Maestro E206XT Bedienungsanleitung

The Maestro E206XT is a powerful and highly configurable cellular modem and router. This article

details configuring the Maestro E206XT to provide Internet access to an eGauge meter using a

direct Ethernet connection, as well as other general information. Any advanced configuration

questions should be directed to Maestro Wireless Solutions directly.

Additional resources:

Manufacturers product page



The SIM card should come pre-installed if the E206XT is purchased directly from eGauge.

However, if this is not the case the SIM card can be installed or replaced as needed.

Using a paperclip or similar instrument, gently push in the small yellow button to the right of the

SIM tray. This will cause the tray to partially eject from the E206XT, at which point it can be

removed the rest of the way by hand.



To reinstall the SIM tray, gently press it back into the E206XT. The SIM card should have the

contact points facing upward. DO NOT force the SIM tray into the E206XT, as damage may result.

SIM Card Installation

Configuration

(Legacy): Maestro E206XT

cell router configuration

When purchased from eGauge Systems, the Maestro E206XT is pre-configured for the T-Mobile

network, along with both Ethernet ports configured for LAN access. In the event the Maestro is re-

configured or factory reset and must have the eGauge configuration applied, follow these

instructions.

1. Perform a factory reset, if not already done.

2. Power up the E206XT using the included power supply.

3. Using an Ethernet cable, connect a computer to port LAN1 on the E206XT. Make sure all

forms of wireless communication are disabled on the computer.

4. Open a web browser and navigate to 192.168.1.1. Log in using "admin" for both

username and password.

Verify and update firmware

5. Navigate toStatus->Overview. Look atFirmware Versionunder theSystem

section. If at2.0.1 RC7, skip toInstall Configuration File.(Warning: firmware 2.1.1

RC6 is unstable and must not be used).

6. Downloadmaestro-e206-v201RC7-15122015.binwhich is found attached to this

article. Alternatively, download fromMaestro's website.

7. Navigate toSystem->Backup/Flash firmware. InFlash new firmware image,

choosemaestro-e206-v201RC7-15122015.binand pressFlash image. The

checksum should validate tofc06331a0057750b716044757ed470ab.

8. When finished the device will reboot. Restart at step 4 to ensure new firmware took effect.

Install configuration file

9. Downloadbackup-Maestro-2017-02-24.tar.gzfrom this article.

10. Navigate toSystem->Backup/Flash firmware.

11. In theBackup / Restoresection, choosebackup-Maestro-2017-02-24.tar.gzand

pressUpload archive.

12. The unit will reboot after installing the configuration. You can ensure the settings took

affect by logging into the Maestro, clickingNexton the Quick Setup wizard, and ensuring

under theCellularsection that APN is set tofast.t-mobile.com

Reset and connect to Maestro unit

If settings are entered incorrectly or if the device password is changed and lost, a factory reset can

be performed. To do this, use a paperclip to hold down the reset button (located on the opposite

side of the E206XT from the SIM card slot) for at least five seconds.

1. Login to the Maestro as described in step 2 to step 4 of theConfigurationsection.

2. Highlight the “Status” tab at the top of the page and select “Overview” from the

dropdown menu.

3. Check to ensure that the “Network Status”, “Operator Name", “Operator Number”, and

“SIM Status” fields all display values.

4. Next, open a new tab or window in your browser. Navigate to a website of your choice to

check Internet functionality. At this point in time you may wish to run a speed test to

Factory Reset

Testing Connection

verify speed and connectivity.

When it is functioning properly, the E206XT should have a minimum of four LEDs lit. ThePower

LED should be lit solid green, theSignalandNetworkLEDs should be lit solid yellow, and the

ActivityLED should be blinking yellow if a network device is connected.

If the WiFi interface was left enabled, the WiFi LED will be lit solid blue. The WiFi interface is

disabled by default by eGauge.

If the exclamation LED (!) is lit red for over 5 minutes, it indicates a configuration or hardware

problem. Contact Maestro Wireless Solutions for assistance resolving this issue.

It may take the E206XT up to five minutes to obtain a connection after the last configuration

setting has been applied. If the E206XT has been configured as described but cannot find a

connection after five minutes, there are some common hardware issues that need to be checked.

First, make sure the SIM is correctly seated and oriented properly (contact points facing up). Mini

and Micro SIMs will not work with the X206XT.

Second, ensure that the external cell antenna is properly connected. It should be connected to the

"Cell. Main" port and all connections should be finger tight.

If settings are entered incorrectly or if the device password is changed and lost, a factory reset can

be performed. To do this, follow instructions detailed in theFactory Resetsection.



Basic Troubleshooting

Revision #1

Created Fri, Jan 31, 2020 10:30 PM by Andrew

Updated Mon, Feb 17, 2020 6:47 PM by Andrew

Andere Handbücher für E206XT

Inhaltsverzeichnis

Andere Maestro Modem Handbücher

Maestro

Maestro M1002G Bedienungsanleitung

Maestro

Maestro Executive 96M Produkthandbuch

Maestro

Maestro HERITAGE 3G SERIES Bedienungsanleitung

Maestro

Maestro 100 CDMA Bedienungsanleitung

Maestro

Maestro GSM100 Bedienungsanleitung

Maestro

Maestro M100 2G Bedienungsanleitung

Maestro

Maestro 100 3G Bedienungsanleitung

Maestro

Maestro 100 Bedienungsanleitung

Maestro

Maestro 100 3G Bedienungsanleitung

Maestro

Maestro M110 Series Bedienungsanleitung

Maestro

Maestro M100 2G Bedienungsanleitung

Maestro

Maestro 100EVO SERIES Bedienungsanleitung

Maestro

Maestro 100 Bedienungsanleitung

Maestro

Maestro M111 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung