M3 Mobile M3 T Installationsanleitung
www.m3mobile.co.kr
M3 T
Quick Manual Ver.1.3
01
PACKAGE
▪Please check all items below are included in package box.
< M3 T >
< Adaptor >
< Cradle >
< USB cable >
< Battery >
※Warning
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
< Stylus pen >
02
FEATURES
Barcode Scan Window
Charging &
USB/Serial Port
Keypad
Battery
Camera
Battery Lock
Ear-Phone Connector
Camera Button
Scanner Button
DEVICE
< 1D Scanner > < 2D Imager >
03
FEATURES
Numbers / Characters
SCAN
Function Function
Power
Mode Change
Direction keys
Space
Enter
Reset Button
KEYPAD
04
When an unexpected error occurs while using
the device, SOFT RESET allows your device
to restart, similar to rebooting a computer.
It will adjust memory allocation - all records
and entries are retained after soft reset but
unsaved data or files may be lost.
When an unexpected error cannot be solved
with SOFT RESET, perform HARD RESET to
restart the system.
It will erase all data stored in the device
except in Flash Disk and return to its
default settings.
▪Press the RESET BUTTON briefly.
▪Press the RESET BUTTON more than 5 seconds.
SOFT RESET
HARD RESET
RESET
05
Micro SD Card Installation
▪ Remove the battery from the battery pack.
▪ Insert the Micro SD Card as shown in the left picture.
▪ Check whether it is installed properly.
CARD INSTALLATION
DEVICE SETUP
06
Inserting Battery
▪ Insert the battery to the battery pack position.
▪ Slide the battery lock to the left to lock the battery pack.
Removing Battery
▪ Slide the battery lock to the right to unlock the battery pack.
▪ Then remove the battery from the battery position.
BATTERY
DEVICE SETUP
※Warning
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of
Used Batteries According to the Instructions.
07
How to charge
▪ Supply power to the cradle using the AC
charger.
▪ Insert the PDA to device slot to start
charging the PDA.
Charging status
Charging status of the PDA and the spare
battery is indicated by LEDs.
LED charging indicator on the cradle
indicates the charging status of the spare
battery.
LED on right side in the middle of the
device indicates the charging status of the
battery attached.
CHARGING
DEVICE SETUP
Battery attached to the PDA
LED color Spare battery
The battery is being
charged. RED The spare battery is
being charged.
The battery is fully
charged. GREEN The spare battery is fully
charged.
08
DATA CAPTURE
Scanning
▪Launch the Scanner program (either ScanEmul or M3ScanTest).
▪Press the SCAN BUTTON toward barcode to read.
Imaging
▪Launch the Scanner program.
▪Press the SCAN BUTTON toward barcode to read.
Make sure the laser beam covered whole barcode to read data properly.
Make sure the laser beam covered whole barcode to read data properly.
SCANNER
※Warning
LASER LIGHT - Do not stare into beam, CLASS 2 LASER PRODUCT
1.0mW, MAX OUTPUT:650nM
09
DATA CAPTURE
Taking pictures
▪ Run the Camera program.
▪ Tab the Camera icon to take a picture.
▪ Taken pictures are stored in Photo folder.
(My Device\Flash Disk\Camera\Photo)
* Video function is not supported in M3 T.
CAMERA
※Warning
It may cause significant damage to your eyes if you directly look the flash
attached at camera module.
Inhaltsverzeichnis
Andere M3 Mobile Handheld Handbücher
M3 Mobile
M3 Mobile Orange Bedienungsanleitung
M3 Mobile
M3 Mobile MM3 Bedienungsanleitung
M3 Mobile
M3 Mobile Orange Bedienungsanleitung
M3 Mobile
M3 Mobile MM3 Installationsanleitung
M3 Mobile
M3 Mobile SM20 Series Bedienungsanleitung
M3 Mobile
M3 Mobile M3 POS Bedienungsanleitung
M3 Mobile
M3 Mobile MC-7100S Installationsanleitung
M3 Mobile
M3 Mobile UL10 Bedienungsanleitung
M3 Mobile
M3 Mobile SL10 Installationsanleitung
M3 Mobile
M3 Mobile MM3 Bedienungsanleitung
