M2M C350 pro Bedienungsanleitung

Technical Manual 1.02, C350 Professional

Technical Manual for the

C350 pro

Version 1.02

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 2 of 38

Introduction

This manual contains technical documentation allowing easy installation and use of the

C350 pro product. For information on the programming and software configuration of the

C350 pro please refer to the M2M Control IDE documentation.

The C350 pro has been designed ground up for professional wireless industrial

applications with its strong on-board I/O capabilities and multiple communication interfaces

such as: CAN bus, 1-Wire, USB, RS232 and dual RS485 channels. The on-board I/O

system can be expanded almost indefinitely and completely transparent by adding external

MODBUS compatible I/O modules! This unique I/O expansion capability, combined with

the possibility to operate as a MODBUS master and slave simultaneously, positions the

C350 Pro as the perfect product for SCADA-like applications.

The C350 pro offers many other sophisticated features such as: A 512kbyte internal flash

drive and a SD-CARD reader with a FAT32 compatible file-system for easy sharing of files

locally and remotely with a PC/Server.

There is optional support for Bluetooth, Ethernet, Wi-Fi, Camera module and a Mobile

Data Terminal for user interaction.

The advanced power-management features on the C350 pro combined with the on-board

high-capacity Li-Ion battery allows the unit to stay in power-saving mode for a longer

period of time still being connected to the GSM network and capable of waking up on for

example GSM activity, change of digital inputs and many other events.

These features open up for the use of the C350 pro in exciting new application areas

where extremely low power consumption and flexible wake-up conditions are a crucial

parameter for successful product integration.

The C350 pro is also available with additional 8Mbyte persistent onboard memory.

Attention: the use of GSM and GPRS services can generate cost. Take care that the tariff

of the used SIM card is suitable for your application. We highly recommend not using SIM

cards where GPRS services are charged by elapsed time.

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 3 of 38

Table of Contents

Introduction ..........................................................................................................................2

Table of Contents ................................................................................................................3

Graphical view .....................................................................................................................4

External connections ...........................................................................................................5

Overview ..........................................................................................................................5

Power supply..................................................................................................................10

Digital I/O .......................................................................................................................11

Digital outputs.............................................................................................................11

Digital inputs / S0 inputs / wakeup (ignition) input ......................................................12

Analog I/O ......................................................................................................................14

Analog inputs..............................................................................................................14

Analog outputs............................................................................................................15

RS232 communication ports (EIA/TIA-232 and V.28/V.24 compatible) .........................16

Serial port 1 / programming port. ................................................................................16

Serial port 2 ................................................................................................................17

RS485 communication ports (EIA/TIA-485-A compatible)..............................................18

RS485 port (standard) ................................................................................................18

RS485 (optional).........................................................................................................19

CAN communication port ...............................................................................................20

1-Wire.............................................................................................................................21

DC-Out ...........................................................................................................................21

Human user interface ........................................................................................................22

Graphical LCD display....................................................................................................22

Keypad ...........................................................................................................................23

LED’s..............................................................................................................................24

Switches ............................................................................................................................25

DIP-Switch .....................................................................................................................25

System switch (Reset)....................................................................................................25

Internal Li-Ion battery.........................................................................................................26

GSM ..................................................................................................................................27

SIM-Card........................................................................................................................27

Antenna..........................................................................................................................27

SD-Card.............................................................................................................................28

Barcode .............................................................................................................................28

Power consumption ...........................................................................................................29

External supply...............................................................................................................29

Internal battery ...............................................................................................................29

Technical Data...................................................................................................................30

Appendix A – Unit configuration guide...............................................................................31

Appendix B – Installing the SIM-Card ................................................................................37

Appendix C – Installing the SD-Card .................................................................................38

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 4 of 38

Graphical view

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 5 of 38

External connections

Overview

Connections to external equipment are done via pluggable screw terminals located on top

and bottom side of the product. All connections are available externally for easy access;

this also includes SIM-Card and SD-Card.

