Mach M42i Bedienungsanleitung
MACH Installation Series
In-Fill Speaker
user manual
M42i
M62i
M68i
MIW62
MIW62-100
M208i
I
NTRODUCTION
DE S I G N A P P L I C A T I O N S
The in-fill speakers for the Mach installation series have been designed for commercial
venues such as cafés, clubs, department stores, conference rooms, and hotels, that require
high-fidelity in-fill sound.
The goal of the in-fill speaker design is to provide true hi-fi performance with high speech
intelligibility in a compact package. As background noise in these venues is typically
located in the mid-frequency area, the in-fill speakers are acoustically optimized for clarity
and openness in the mid-range.
The M42i and M62i are top-boxes that can be supported by the M208i sub-woofer or the
bass output of the venue’s main PA system.
The M208i is a stereo subwoofer with an integrated high-pass filter that enables the sub
and two top-boxes to be powered by one amplifier. It has been made as compact as
possible using the bandpass principle, which maximizes the output-to-size ratio.
The M68i is a full-range speaker with usable bass-output down to 60 Hz; it can be used as
a stand-alone box without subwoofer support.
All Mach in-fill top-boxes have wide, even dispersion that ensures good coverage in low-
ceiling applications.
FE A T U R E S
• Thermal protection circuit on all tweeters
• Magnetic shielding on all woofers
• 100° x 100° dispersion
• UV-stable cabinet and drive units
• Custom brackets
• Subwoofer with integrated 160 Hz crossover
• High quality European drive units
3
I
NSTALLATION
HANGING BRACKETS
Custom brackets with horizontal and vertical tilt are available for all top-boxes.
• Black hanging bracket for M42i/M62i............................................................P/N 93943001
• White hanging bracket for M42i/M62i............................................................P/N 93943002
• Special multi bracket for M68i........................................................................P/N 93943006
The MIW62 comes with a mounting bracket for ceilings as illustrated below.
4
CONNECTIONS
Always use high quality speaker cable for the best sound quality and system performance.
All in-fill models are easily connected using push terminals. For correct polarity, connect the
red (+) terminal on the amplifier to the red terminal on the speaker. Likewise, connect the black
(-) terminal on the amplifier to the black terminal on the speaker. If one speaker is connected
with reverse polarity, the result is a strong decrease in bass output and lack of focus in the
mid/high frequencies.
If supporting the in-fill top-boxes with the M208i subwoofer, connect the high-pass output on
the M208i to the top-box input. Connect only one pair of top-boxes to the subwoofer output.
Important! Do not connect the subwoofer high-pass output to the amplifier
output: this will cause damage to the amplifier.
MIW62 INSTALLATION
As a rule of thumb, correct coverage is obtained by spacing MIW62’s at a distance similar to the
height of the room.
With the 100V module included, the output of the speaker can be controlled individually by
connecting it to the - (minus) terminal and to one of the output options shown below:
The cut-out dimensions for MIW62 are 278 x 190 mm (11" x 7½").
The minimum depth required is 80 mm (3.15") without the 100V module and 100 mm (4") with
100V module.
5
O
PERATION
TWEETER PROTECTION
The tweeters are protected by a thermal protection circuit that increases impedance when the
current exceeds a safe level. The increased impedance reduces current to the tweeter, thus
protecting it against damage. The audible result is a decrease in high-frequency output. If this
happens, do not increase the high-frequency level on the EQ or tone control on the mixer: the
tweeter has reached its maximum power handling capacity. If higher output is required, more or
larger speakers are needed.
When volume is decreased and current returns to a safe level, the protection circuit
automatically restores full signal to the tweeter and the audio output returns to normal.
6
T
ECHNICAL
DATA
M42i M62i M68i M208i MIW62
Woofer 4" 6 1/2" 8" 2x8" 6 1/2"
Tweeter 1" 1" 3/4" none 1"
Power handling (IEC) 40 W 55 W 90 W 2x100 W 50 W
Power handling (Program) 100 W 160 W 250 W 2x200 W 140 W
Recommended amplifier 50 W 80 W 125 W 2x100 W 70 W
Sensitivity (1w/1m) 87 dB 88 dB 92 dB 90 dB 88 dB
Maximum SPL 104 dB 107 dB 111 dB 110 dB 107 dB
Frequency response
170-20 kHz
80-20 kHz 59-20 kHz 45-160 Hz 80-20 kHz
Nominal Impedance 8 ohm 8 ohm 8 ohm 2x8 ohm 8 ohm
Dimensions (cm) 21x14x12 30x20x16 39x25x22 54x29x39 31x22x9
Dimensions (in.) 8x6x5 12x8x6 15x10x9 21x12x15 12x9x3.5
Weight 2 kg 4 kg 6 kg 16 kg 2.2 kg
7
www.mach-audio.com
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Mach Sprecher Handbücher
Mach
Mach CW110F Bedienungsanleitung
Mach
Mach CN7 Bedienungsanleitung
Mach
Mach M12T Bedienungsanleitung
Mach
Mach CI4 Bedienungsanleitung
Mach
Mach CN7 Bedienungsanleitung
Mach
Mach SlingShot Bedienungsanleitung
Mach
Mach M72i Bedienungsanleitung
Mach
Mach MACH M62i Series Bedienungsanleitung
Mach
Mach M Flex S Bedienungsanleitung
Mach
Mach CM Series Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung