FCC Radio Frequency Interference Statement Warning
The USB Link II has been tested and found compliant with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when installed and operated in a commercial environment. The USB
Link II generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with this user guide, may cause harmful interference to radio communications.
Operation of the USB Link II in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
CE Statement
We, Magenta Research, declare under our sole responsibility that the USB Link II, to which this
declaration relates, is in conformity with European Standard EN 55022/A1 Class A, and
EN 50082-1 (IEC 801-2, IEC 801-3, IEC 801-4)
SAFETY WARNING
Installation • This equipment is to be installed in a restricted access location.
Connection • Not for direct connection to Telecommunication Network Circuitry (TNV)
Power sources • This equipment should be operated only from the power source indicated on
the product. This equipment is intended to be used with a main power system with a grounded
(neutral) conductor. The third (grounding) pin is a safety feature, do not attempt to bypass or
disable it. This equipment can be powered from redundant power sources. Disconnect all power
sources before servicing.
Power disconnection • To remove power from the equipment safely, remove all power cords
from the rear of the equipment, or from the power source receptacle (wall plug).
Power cord protection • Power cords should be routed so that they are not likely to be stepped
on or pinched by items placed upon or against them.
Servicing • Refer all servicing to qualified service personnel. There are no user-serviceable parts
inside. To prevent the risk of shock, do not attempt to service this equipment yourself because
opening or removing covers may expose you to dangerous voltage or other hazards.
Slots and openings • If the equipment has slots or holes in the enclosure, these are provided to
prevent overheating of sensitive components inside. These openings must never be blocked by
other objects.
FCC/IC RFI STATEMENTS, SAFETY WARNING.
1
