MAC 6000 Bedienungsanleitung
MANUAL
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
MAC 6000 Hydronic Heater
2106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
Pictures
7' 11"
6' 5 "
FRONT
4'
10' 11"
LEFT SIDE
15'
RIGHT SIDE
8'7"
1'
REAR
REV
ECO
ZONE DESCRIPTION
DATE
BY
APPD
D
C
B
A
A
B
C
D
4
5
6
7
8
6
5
4
3
2
1
B
3010001
X
.1
XX
.04
XXX
.010
CL
2106 East Indiana Avenue - Bismarck, ND 58504
Office: 701-427-5831 - FAX 701-427-5531
www.macheaters.com
SolidWorks DATA
INTERPRET DRAWING PER ANSI Y14.5 - 1998
ANSI INCH
FRACTION:
1/16
ANGLES:
1
FILLETS / RADII
.06
THIS PRINT, THE EXCLUSIVE PROPERTY OF MAC, Inc., IS CONFIDENTIAL, TO BE USED ONLY
FOR THE PURPOSE FOR WHICH IT IS LOANED, RETURNED ON REQUEST, AND IS NOT TO BE
COPIED OR REPRODUCED WITHOUT WRITTEN PERMISSION.
DIMENSIONAL TOLERANCES UNLESS OTHERWISE SPECIFIED
DRAWN
DESIGNED
APPROVED
MAC, Inc.
PART NUMBER
REV
WEIGHT: 289459324650869.19000000
SCALE: 1:4
CL
4/29/2013
4/29/2013
MAC 6000 Ground Heater
SHEET 1 OF 1
REF
FINISH:
MATERIAL: MILD STEEL
SURAFACE AREA:
THIRD ANGLE
PROJECTION
3010001
MAC 6000 Hydronic Heater
2106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
Table of Contents
MAC 6000 - Specifications ........................................................1
MAC 6000 - Standard Features.....................................................2
MAC 6000 - Options .............................................................2
MAC 6000 - General Information....................................................3
MAC, Inc.Warranty ..............................................................4
General Trailering Information ......................................................6
Safe Trailer Towing Guidelines......................................................7
Make regular stops to confirm......................................................8
Wheel chock user guidelines.......................................................8
Warnings and Cautions...........................................................9
Informational Decals ............................................................12
Instructional Decals.............................................................14
Warning Decals................................................................16
Pre-Start Checklist .............................................................19
Typical Hose Layout.............................................................20
Start/Stop Procedure............................................................22
Adjusting Heater Output .........................................................23
Replacement Parts and Filters ....................................................24
Single Axle Parts - Trailer version ..................................................25
Isuzu Diesel Engine.............................................................58
Generator ...................................................................123
Riello Burner .................................................................150
Service and Maintenance Record.................................................167
Notes.......................................................................170
Quick Reference Service/Maintenance Guide........................................172
12106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
MAC 6000 Hydronic Heater
Specifications
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504, U.S.A. www.macheaters.com +1.800.272.4604
Page 7
MAC 6000 –SPECIFICATIONS
Imperial Metric
Heating Power Gross Input: 630,000 BTU/Hour 185 kW/Hour
Combustion Efficiency: 86% 86%
Engine/Genset(Isuzu): 10 hp/8 kW 7.46 kW/ 8 kW
Hose Length: 3,000 ft
6 x 500 ft
25 - 45 psi
915 m
172 - 310 kPa
1,500 GPH 5,678 LPH
225 US Gallons 852 Liters
4.5 GPH + 0.65 GPH 17 LPH + 2.46 LPH
w/genset w/genset
65° - 185° F 18° - 85° C
186 IN x 96 IN x 92 IN 4,724 mm x 2,438 mm x 2,337 mm
3,466 kg (dry)
7,640 lbs (dry)
10,440 lbs (wet) 4,736 kg (wet)
2-5/16 IN Ball hitch coupler
Powder coat
Powder coat
Hose Pressure:
HTF Flow Rate:
Fuel Capacity:
Fuel Rate:
Operating Temperature:
Dimensions (L x W x H):
Weight:
Hitch (Trailer Mounted):
Finish-Interior
Finish-Exterior
Construction: Fabricated steel, fully enclosed, with forklift tubes
and crane lifting points
Run Time:
Hose Rewind:
56 hrs @ 75%
78 hrs @ 50%
AC motor
Fuel: #1 Diesel (below 32o F/0o C), #2 Diesel
Engine Controls: PLC based operation
Heat Transfer Fluid (HTF): Propylene Glycol - JEFFCOOL P155
6 x 153 m
22106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
MAC 6000 Hydronic Heater
Standard Features and Options
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504, U.S.A. www.macheaters.com +1.800.272.4604
Page 8
MAC 6000 -STANDARD FEATURES
Trailer mounted-6,000 lb tandem leaf spring axles
16”, 6-Lug wheels and tires
2-5/16 IN Ball hitch-4 position adjustable height
Electric trailer brakes
Stop, turn and tail lights
DOT Approved
Lift jacks
“D” Ring tie downs
Engine Block Heater
Secondary fluid containment, 110% containment
Non-toxic HTF - Propylene glycol - JEFFCOOL P155
Low operating pressures
Lockable access doors
Powder coat finish
Heavy gauge welded steel
Fork lift tubes
Crane lifting points
LED lights in rear access door
MAC 6000 - OPTIONS
Pintle hitch-4 position adjustable height-(optional trailer hitch)
Spare tire and mount
Custom paint colors
Insulated curing/thawing blankets
Emergency stop
Global Positioning System (GPS)
Work light packages
Exterior LED work lights (flood or spot)
Hazardous Environment Options
LEL Monitor – 75 harmful/explosive gas detection
32106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
General Information
MAC 6000 Hydronic Heater
4
MAC 6000 Hydronic Heater
2106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
Warranty
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504, U.S.A. www.macheaters.com +1.800.272.4604
Page 10
MAC, Inc. WARRANTY
ONE (1) YEAR LIMITED WARRANTY
MAC, Inc. warrants to the original purchaser of the equipment, that all workmanship and
materials utilized in the construction of the equipment by MAC, Inc. will be free from
substantial defects in material and workmanship for a period of one (1) year from the
date of purchase.
In addition to the above warranty, these components have an extended warranty period
beyond one (1) year.
Isuzu Engine 12 months*, unlimited hours**
100% Parts/100% Labor
12-24 months*, 200 hours**
100% Parts/100% Labor
* Whichever occurs first.
** Coverage for all electrical, fuel system and turbocharger components is limited to
2yrs/1000 hours, whichever occurs first.
Note: In the absence of a functional hour meter, the engine will be deemed to be in use for
8 hours per calendar day commencing from the start of the warranty period.
MeccAlte generator Two (2) years from delivery date to MAC, Inc.
Rear Overhead door Two (2) years from shipment to customer
This warranty extends only to the original purchaser of MAC, Inc’s equipment and is not
transferable to any other parties. MAC, Inc. does not assume responsibility for any
promises, warranties, or representations beyond those expressed in the written
document.
MAC, Inc.’s obligations and understandings in this warranty are limited to the repair or
replacement, at its option, of any defective products manufactured by MAC, Inc, and in
no event shall MAC, Inc. be liable for any consequential, indirect, or incidental costs or
damages, including loss of use or any other damages of any type arising out of such
defective parts or products.
Some States in the U.S.A. do not allow exclusion or limitation of incidental or
consequential damages or implied warranties. In addition you may have other rights
which vary from state to state. Any items of this warranty which conflict with the laws of
our state are deemed amended by the law of your state.
52106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
Warranty (cont.)
MAC 6000 Hydronic Heater
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504, U.S.A. www.macheaters.com +1.800.272.4604
Page 11
MAC, Inc. WARRANTY - (continued)
In the event that you believe any product manufactured by MAC, Inc. has a defect or
malfunction or failure to conform to this written warranty, you should contact MAC, Inc.
at its Bismarck, ND address:
MAC, Inc.
2106 East Indiana Ave.
Bismarck, ND U.S.A. 58504
+1.800.272.4604
www.macheaters.com
Follow this procedure for warranty:
1. Contact MAC, Inc. at +1.800.272.4604
2. Ask to speak to a service representative
3. Have the following information ready when you call
a. Original purchaser’s company name
b. Model number of your equipment
c. Serial number of your equipment
d. Purchase date of your equipment
4. Defective product may need to be returned to MAC, Inc. with the freight prepaid.
Take appropriate precautions against damage during shipping.
5. Supply the following information with the returned product
a. Name, address, contact person and telephone number of the original
purchaser of the equipment and indicate the date of purchase.
b. Serial number and model number defective part is attached
MAC, Inc. will replace or repair any defective products within a reasonable period of
time and return them to you. If MAC, Inc. determines there is no failure to this limited
warranty, you will be notified to retrieve your product from the service facility. MAC, Inc.
assumes no responsibility for merchandise not retrieved within thirty (30) days of
notification to the original purchaser or owner of the product.
This warranty has been drafted to comply with Federal legislation and rules
promulgated by the Federal Trade Commission.
You have additional legal rights in addition to those set forth in this written limited
warranty.
62106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
MAC 6000 Hydronic Heater
GeneralTrailering Information
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504, U.S.A. www.macheaters.com +1.800.272.4604
Page 12
GENERAL TRAILERING INFORMATION
Driving a vehicle with a trailer in tow is vastly different from driving the same
vehicle without a trailer in tow. It takes longer to get up to speed. You need
more room to turn and pass, and more distance to stop when towing a trailer.
You are responsible for keeping your vehicle and trailer in control, and for all
damage that is caused if you lose control of your vehicle and trailer.
It is critical that the trailer be securely coupled to the hitch and that the safety
chains are correctly attached. Uncoupling while towing may result in death or
serious injury.
If the trailer comes loose from the hitch for any reason, we have provided safety
chains so that control of the trailer can be maintained.
Your trailer is equipped with a breakaway brake system that will apply the brakes
on your trailer if your trailer comes loose from the hitch. The safety chains and
breakaway brake system must be in good condition and properly rigged to be
effective. The breakaway brake system must not be used as a substitute for a
parking brake or wheel chocking.
Be sure your hitch and tow vehicle are rated for the Gross Vehicle Weight Rating
(GVWR) of your trailer.
Maximum towing speed 45 mph.
Be sure tires are inflated to pressure indicated on tire size and air pressure ID tag
before towing. Improper inflation can result in a blowout and loss of control,
which can lead to death or serious injury.
Be sure lug nuts are tight before each tow.
Be sure that the electric brakes and all of the lights on your trailer are functioning
properly before each tow.
Altering your trailer can damage essential safety items. DO NOT alter your
trailer.
72106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
SafeTrailerTowing Guidelines
MAC 6000 Hydronic Heater
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504, U.S.A. www.macheaters.com +1.800.272.4604
Page 13
SAFE TRAILER TOWING GUIDELINES
Before towing, check coupling, safety chains, safety brake, tires, wheels and
lights.
Check the breakaway battery. Make sure it is fully charged.
Check the wheel lug nuts or bolts for tightness. 85-95 ft. /lbs.
Check coupler tightness after towing 50 miles (80km).
Adjust the brake controller to engage the trailer brakes before the tow vehicle
brakes.
Use your mirrors to verify that you have enough room to change lanes or pull into
traffic.
Use your turn signals well in advance.
Allow plenty of stopping distance for your trailer and tow vehicle.
Do not drive faster than the conditions will allow.
Allow plenty of room for passing. A rule of thumb is that passing distance with a
trailer is 4 times the passing distance without a trailer.
Use lower gears for climbing and descending grades.
Do not ride the brakes while descending grades; this can cause overheating and
potential brake failure.
Slow down for bumps in the road. Take your foot off the brake pedal when
crossing the bump.
Slow down prior to entering a curve; maintain a constant safe speed that allows
you to remain in control of your trailer. The towing vehicle will then remain in
control of the trailer.
Do not apply the tow vehicle brakes to correct extreme trailer swaying.
Continued pulling of the trailer, and even slight acceleration, or carefully applying
the trailer brakes (using the electronic brake controller) will provide a stabilizing
force.
Inhaltsverzeichnis
Beliebte Heizung Handbücher anderer Marken
Empire Heating Systems
Empire Heating Systems WCC65 Bedienungsanleitung
Wetekom
Wetekom 92 86 43 Bedienungsanleitung
Desa
Desa SPC170-F Bedienungsanleitung
Watlow
Watlow Watrod Electric Tubular Heaters Bedienungsanleitung
Haverland
Haverland ECO-DRY GPS Series Stücklistenhandbuch
Stelpro
Stelpro ASILVC2060 Series Bedienungsanleitung