Maestro MR569 Bedienungsanleitung
Сerticated in Ukraine
Виріб сертифіковано в Україні
Model/Модель: MR569
Owners manual. Blender To GO
Bedienungsanleitung. Stabmixer To GO
Instrukcji obsługi. Blender To GO
Manualul proprietarului. Blender To GO
Руководство по эксплуатации. Блендер To GO
Керівництво з експлуатації. Блендер To GO
EN
DE
PL
UA
RU
RO
091
2
Pictures/ Bilder/Rysunki/ Figuri/ Рисунки/ Малюнки 1
Description of the appliance___________________________________________4
Gerät_______________________________________________________________13
Konstrukcja urządzenia_______________________________________________25
Structura produsului____________________________________________________36
Устройство прибора____________________________________________________47
Склад приладу________________________________________________________58
EN
DE
PL
UA
RU
RO
1
2
3
4
5
6
3
Dear customer, we thank you for purchase of goods
Functionality, design and conformity to the quality standards
guarantee to you reliability and convenience in use of this device.
Please read and comply with these original instructions prior to the
initial operation of your appliance and store them for later use
of subsequent owners.
Blender is designed only for handling (mixing) liquid and not solid
products in domestic conditions.
Under condition of observance of user regulations and a special-
purpose designation, a parts of appliance do not contain unhealthy
substances.
Technical specications
Model MR569
Electrical supply:
Alternating current- AC;
Rated voltage 220-240V;
Rated frequency 50Hz;
Power consumption 350W
Protective class II
Protection class IPX0
Regime of operation: continuous operation during max. 60 sec.,
pause during at least 2 min. to complete cooling.
EN
4
Description of the appliance
Picture1 (page 2)
1. Spill-proof drinking lid
2. Sport bottle
3. Blade assembly
4. Blender base
5. Switch button
6. Power cord
Safety instructions
When using your appliance, basic safety precautions should
always be followed, including the following:
SPECIAL INSTRUCTIONS
ATTENTION!
NEVER immerse the electric drive case, cable or plug in any liquid.
NEVER touch the appliance with wet or damp hands.
ALWAYS disconnect appliance before cleaning, assembling,
disassembling, loading and unloading products
Failure to observe these rules may result in electric shock!
- DO NOT let children or untrained persons use the appliance
without supervision.
- DO NOT leave the appliance unnecessarily plugged in. Disconnect
the plug from the mains when the appliance is not being used.
- DO NOT use the power cord or the appliance in order to pull the
plug out of the socket.
- DO NOT leave the appliance exposed to the weather (rain, sun,
etc. ).
5
- DO NOT leave the appliance without supervision when it is
connected to the power supply.
- Close supervision is necessary when the appliance is used near
children.
- Always unplug from the plug socket when not in use and before
cleaning.
- Do not operate the appliance if damaged, after an appliance
malfunctions or it has been damaged in any manner, return to at
authorized service engineer for repair.
- In the interest of safety, regular periodic close checks should be
carried out on the supply cord to ensure no damage is evident.
Should there be any signs that the cord is damaged in the slightest
degree, the entire appliance should be returned be authorized
service engineer.
- Do not let the cord hang over the edge of a table or counter or
touch hot surfaces. Allow unit to cool before storage.
- Do not use harsh abrasives, caustic cleaners or oven cleaners
when cleaning this appliance.
- This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
-If your device was brought from cold to warm room, do not switch
it on within 2 hours to prevent damage due to condensation on
internal parts.
-Do not use damaged nozzles.
EN
6
ATTENTION!
The device has very sharp cutting blades which demand
extremely careful handling.
- Do not touch moving parts during the blender operation
- Always disconnect appliance before cleaning, assembling,
disassembling, loading and unloading products
Perform assembly and disassembly only after full stop of moving
parts.
In case of failure to observe the rules a danger of serious
damages may arise!
- THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. DO NOT
USE THE APPLIANCE FOR ANYTHING OTHER THAN INTENDED
USE.
Purchase industrial devices for commercial use.
Actions in extreme situations:
- If a device tumbled into water, immediately, unplug the device, not
touching to the device or water.
- In case of appearance from appliance of smoke, sparkling, strong
smell of a burn isolation, immediately stop use the device, unplug
the device, appeal to the nearest service center.
Operation
With this blender, you can prepare fruit juices, cocktails, smoothies,
cream soups, sauces, desserts, baby foods.
Observe safety rules when using blender. Uninterrupted work of the
blender cannot exceed 60 sec., the next pause must be at least 2
min. to complete cooling of the device.
Do not ll the bottle with products the temperature of which is above
60 ℃. Cool hot products before handling.
Peel fruits and vegetables, remove pits and cut into pieces 2х2cm in
7
size before the beginning of handling.
Do not handle very hard products such as: serials, rice,
coee, ice, frozen products.
- Place the bottle on a stable, even surface and ll it with ingredients
not exceeding the «MAX» mark.
- Fix the shredder drive to the open bowl of the bottle until xation.
Turn the bottle with the shredder down and install it on the electric
driver body until the arrowheads are aligned.
- Connect the device to the mains of 220 - 240 V, 50 Hz and press
the switch button.
- The blender operates in the pulse mode. To start the blending
process, turn and hold the bottle container clockwise. Having
reached the desired consistency of the blending products and the
completion of work, stop applying a mechanical action and turn the
bottle – the blending will be completed.
EN
8
- After using, disconnect the appliance from the mains, disconnect
the bottle from the electric driver body by turning it counter-
clockwise. Install it on an even, stable surface upwards with the
drive of the shredder. Replace the drive of the shredder by the lid.
Preparation for work
- Before the rst use remove packing material, make sure that all
parts of the device are not damaged.
Before the rst use wash all removable parts with warm water and
detergent and thoroughly dry.
- It is prohibited to submerge the case of electric drive, its mains
connector and the plug in water or any other liquid.
Attention! At the time of the rst switching on the device, a specic
smell or smoke may appear for a short time. These are normal
phenomena due to the presence of preservation materials on the
electric drive motor. They shall disappear after several minutes of
the device operation.
9
Cleaning and maintenance
ATTENTION!
- Never clean the device while it is connected to the mains.
- Before cleaning disconnect the device and wait for full stop of
moving parts.
- Do not use abrasive and aggressive detergents, solvents, alkaline,
metal objects and wash-ups.
- Never submerge electric drive, its mains cable and plug in water
or other liquid, do not wash the drive in water or in a dish washing
machine.
-Wash cutting blades with special care!
Immediately after the use wash (without soaking for a long time)
the nozzles with warm soapy water using a soft nylon sponge, then
wipe with a dry clean towel. Water temperature must not exceed
60ºС. The blender can be washed in a dish washing machine;
however, the dosage of detergent must not be exceeded. After
handling some coloring products (for example, carrots) plastic parts
of the nozzle may become colored. After placing them in a dish
washing machine wipe them with vegetable oil.
After handling salty products the blender must be washed
immediately.
Let the blender completely dry.
Do not submerge and do not wash under a strong ow of water
the cover – chopper drive and the drive of wire whisk. It is
recommended to wipe them with a wet cloth; in case of strong
clogging it is allowed to wash the outside surfaces under a weak
water spray or with a wet napkin avoiding the splashes inside the
case.
EN
10
Wipe the case of the electric drive with a soft cloth and rub it dry
with a clean towel.
- Clean, wipe dry and dry the device before storage.
Storage
- Wipe and dry the appliance before storage.
- Store the appliance in a cool, dry and clean place beyond the
aссess of children and people with limited physical and mental
abilities.
Environmental protection
Old appliances contain valuable materials that can be recycled.
Please arrange for the proper recycling of old appliances. Please
dispose your old appliances using appropriate collection systems.
Subject to technical modications!
Inhaltsverzeichnis
Sprachen:
Andere Maestro Mixer Handbücher
Maestro
Maestro MR563 Bedienungsanleitung
Maestro
Maestro MR511 Bedienungsanleitung
Maestro
Maestro MR567 Bedienungsanleitung
Maestro
Maestro MR-566 Bedienungsanleitung
Maestro
Maestro MR561 Bedienungsanleitung
Maestro
Maestro MR509 Bedienungsanleitung
Maestro
Maestro MR510 Bedienungsanleitung
Maestro
Maestro MR562 Bedienungsanleitung
