISH ASSEMBLY

SATELLITE DISH

STEP 9:

Position the ANTENNA POSITIONER to 0 DEGREES. Attach the fourth SATELLITE DISH PAN-

EL (See FIG. 10).

THIS COMPLETES THE ASSEMBLY OF THE FGSD-2.4DH SYSTEM. CONTINUE THE NEXT PAGE

TO FINISH THE FGSD-2.4DH-YS ASSEMBLY.

FIG. 10

STEP 11:

Attach the YAGI SUPPORT BRACKET

to the EXTENDED SATELLITE DISH SUP-

PORT (See FIG 12).

FGSD-2.4DH-YS YAGI MOUNT

FIG. 11

STEP 10:

Install additional fasteners to the EX-

TENDED SATELLITE DISH SUPPORT and

the SATELLITE DISH (See FIG 11).

FIG. 12

BOLT, 5/16 X 1-1/4”

FLAT WASHER, 3/8”

LOCKNUT, 3/8-16”

QTY (8)

BOLT, 1/4-20 X 3/4”

FLAT WASHER, 1/4”

LOCK WASHER, 1/4”

NUT, 1/4-20

QTY (4)

YAGI SUPPORT

BRACKET

QTY (2)

EXTENDED

SATELLITE

DISH SUPPORT

QTY (2)

FGSD-2.4DH-YS YAGI MOUNT

FIG. 13

STEP 12:

Install the YAGI SUPPORT TUBE. Use the 2” CRADLES to mount the YAGI SUP-

PORT TUBE to the YAGI SUPPORT BRACKET (See FIG 13).

YAGI SUPPORT

TUBE

2” CRADLE

BOLT, 5/16-18 X 3-1/4”

LOCK NUT, 5/16-18

QTY (4)

THIS COMPLETES THE ASSEMBLY OF THE FGSD-2.4DH-YS SYSTEM.

FGSD-2.4DH PARTS & HARDWARE LIST

DESCRIPTION QTY

SATELLITE DISH PANEL, 2.4m (8’)............................................................................................ 4

SATELLITE DISH MOUNT BASE PLATE (M2ASD0028) ............................................................ 1

SATELLITE DISH MOUNTING RING, TOP (M2ASD0032) ......................................................... 1

SATELLITE DISH SUPPORT (SASD0004) ................................................................................. 8

SATELLITE DISH ASSY STAND, 4” X 15”, CARDBOARD (M2ASD0035).................................. 1

HARDWARE

BOLT, 3/8-16 X 1-1/2” HEX HEAD, S.S....................................................................................... 8

BOLT, 3/8-16 X 1-1/4”, HEX HEAD, S.S...................................................................................... 8

FLAT WASHER, 3/8”, S.S............................................................................................................ 24

LOCK WASHER, 3/8”, S.S........................................................................................................... 8

NUT, 3/8-16, S.S.......................................................................................................................... 8

LOCK NUT, 3/8-16, S.S. .............................................................................................................. 8

BOLT, 1/4-20 X 1”, FLAT ALLEN HEAD, S.S. ............................................................................. 32

BOLT, 1/4-20 X 1”, HEX HEAD, S.S. ........................................................................................... 16

BOLT, 1/4-20 X 3/4”, HEX HEAD, S.S. ........................................................................................ 36

LOCK WASHER, 1/4”, S.S........................................................................................................... 36

LOCK NUT, 1/4-20, S.S. .............................................................................................................. 48

NUT, 1/4-20, S.S.......................................................................................................................... 36

FGSD-2.4DH-YS PARTS & HARDWARE LIST

DESCRIPTION QTY

SATELLITE DISH PANEL, 2.4m (8’)............................................................................................ 4

SATELLITE DISH MOUNT BASE PLATE (M2ASD0028) ............................................................ 1

SATELLITE DISH MOUNTING RING, TOP (M2ASD0032) ......................................................... 1

SATELLITE DISH SUPPORT (SASD0004) ................................................................................. 6

SATELLITE DISH SUPPORT (SASD0051) ................................................................................. 2

YAGI SUPPORT BRACKET, RH (M2ASA0060).......................................................................... 1

YAGI SUPPORT BRACKET, LH (M2ASA0061) .......................................................................... 1

YAGI SUPPORT TUBE (M2ASD0063) ........................................................................................ 1

2” CRADLE (M2AMC0130) .......................................................................................................... 4

SATELLITE DISH ASSY STAND, 4” X 15”, CARDBOARD (M2ASD0035).................................. 1

HARDWARE

BOLT, 3/8-16 X 1-1/2” HEX HEAD, S.S....................................................................................... 8

BOLT, 3/8-16 X 1-1/4”, HEX HEAD, S.S...................................................................................... 8

FLAT WASHER, 3/8”, S.S............................................................................................................ 24

LOCK WASHER, 3/8”, S.S........................................................................................................... 8

NUT, 3/8-16, S.S.......................................................................................................................... 8

LOCK NUT, 3/8-16, S.S. .............................................................................................................. 8

BOLT, 5/16-18 X 3-1/4”, HEX HEAD, S.S.................................................................................... 4

BOLT, 5/16-18 X 1-1/4”, HEX HEAD, S.S.................................................................................... 8

LOCKNUT, 5/16-18, S.S. ............................................................................................................. 12

BOLT, 1/4-20 X 1”, FLAT ALLEN HEAD, S.S. ............................................................................. 32

BOLT, 1/4-20 X 1”, HEX HEAD, S.S. ........................................................................................... 16

LOCK NUT, 1/4-20, S.S. .............................................................................................................. 48

BOLT, 1/4-20 X 3/4”, HEX HEAD, S.S. ........................................................................................ 36

LOCK WASHER, 1/4”, S.S........................................................................................................... 36

FLAT WASHER, 1/4”, S.S............................................................................................................ 4

NUT, 1/4-20, S.S.......................................................................................................................... 36

Dieses Handbuch passt für folgende Modelle

Andere M2 Antenna Systems Antenne Handbücher

M2 Antenna Systems

M2 Antenna Systems 2068-26-2 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 20M5-125 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 75-5AS Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 222 HO LOOP Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 500-1000-10 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 137CP14HD Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 12M4DX Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 215-470LP16 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 222XP30 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 432-15WL Kurzanleitung

M2 Antenna Systems

M2 Antenna Systems 2M4 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 222-10EZ Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 20M6-125 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems FD35.5 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 902-14WLC Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 2M5WL Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 41-3BB Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 440-18X Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 440-6SX Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 2MCP22 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 2M4X Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 393CP18 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems FGHM64 Bedienungsanleitung

M2 Antenna Systems

M2 Antenna Systems 303CP26 Bedienungsanleitung

Beliebte Antenne Handbücher anderer Marken

Alfa Network

Alfa Network APA-L01 Bedienungsanleitung

Naval

Naval PR-422CA Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung

TERK Technologies

TERK Technologies TV44 Bedienungsanleitung

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung

HP J8999A Bedienungsanleitung

MobilSat

MobilSat MSP-S Bedienungsanleitung

Steren

Steren ANT-UHF 13 Bedienungsanleitung

Novatel

Novatel 600-G Bedienungsanleitung

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Bedienungsanleitung

TRENDnet

TRENDnet TEW-AO12O Bedienungsanleitung

Radio Shack

Radio Shack 15-1837 Bedienungsanleitung

CommScope

CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics DAP25 Bedienungsanleitung

COBHAM

COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch

Trango Systems

Trango Systems AD900-9 Bedienungsanleitung

Steren

Steren ANT-100 Bedienungsanleitung

Proxim

Proxim 5054-PA-23 Bedienungsanleitung