Mad Catz Hand Held Racing Wheel Bedienungsanleitung

ENGLISH

ENGLISH ENGLISH

Set-Up

• Make sure the PlayStation® game console is turned OFF.

Connect the Hand Held Racing Wheel to the Controller Port.

• Insert your disc and turn ON the console. DO NOT MOVE

THE CONTROLLER DURING START UP. The controller

uses this time to calibrate itself.

Control Modes

Mad Catz Hand Held Racing Wheel features 3 modes to ensure

the best possible control in all games. Steering Wheel mode

provides the best support for calibration and customization. Dual

Analog mode features a vibration function. Digital mode provides

control for games that don't support either Steering Wheel/neGcon

mode or Dual Analog mode.

Steering Wheel Mode - Generally has more options in the

calibration screens, allowing you to make the wheel fit to your

preferences. Nearly all driving games take advantage of the

customization and precise control available with this type of

controller, making it the most popular mode on the Hand Held

Racing Wheel. When playing a game, we recommend using

Steering Wheel/neGcon Mode whenever possible (see the Button

Equivalents chart to determine the button mapping while in this

mode).

Dual Analog Mode - There are two motors located in the Hand

Held Racing Wheel that will vibrate based on actions taking place

on screen. Check the Rear Inlay to make sure that the game is

Vibration Function compatible. Not all games allow you to

customize the steering sensitivity in this mode to the same levels

as available in Steering Wheel/neGcon mode. (see the Button

Equivalents chart to determine the button mapping while in this

mode).

Digital Mode - There are no options for calibration in this mode. If

your game doesn't support either Steering Wheel/neGcon or Dual

Analog mode, Digital mode will be the next best solution (see the

Button Equivalents chart to determine the button mapping while in

this mode).

ENGLISH

3 4

Adjusting Steering Characteristics

Many steering wheel compatible and analog controller compatible

games will offer a variety of controller configurations and settings

in the options menu of the game. The different controller

configurations will allow the user to select and assign different

functions to different buttons.

Some Steering Wheel/neGcon compatible games will allow you to

set the maximum range for steering (sensitivity) as well as the

dead zone (distance turned before steering wheel reacts) in the

game option menus. These two settings can be instrumental for

tailoring the controls to your driving preferences.

Setting the maximum steering range higher will cause it to be less

sensitive and conversely, the lower the maximum steering range,

the more sensitive the wheel will become. We recommend setting

the wheel to approximately 90 degrees and playing, then

adjusting it to your personal preferences if necessary.

The dead zone is not always available to modify, but when it is,

we recommend playing with approximately 5 degrees. If the dead

zone is too large, it will cause the steering wheel to feel sluggish

and unresponsive. If the number is too small, the vehicle will

swerve because the steering is too touchy. After playing, adjust to

your personal preferences if necessary.

FIGURE A

BUTTON EQUIVALENTS

MODE ACTION BUTTONS GAS/BRAKE

Steering Wheel I II A B L R L R L R I / II

Dual Analog Mode X ■■O▲▲L1 R1 L2 R2 L3 R3

Digital Mode X ■■O▲▲L1 R1 L2 R2 L1 R1 X / ■■

Programming

The Hand Held Racing Wheel has been designed to be fully

programmable. Reprogramming the button layout allows the user

to completely customize the controller to fit their preferences. Any

button can be re-mapped. To re-map a button, press the Program

button one time. (Note: While in Program mode, the controller will

not function in a game). After the Program button has been

pressed, the Program LED will light up showing that you may

begin programming. Press the button you would like to re-map

and then press the button that has the desired function (LED

shuts off). For example, to make the L2 button function as the

X button, the following steps would be followed.

1. Press Program button

2. Press L2

3. Press X

To clear the configuration and reset it back to the default settings,

press the Program button, the press the button to be reset twice.

All programming must be done one session at a time. If you wish

to change multiple buttons, repeat the steps above for each

button you wish to change.

ENGLISH

Hand Held Racing Wheel Layout

Steering Wheel - This is the heart of the controller. Because it is

true analog, you will get more responsive and accurate control.

Acceleration/Brake Trigger - Provides analog acceleration

(pulling the trigger) and braking (pushing the trigger).

Directional Pad - This emulates the Directional Button found on

almost all controlers. Primarily used for navigating through the

menus and making menu changes.

Program Button - Allows the user to change the function of any

button (see Programming on page 6).

Mode Button - Allows you to toggle between different modes

(refer to the Control Modes section above to determine what

mode is best for the game you are playing).

Additional Buttons - The Hand Held Racing Wheel has twelve

additional buttons (see Figure B).

FIGURE B

Troubleshooting

Below are answers to frequently asked questions.

The Hand Held Racing Wheel will not function.

• Check the mode. If the game does not support the mode

you are playing in, it may not register. Try changing modes

(using the mode button).

• If the Hand Held Racing Wheel continues to not function,

turn the power to your PlayStation game console OFF,

disconnect the Hand Held Racing Wheel and reconnect the

Hand Held Racing Wheel. Then turn on the console and

retry the game.

The connector section of the peripheral has only 8 pins. Is

this normal?

• Yes. The Hand Held Racing Wheel only uses 8 of the 9

available pins. The other pin is left out of the connector

because it is not needed.

Vehicle control is touchy or sluggish.

• Go to the options menu and adjust the steering sensitivity

and dead zone if available.

The vehicle drifts in one direction.

• The Steering Wheel needs to be re-centered. Hold down the

L1, R1, and Start buttons at the same time. This will perform

the re-centering (or alternatively reset the console).

The game acts as if the trigger is being activated.

• The Trigger needs to be re-centered. Hold down the L1, R1,

and Start buttons at the same time. This will perform the

re-centering (or alternatively reset the console).

ENGLISH

Troubleshooting (continued)

I'm playing a Vibration Function compatible game and its not

vibrating.

• Some software titles require you to manually turn the

vibration option on in the option menus.

• Try switching the Hand Held Racing Wheel to Dual Analog

mode.

Inhaltsverzeichnis

Andere Mad Catz Videospiel-Controller Handbücher

Mad Catz

Mad Catz ROCK BAND 3 MIDI PRO-ADAPTER 96071 Bedienungsanleitung

Mad Catz

Mad Catz Street Fighter V FightPad PRO Bedienungsanleitung

Mad Catz

Mad Catz Lynx Bedienungsanleitung

Mad Catz

Mad Catz DUAL FORCE 2 Bedienungsanleitung

Mad Catz

Mad Catz Street Fighter V Arcade FightStick Alpha Bedienungsanleitung

Mad Catz

Mad Catz WIRELESS Z-CHUK 5746-MUG-R2 Bedienungsanleitung

Mad Catz

Mad Catz LYNX XBOX Bedienungsanleitung

Mad Catz

Mad Catz RB2 9766 MUG Bedienungsanleitung

Mad Catz

Mad Catz F.L.Y. 5 Bedienungsanleitung

Mad Catz

Mad Catz Lynx Bedienungsanleitung

Mad Catz

Mad Catz 900MHz DUAL FORCE 2 Bedienungsanleitung

Mad Catz

Mad Catz MC2 Bedienungsanleitung

Mad Catz

Mad Catz C.A.T. 7 Bedienungsanleitung

Mad Catz

Mad Catz L.Y.N.X. 3 Bedienungsanleitung

Mad Catz

Mad Catz Rock band 3 Bedienungsanleitung

Mad Catz

Mad Catz C.T.R.L. R Bedienungsanleitung

Mad Catz

Mad Catz C.A.T. 12 Bedienungsanleitung

Mad Catz

Mad Catz CAT9 Bedienungsanleitung

Mad Catz

Mad Catz MLG Pro Circuit Bedienungsanleitung

Mad Catz

Mad Catz street fighter V arcade fightstick tournament edition... Bedienungsanleitung

Mad Catz

Mad Catz CUBICON Bedienungsanleitung

Mad Catz

Mad Catz CAT 7 Bedienungsanleitung

Mad Catz

Mad Catz Z-CHUK BACK5716-MUG-R2 Bedienungsanleitung

Mad Catz

Mad Catz C.T.R.L. Smart Gebrauchs- und Pflegehandbuch

Beliebte Videospiel-Controller Handbücher anderer Marken

Wasp

Wasp SL-6610 Bedienungsanleitung

JKG

JKG JKG2022A Bedienungsanleitung

Marvo

Marvo MG08 Bedienungsanleitung

Belkin

Belkin F8GBPC001 Bedienungsanleitung

GameSir

GameSir Z2 Bedienungsanleitung

Laser

Laser PCO-AGAMEC-BK Bedienungsanleitung

Cortex

Cortex VEXnet Bedienungsanleitung

Gioteck

Gioteck HF-1 Bedienungsanleitung

Nacon

Nacon DAIJA ARCADE STICK Bedienungsanleitung

Thrustmaster

Thrustmaster dual trigger Bedienungsanleitung

SHAKS

SHAKS S1+ Bedienungsanleitung

YCCTEAM

YCCTEAM Joy Con Bedienungsanleitung

Hyperkin

Hyperkin Smartboy Bedienungsanleitung

Nerf

Nerf DuraGrip Bedienungsanleitung

MoveMaster

MoveMaster MoveMaster Bedienungsanleitung

WinWing

WinWing Super Libra J1 Bedienungsanleitung

ECCI

ECCI Trackstar 6000 Series Bedienungsanleitung

Logitech

Logitech 963291-0403 - Attack 3 Joystick Bedienungsanleitung