Magellan RoadMate 2035 Bedienungsanleitung
---
Safety
This Magellan receiver
is
avehicle-navigation aid designed to
assist you
in
arriving to your selected destinations. When using
this Magellan product, these safety rules must
be
followed to
prevent accidents that can result
in
injury or death to yourself or
others:
•Please check with your state or local law enforcement for
applicable regulations regarding mounting to the windshield.
Go to www.magellanGPS.com for alternate mounting
solutions.
•When driving, the need to view the display
is
minimal. Voice
prompts will guide you to your destination. The driver should
enter data or program the Magellan receiver only when the
vehicle
is
stopped. Only avehicle passenger should enter
data or program the receiver while the vehicle
is
moving.
•It is your responsibility to comply with all traffic laws.
•Every attempt
is
made to ensure that the database
is
accurate. However, roadways, points
of
interest (POls), and
business and service locations may change over time. The
database does not include, analyze, process, consider, or
reflect any
of
the following: legal restrictions (such as
vehicular type, weight, height, width, load and speed
restrictions); road slope or grade; bridge height, width,
weight, or other limits; population density; neighborhood
quality or safety; availability or proximity
of
law enforcement,
emergency rescue, medical, or other assistance;
construction work zones or hazards; road or lane closures;
road, traffic, or traffic facilities' safety or condition; weather
conditions; pavement characteristics or conditions; special
events; traffic congestion. It
is
your responsibility to
disregard any unsafe, hazardous, or illegal route
suggestions.
•Keep the receiver safe from extreme temperature conditions.
For example, do not leave it exposed to direct sunlight for an
extended period
of
time. The maximum operating
temperature is 140°F (60°C).
•Take care when mounting the receiver
in
your vehicle,
whether using the windshield mount or other mount or
accessories, that it does not obstruct the driver's view
of
the
road, interfere with the operation
of
the vehicle's safety
devices such as air bags, or present ahazard to occupants
of
the vehicle should the receiver be dislodged while driving.
You
assume the risks associated with damage to your
vehicle or vehicle occupants as the result
of
your choices
in
mounting the receiver.
•The battery
is
rechargeable and should not
be
removed.
In
the event it should need to be replaced, please contact
Magellan Technical Support.
Please
do
not
return
this
product
to
the
place
of
purchase
without
Technical
Support
at
www.magelianGPS.com/
supportl.
Register
your
Magellan RoadMate at
www.magelianGPS.com/to keep updated on the latest
offers.
Download the User Manual
from
the
www.magellangps.com/support
for
detailed information.
Installation
Choose aLocation. The Magellan RoadMate receiver needs aclear
view
of
the sky to receive signals from the GPS satellites so choose a
location with
an
unobstructed view of the sky, commonly
on
or near the
windshield.
Clean the Surface. Clean the area on the windshield and allow the
surface to dry before attaching the mount.
Install the Car Cradle.
Attach the USB connector to
the cradle as shown. Hold
the cradle assembly firmly
against the window surface
and push lever towards the
base.
Attach the Receiver.
Connect Power.
It
is recommended that you connect the Magellan
RoadMate using the vehicle power cable before using for the first time.
The internal battery will begin charging as soon as power
is
supplied to
the Magellan RoadMate through the vehicle power cable. (When the
light on the vehicle power cable illuminates, it
is
properly connected to
vehicle power. Note some vehicles require that the ignition
be
on before
power is delivered to the power receptacle.)
General Information
Please refer to this handbook for questions
on
using the Magellan
RoadMate receiver. If you are still unable to answer your question,
check our technical support web page at: http://www.magellanGPS.com/
support!. Magellan RoadMate
AA-Power Switch
~
B - Micro-SO slot
(Not available on some
models.)
C - Power Input
(USB)
BC
Power On
Slide the power switch (A) to the left to turn the receiver on.
The first time you use the Magellan RoadMate it may take up to 4
minutes to compute your location under normal conditions. With
adverse conditions (not having aclear view
of
the sky) the time to
compute your location the first time can greatly increase.
Traffic Notice
Your Magellan RoadMate comes equipped with lifetime traffic but
requires that you use the supplied vehicle power adapter to work.
Traffic warnings will not work
if
you are using adifferent power adapter
than the one supplied or operating the receiver on internal batteries.
Satellite Signal Strength
To
view the satellite signal strength indicator, tap
on
the Menu button.
The signal strength indicator can be found
in
the upper right corner.
4bars green:
Strong signal
Blank: No satellite
signals. Unable to
compute position.
If you are not getting your current location, use these tips to improve
satellite signal reception.
Leave the garage or parking structure so the GPS receiver has a
clear view
of
the
sky.
Satellite signals can be blocked by tall buildings or
on
mountain
roads, you may intermittently see adrop
in
signal strength
in
these locations.
Battery
The Magellan RoadMate has an internal battery that
is
charged
whenever the receiver
is
being powered by the vehicle power cable or
an
external (optional) AC power adapter. It is estimated that areceiver
can operate for 2hours from afully charged battery.
To
view the battery strength indicator, access the Main menu. The
battery strength is shown below the signal strength indicator.
It can take up to 4hours to fully charge the battery, depending
on
the
battery level. The battery does not need to be fully charged to use the
Magellan RoadMate receiver.
Map Screen while Routing
A
s
c
DEF
J
I
H
G
ADisplays distance and street for next maneuver.
Tap
to
repeat last instruction.
SNext Turn instruction.
CTraffic icon with route delay time if traffic warnings appear
on
route.
DDisplays
ETA
(estimated time of arrival).
Tap
to
select
distance
to
destination, arrival time, speed or remain time
in
route.
EZoom Out
FZoom
In
GAccess Main Menu
H
pals
found
on
next few highway exits. (Displayed only
while traveling
on
ahighway.)
IAccess
Vol
ume/Mute Controls
JAccess OneTouch Menu
KCurrent Position Icon
Menu
Main Menu.
Tap
on the MENU button on the Map screen to access the
Main Menu.
Create aroute
to an address.
Access your
Address Book.
View Map
screen.
Additionally if
Routing:
Create aroute to a
point
of
interest.
I
Access UserSetting
options.
Create aroute
to your
previous
destinations.
Create aroute
to acity center.
Create aroute
o a street
intersection.
Cancel Trip.
Edit the Trip.
Detour. Turn List.
TM
OneTouch Menu
The OneTouch menu provides easy access to destinations and
searches you use most. Some buttons are assigned by default while
others can by assigned by you. User-assigned buttons can be
commonly used destinations or POI searches.
Saving Searches.
Tap
on the Assign button and you will be asked to
assign abutton as alocation or asearch. Saving asearch as a
OneTouch button gives you away
of
performing searches you may do
commonly, such as 'Nearest Coffee'
The OneTouch menu is
accessed by tapping on the
OneTouch icon found
in
the
upper right corner
of
the Map
screen.
The Edit button provides the
means to edit addresses or
searches that you have
assigned.
-~.
~c-.-.-.
-
-------.----c;;o-:o.
;;-=c;,.=-----=--o--
-~-
•.
<'"
[dlt
'l4a
~
.~
If.
m
'-,
Home
Prevlou\
POI
Gd\
AIM
Bdnk
@
(F'
@
fr
(P
A\slgn
AS\lgn AS\lgn
Assign Assign
0
(F'
(f
(j
(j:
[mergency
Assign Assign
Assign
Assign
Emergency Button. The OneTouch display has an Emergency button
that, while it is hoped you never have to use it, can provide immediate
directions and phone information for the nearest police station, hospital,
or
automotive repair facility.
TM
QuickSpell
Your Magellan RoadMate receiver
uses afeature known as
QuickSpell for entering
citi~s
and
streets. QuickSpell displays only
those keys that could
be
used to
enter acity or address that is
in
the
receiver's memory. For example,
in
the screen shown here for street
entry, only the letters that spell a
street are displayed. This greatly reduces the chance for errors as well
speeds up the address entry process.
Tapping the checkmark (Street entry) or List button (City Name entry) to
bring up alist
of
streets or cities that begin with the letters entered.
When the available cities or streets is short, the receiver will
automatically switch to the list, displaying those items that begin with the
letters you've entered.
Another way the Magellan
RoadMate makes entering an
address easy is through the use
of
Smart City Search. The Magellan
RoadMate receiver uses your
location as well as cities you've
created routes to before to try to
figure out the city you are looking
for. As you enter characters, the
'computed' city is displayed at the top
of
the screen.
Ifyou tap
on
the city at the top
of
the display or
on
the green checkmark,
it
is
selected as your destination city and you are then required to enter
the street.
Tap
on
LIST when the button is active to bring up the list
of
cities beginning with the characters you've entered. (Note that if the
number
of
cities that begin with the characters you've entered
is
short,
the list is automatically displayed.)
Andere Handbücher für RoadMate 2035
2
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