On the front a human user interface is found, this includes a 144x32 easy-to-read

graphical LCD for showing information to the user, both text and graphics are fully

supported. The LCD also has icons for battery level/charging-in-progress and GSM

network status.

Eight pushbuttons are available for the user to interact with on the C350 pro unit. Also

present are four user controlled and two system LED’s for simple information and status.

Front view

Reset

Keypad

LED’s

Graphical LCD 144X32

Pin4 - - - - - - - - - - - - - - - Pin26

Pin27 - - - - - - - - - - - - - - - Pin49

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 6 of 38

The bottom side of the C350 unit has all the communication interfaces; CAN, 1-Wire,

RS232 Port 1, RS232 Port 2, RS485 Port 1 and RS485 Port 2 (optional). These are all

available on large and easy-to-use pluggable screw terminals or standardized connectors.

Also available are SIM card reader with lock, 3.3VDC output for driving external

accessories and equipment and all the analog inputs and outputs.

Bottom-side view

On the top side of the C350 unit power, digital inputs and digital outputs are available on

pluggable screw terminals. Also a standard SMA connector for an external GSM antenna,

a SD-Card reader, three DIP switches available for user/application and a mini USB-B

connector are located on the top side of the C350 unit.

Top-side view

1: SER1

SIM CARD

2: SER2

Pin4 - - - - - - - - - - - - - - - - Pin26

Pin49 - - - - - - - - - - - - - - - Pin27

GSM Antenna

SD-CARD

X3: Mini USB

DIP1

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 7 of 38

Connector X1: 6-pin SER1 connector overview.

Pin Name Description

1 TXD Transmit data from serial port 1, RS232 compatible

2 RS-DET Programming cable detect, normally unconnected

(if programming cable, connect to SGND)

3 DC-OUT +3.3V / 400mA DC-OUT for external equipment.

4 RXD Receive data for serial port 1, RS232 compatible

5 SGND Signal ground

6 SGND Signal ground

Connector X2: SER2 - RJ45 connector overview, fully RS232 compatible.

Pin Name Description

1 DSR Data set ready

2 DCD Data carrier detect

3 DTR Data terminal ready

4 SGND Signal ground

5 RXD Receive data for serial port 2

6 TXD Transmit data from serial port 2

7 CTS Clear to send

8 RTS Request to send

Connector X3: Mini USB-B connector

USB slave connector.

Reserved for future use.

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 8 of 38

Pin 4 - 26 overview.

Pin Name Description

4 CAN-H CAN-bus H-signal

5 CAN-L CAN-bus L-signal

6 SGND Signal ground

7 1Wire 1-Wire bus for ID-Button / Temperature sensor

8 1Wire-LED 1-Wire ID-Button LED

9 SGND Signal ground

10 RS485_1+ RS485 non-inverting signal for standard RS485 port

11 RS485_1- RS485 inverting signal for standard RS485 port

12 SGND Signal ground

13 RS485_2+ RS485 non-inverting signal for optional RS485 port

14 RS485_2- RS485 inverting signal for optional RS485 port

15 SGND Signal ground

16 Voice External voice

17 AIN1 Analog input 1

18 AIN2 Analog input 2

19 AIN3 Analog input 3

20 AIN4 Analog input 4

21 AGND Analog ground

22 AOUT1 Analog output 1

23 AOUT2 Analog output 2

24 AOUT3 Analog output 3

25 AOUT4 Analog output 4

26 AGND Analog ground

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 9 of 38

Pin 27 - 49 overview.

Pin Name Description

27 PGND Power ground

28 SUPP Power supply, positive (+) connection

29 SUPP Power supply, positive (+) connection

30 DOUT1 Digital output 1

31 DOUT2 Digital output 2

32 DOUT3 Digital output 3

33 DOUT4 Digital output 4

34 DOUT5 Digital output 5

35 DOUT6 Digital output 6

36 DOUT7 Digital output 7

37 DOUT8 Digital output 8

38 SGND Signal ground

39 SGND Signal ground

40 DIN1 / S0IN1 Digital input 1 / S0 input 1

41 DIN2 / S0IN2 Digital input 2 / S0 input 2

42 DIN3 / S0IN3 Digital input 3 / S0 input 3

43 DIN4 / S0IN4 Digital input 4 / S0 input 4

44 DIN5 / WAKEUP Digital input 5 / Wakeup (ignition) input

45 DIN6 Digital input 6

46 DIN7 Digital input 7

47 DIN8 Digital input 8

48 SGND Signal ground

49 SGND Signal ground

Accessories available from M2M Control for cable assembly.

Order-code Name

RT-O-TYCO-H6

TYCO p/n: 794617-6 Tyco, Connector house 6 pins. Bag with 10 pcs

RT-O-TYCO-CR

TYCO p/n: 794606-1 Tyco, Crimp Contacts for connector house. Wire size 0.2 to 0.5

mm2. Bag with 100 pcs.

RT-O-TYCO-TOOL

TYCO p/n: 91501-1

Tyco, Crimp hand tool for easy assembly of TYCO crimp contacts.

Wire size 0.2 to 0.5 mm2

Recommended tool:

Alternative tools:

Tyco 91501-1 (0.20 to 0.50mm2) RS 495-9675, Farnell 1111475

Tyco 91502-1 (0.05 to 0.15mm2) RS 495-9675, Farnell 1111476

Molex 69008-0982 (0.20 to 0.50mm2) RS 233-3059, Farnell 673122

Molex 69008-0983 (0.05 to 0.05mm2) RS 233-3065, Farnell 673134

Extraction tool: Tyco 843996-6 extraction tool. RS 495-9704, Farnell 1111477

M2M Control

by Infranet Technologies GmbH Ph: +49.40.69647-260

Tempowerkring 2 Fax: +49.40.69647-259

21079 Hamburg Email: [email protected]

Germany Web: www.m2mcontrol.de

Technical Manual 1.02, C350 Professional

Page 10 of 38

Power supply

The C350 pro unit can be supplied with 8..36VDC from an external DC power source.

Positive power is applied to the SUPP pin and ground is connected to the PGND pin.

There are two SUPP pins as these also supplies the digital outputs. If the total current

consumption on the digital outputs exceeds 1A refer to digital output section for special

attention on the wiring. Otherwise one pin would be sufficient.

There are three different ground labels: Power Ground (PGND), Signal Ground (SGND)

and Analog Ground (AGND). The signal and analog grounds are filtered from the power

ground. Power ground must only be used as power supply return path. The signal ground

is used as ground reference for digital I/O’s and serial interfaces. And the analog ground is

used as a low noise analog ground reference for the analog inputs.

The C350 pro is protected against wrong polarity. If a chassis or system grounds are

connected to either SGND or AGND a wrong polarity on the supply lines will destroy the

internal GND connection. For avoidance of such a scenario a fuse can be installed on the

positive supply.

The C350 pro also contains an internal high capacity backup battery, which will supply the

unit if the external power supply should fail or be disconnected. By default the C350 is

powered down when a power fail occur. This setting however can be changed. Please

consult theM2M Control IDE on-line help for more information. The display will

automatically turn off when external power is removed.

When the wakeup/ignition input is activated with a logical high, the C350 pro unit will wake

up if it was in power down mode.

Please Note:

•Minimum 12VDC supply is necessary for 0-10V analog output configuration.

•Minimum 16VDC supply is necessary for digital inputs 1-4 to work as S0 compliant

inputs.

Power supply pins.

Pin Name Description

27 PGND Power ground

28 SUPP Power supply, positive (+) connection

29 SUPP Power supply, positive (+) connection

Inhaltsverzeichnis

Andere M2M Controller Handbücher

M2M

M2M enginko MCF-LW13IO Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung