Magicfx COMBINER RACK MFX3224 Betriebsanleitung

SFX SAFETY PART02292

rev 01-00

USER AND INSTALLATION MANUAL

ENGLISH

COMBINER

19" RACK.

MAGICFX®SFX SAFETY COMBINER 19" RACK —User and Installation Manual

INTRODUCTION

This manual contains all information required for the intended use of the equipment.

Deviation from the described intended use can result in a hazardous situation and/or

property damage.

DESCRIPTION

Product code MFX3224 ARM / DMX+ARM

connector

Neutrik® etherCON,

RJ45 (in&out)

Voltage 100 – 250 Vac

50 / 60 Hz Size (LxWxH) 24 cm x 19" x 1U

Power consumption 120 W Weight 4.15 kg

Power connector Neutrik® powerCON TRUE1

(in)

Mounting options 19" 1U rack

Technical data

The COMBINER 19" RACK is a spltter and booster device for the safety signal of the

ARM SYSTEM. The COMBINER 19" RACK acts as a slave of the connected ARM

CONTROLLER, which is the master of the safety line.

The COMBINER 19'' RACK is equipped with four (2x2) outputs that each can be

combined with a DMX signal to make a ARM+DMX output. The 19'' 1U rack size makes

it easy to combine with a DMX splitter.

For more information about the ARM SYSTEM and to learn how to congure a

complete safety system, refer to the ARM SYSTEM Conguration Manual (PART02323).

For more information about the ARM CONTROLLER and to learn how to correctly set

up and use the ARM SYSTEM, refer to the ARM CONTROLLER User and Installation

Manual (PART01882).

ARM IN

M6 SAFETY

EYE

POWER

CONNECTORS

FRONT

BACK

GROUP A/B

ARM OUT DMX IN DMX+ARM OUT DMX IN DMX+ARM OUT

GROUP A

SLAVE LINE 1MASTER LINE

GROUP B

ARM SIGNAL LED (red)

DMX SIGNAL LED (green)

SLAVE LINE 2

ARM SIGNAL LED (red)

DMX SIGNAL LED (green)

Main parts

MAGICFX®SFX SAFETY COMBINER 19" RACK —User and Installation Manual

LED indicator Light Meaning

ARM signal LED O The system is disarmed: The SFX machines cannot be operated.

Red The system is armed: The SFX machines can be operated normally.

Red

ashing

The emergency stop button is actuated or a line interruption

outside of the controller is detected. The output of the SFX

machines is disabled.

DMX signal LED Green The COMBINER BOX is receiving a DMX signal.

LED indicators

INSTALLATION

WARNING Make sure that you are familiar with and comply with the instruc-

tions from the user and installation manuals of each relevant

ARM SYSTEM component and each connected SFX machine.

NOTICE Insert a TERMINATOR in the last ARM output of each master and

each slave line to close the safety circuit. The ARM SYSTEM will not

work when a line remains open.

Install the COMBINER 19" RACK in the ARM safety circuit and connect the COMBINER

19" RACK to a power source. Check the installation variants on the next page for

connection details.

SOFTWARE SETTINGS

Make sure that the DMX/RDM settings on each SFX machine matches your wiring

setup. If the DMX signal runs separately over 5-pole XLR cables, make sure that XLR is

selected as DMX INPUT in the menu. If a combined DMX and ARM signal runs over

the ARM data (EtherCON) cables, make sure that ARM is selected as DMX INPUT in the

menu.

CORRECT DISPOSAL

This symbol on the product and / or accompanying documents means

that used electrical and electronic products should not be mixed with

general household waste. For proper treatment, recovery and recycling,

please take this product to designated collection points where it will be

accepted free of charge. Alternatively, in some countries you may be able

to return your products to your local retailer upon purchase of an

equivalent new product. Disposing of this product correctly will help save

valuable resources and prevent any potential negative eects on human

health and the environment, which could otherwise arise from

inappropriate waste handling. Please contact your local authority for

further details of your nearest designated collection point. Penalties may

be applicable for incorrect disposal of this waste, in accordance with your

national legislation.

MAGICFX®SFX SAFETY COMBINER 19" RACK —User and Installation Manual

AUse the COMBINER 19" RACK in combination with one ARM CONTROLLER to split

a master line into four DMX+ARM slave lines. The slave signals are also boosted.

BUse the COMBINER 19" RACK in combination with two ARM CONTROLLERs. For

each ARM CONTROLLER, the master line is split into two DMX+ARM slave lines.

The slave signals are also boosted.

DMX CONTROLLER

ARM CONTROLLER

DMX

POWER

terminator

insert

terminator

ARM

master

DMX + ARM

slave

COMBINER

19” RACK

DMX SPLITTER

POWER

COMBINER

19” RACK

DMX SPLITTER

DMX CONTROLLER

ARM CONTROLLER A

DMX

ARM CONTROLLER B

terminator

insert

terminator

insert

terminator

ARM

master

DMX + ARM

slave

Andere Magicfx DJ-Equipment Handbücher

Magicfx

Magicfx SHOT BASE DMX Bedienungsanleitung

Magicfx

Magicfx CO2JET II Betriebsanleitung

Magicfx

Magicfx CO2JET II Bedienungsanleitung

Magicfx

Magicfx CO2 Jet Bedienungsanleitung

Magicfx

Magicfx CO2 Jet Betriebsanleitung

Magicfx

Magicfx Super Blaster XL Bedienungsanleitung

Magicfx

Magicfx SHOR BASE MFX0360 Bedienungsanleitung

Magicfx

Magicfx STADIUMSHOT III Betriebsanleitung

Magicfx

Magicfx SMOKEBUBBLE BLASTER MFX1603 Betriebsanleitung

Magicfx

Magicfx SNOWCASE Series Betriebsanleitung

Magicfx

Magicfx BUBBLE MONSTER Bedienungsanleitung

Magicfx

Magicfx MFX3203 Betriebsanleitung

Magicfx

Magicfx MFX0803 Betriebsanleitung

Magicfx

Magicfx FLAMEBLAZER Betriebsanleitung

Magicfx

Magicfx SUPERBLASTER Betriebsanleitung

Magicfx

Magicfx SPARXTAR SPARK FX Betriebsanleitung

Magicfx

Magicfx STADIUM SHOT Bedienungsanleitung

Magicfx

Magicfx DEEJAY SHOTGUN MFX0371 Bedienungsanleitung

Magicfx

Magicfx STADIUMSHOT III Betriebsanleitung

Magicfx

Magicfx MFX1201 Bedienungsanleitung

Magicfx

Magicfx CO2 GUN II Betriebsanleitung

Magicfx

Magicfx FX-ARM CONTROLLER Betriebsanleitung

Magicfx

Magicfx STAGE SHOT II Betriebsanleitung

Magicfx

Magicfx Snowbox SNOW FX Betriebsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung