Magnavox DVD502AT Bedienungsanleitung

IMPORTANT!

Return Your Warranty Registration Card

Within 10 Days. See Why Inside.

Digital Video Disc Player

DVD502AT

Hookup Pages

8 Hookups

Connecting the DVD Player to a TV only (no stereo or amplifier)

TV has AUDIO (red and white) and VIDEO (yellow) IN jacks

DIGITALAUDIO OUT

PCM/BITSTREAM AUDIO OUT

COAXIAL S-VIDEO

OUT VIDEO

OUT R L

75V

VIDEO

L/MONO

AUDIO

VIDEO IN

LEFT AUDIO IN

RIGHT AUDIO IN

You may connect the DVD Player several different ways, depending on your existing equipment and your pref-

erences for sound and picture quality. To determine which hookup is best for you, examine the options on the

following pages, then see which best matches your situation. Before you hook up the DVD Player, remember:

●Connect the DVD Player directly to a TV. If you connect the DVD Player to a VCR, then connect the VCR

to the TV, the picture may be distorted by the copyright protection system.

●Turn off the power of all equipment before making any connections.

●Refer to the owner’s manuals of your other equipment for additional information.

●Depending on your connection, you may need to purchase additional cables.

●If you do not connect the DVD Player to a Dolby Digital or DTS Decoder, set DOLBY DIGITAL and DTS

to OFF on the DVD Player. Details are on pages 11 and 38-39. If you play a DVD when the settings are

wrong, the sound will be distorted or you may damage the speakers.

Connect the red and white audio cables to the red and white AUDIO OUT

jacks on the DVD Player and to the red and white AUDIO IN jacks on the

TV, matching the cable colors to the jack colors.

Connect the yellow video cable to the VIDEO OUT jack on the DVD Player

and to the VIDEO IN jack on the TV.

Connect the TV’s power cord to a power outlet.

Turn on the TV and set it to the Audio/Video In channel, which also may be

referred to as A/V In or Auxiliary In. This channel usually is located in the vicinity of

channel 00. See your TV owner’s manual for details.

Connect the DVD Player’s power cord to a power outlet.

Press the POWER button to turn on the DVD Player. “HELLO” will appear

briefly on the DVD Player’s display panel. You should see the DVD logo on the TV

screen. If you do not, check your connections and make sure the TV is set to the cor-

rect Audio/Video In channel.

Back of TV

(example only)

DVD Player

Hookups (cont’d) 9

Connecting the DVD Player to a TV only (no stereo or amplifier)

TV has audio (red and white) and S-Video In jacks

●For better picture quality, use an optional S-Video cable to connect the S-VIDEO OUT jack on the DVD

Player to the S-VIDEO IN jack on your TV. You will not use the VIDEO OUT jack on the DVD Player, and

you will not need the yellow video cable.

●Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 38-39. If you play a DVD

when the settings are wrong, the sound will be distorted or you may damage the speakers.

DIGITALAUDIO OUT

PCM/BITSTREAM AUDIO OUT

COAXIAL S-VIDEO

OUT VIDEO

OUT R L

75V

VIDEO

L/MONO

AUDIO

S-VIDEO IN

LEFT AUDIO IN

RIGHT AUDIO IN

Connect the red and white audio cables to the red and white AUDIO

OUT jacks on the DVD Player and to the red and white AUDIO IN jacks

on the TV, matching the cable colors to the jack colors.

Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on

the DVD Player and to the S-VIDEO IN jack on the TV.

Connect the TV’s power cord to a power outlet.

Turn on the TV and set it to the S-VIDEO IN channel. This channel usually

is located near channel 00. See your TV owner’s manual for details.

Connect the DVD Player’s power cord to a power outlet.

Press the POWER button to turn on the DVD Player. “HELLO” will appear

briefly on the DVD Player’s display panel. You should see the DVD logo on the TV

screen. If you do not, check your connections and make sure the TV is on the cor-

rect Audio/Video In channel.

Back of TV

(example only)

DVD Player

10 Hookups (cont’d)

Connecting to a TV and a Stereo

●Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 38-39. If you play a DVD

when the settings are wrong, the sound will be distorted or you may damage the speakers.

DIGITALAUDIO OUT

PCM/BITSTREAM AUDIO OUT

COAXIAL S-VIDEO

OUT VIDEO

OUT R L

75V

VIDEO

L/MONO

AUDIO

VIDEO IN

AUDIO (RIGHT) IN

AUDIO (LEFT) IN

Back of TV

(example only)

DVD Player

Back of Stereo

(example only)

Connect the red and white audio cables to the red and white AUDIO OUT

jacks on the DVD Player and to the red and white AUDIO IN jacks on the

Stereo, matching the cable colors to the jack colors.

Connect the supplied video cable (yellow) to the VIDEO OUT jack on the

DVD Player and to the VIDEO IN jack on the TV.

(Or, you may connect an optional S-Video cable to the S-VIDEO OUT jack on the

DVD Player and to the S-VIDEO IN jack on the TV.)

Plug in the Stereo’s power cord. Turn on the Stereo and select the Stereo’s

Auxiliary IN station. During Disc playback, you will adjust the volume at your

Stereo. See your Stereo owner’s manual for details.

Plug in the TV’s power cord. Turn on the TV and set it to the Video In

channel (or S-Video In channel), which usually is located near channel 00.

During Audio CD playback, you may check the status of Audio CDs on your TV

screen. During DVD playback, you will watch the program on the TV. See your TV

owner’s manual for details.

Connect the DVD Player’s power cord to a power outlet.

Press the POWER button to turn on the DVD Player. “HELLO” will appear

briefly on the DVD Player’s display panel. You should see the DVD logo on the TV

screen. If you do not, check your connections and make sure the TV is on the correct

channel.

Hookups (cont’d) 11

Connecting to a Dolby Digital Decoder or DTS Decoder

Some Discs are recorded in a 5.1 channel Dolby Digital Surround or Digital Theater System (DTS) Surround

format. These Discs will sound best if you connect the DVDPlayer to a Dolby Digital or DTS Decoder.

●You will need a coaxial digital audio cable (not supplied).

●If you connect the DVD Player to a Dolby Digital (AC-3) Decoder, set DOLBY DIGITAL to ON. Details are

on pages 38-39.

●If you connect the DVD Player to a DTS Decoder, set DTS to ON. Details are on pages 38-39.

If the DVD Player is not connected to a Dolby Digital (AC-3) or DTS decoder, set DOLBY DIGITAL and

DTS to OFF. Incorrect settings may cause noise distortion and damage the speakers.

●Select the 5.1 channel Dolby Digital Surround sound in the Disc menu.

●Connect a subwoofer and the center, front, and surround speakers to the Decoder as described in the

Decoder’s owner’s manual.

DIGITALAUDIO OUT

(PCM/BITSTREAM) AUDIO OUT

COAXIAL S-VIDEO

OUT VIDEO

OUT R L

75V

VIDEO

L/MONO

AUDIO

VIDEO IN

COAXIAL IN Back of Decoder

(example only)

DVD Player

Back of TV

(example only)

Connect a coaxial digital audio cable to the COAXIAL jack on the DVD Player

and to the COAXIAL DIGITAL AUDIO IN jack on the Decoder.

Connect the supplied video cable (yellow) to the VIDEO OUT jack on the

DVD Player and to the VIDEO IN jack on the TV. (Or, you may connect an

optional S-Video cable to the S-VIDEO OUT jack on the DVD Player and to the S-VIDEO

IN jack on the TV.)

Plug in the Decoder’s power cord. Turn on the Decoder and select the

Auxiliary IN station. During Disc playback, you will adjust the volume at the Decoder.

See your Decoder owner’s manual for details.

Plug in the TV power cord. Turn on the TV and set it to the Video In channel

(or S-Video In channel), which may be located near channel 00. During Audio

CD playback, you may check the Disc status on your TV screen. During DVD playback,

you will watch the program on the TV. See your TV owner’s manual for details.

Connect the DVD Player’s power cord to a power outlet. Press the POWER

button to turn on the DVD Player. “HELLO” will appear briefly on the DVD Player’s

display panel. You should see the DVD logo on the TV. If you do not, check your connec-

tions and make sure the TV is on the correct channel.

Connecting to a TV and an Amplifier with Digital Input jacks, Mini-Disc Deck or

Digital Audio Tape Deck

●Use a coaxial digital audio cable (not supplied) for this connection.

●If the Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound using

a Mini-Disc or Digital Audio Tape Deck.

●Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 38-39. If you play a DVD

when the settings are wrong, the sound will be distorted or you may damage the speakers.

DIGITALAUDIO OUT

PCM/BITSTREAM AUDIO OUT

COAXIAL S-VIDEO

OUT VIDEO

OUT R L

75V

VIDEO

L/MONO

AUDIO

VIDEO IN

COAXIAL DIGITAL

AUDIO IN

Back of TV

(example only)

Back of Amplifier

(example only)

DVD Player

12 Hookups (cont’d)

Connect a coaxial digital audio cable to the COAXIAL jack on the DVD

Player and to the COAXIAL DIGITAL AUDIO IN jack on the Amplifier.

Connect the supplied video cable (yellow) to the VIDEO OUT jack on

the DVD Player and to the VIDEO IN jack on the TV. (Or, you may con-

nect an optional S-Video cable to the S-VIDEO OUT jack on the DVD Player and

to the S-VIDEO IN jack on the TV.)

Plug in the Amplifier’s power cord. Turn on the Amplifier and select the

Auxiliary IN station. During Disc playback, you will adjust the volume at the

Amplifier. See your Amplifier owner’s manual for details.

Plug in the TV’s power cord. Turn on the TV and set it to the Video In

channel (or S-Video In channel). This channel usually is located near channel

00. During Audio CD playback, you may check the status of the Disc on your TV

screen. During DVD playback, you will watch the program on the TV. See your TV

owner’s manual for details.

Plug in the DVD Player’s power cord. Press the POWER button to turn

on the DVD Player. “HELLO” will appear briefly on the DVD Player’s display

panel. You should see the DVD logo on the TV. If you do not, check your connec-

tions and make sure the TV is on the correct channel.

14 Front Panel

POWERSEARCHSKIP

PAUSE

STOPPLAY

OPEN/CLOSE

OPEN/CLOSE Button

Press to open or close the Disc tray.

Details are on page 18.

PLAY Button

Press to start or resume Disc play-

back. Details are on page 18.

STOP Button

Press to stop Disc playback.

Details are on page 18.

PAUSE Button

Press to pause Disc playback.

Details are on page 21.

POWER Button

Press to turn the power on and off.

Details are on page 18.

SKIP Buttons

Press to go to subsequent or previous

Tracks or Chapters. Details are on page 24.

SEARCH Buttons

Press to fast forward or reverse playback.

Details are on page 22.

Remote Sensor

Receives a signal from your remote

control so you can operate your

DVD Player from a distance.

Rear Panel 15

DIGITALAUDIO OUT

PCM/BITSTREAM AUDIO OUT

COAXIAL S-VIDEO

OUT VIDEO

OUT R L

AC Power Cord

Connect to a standard AC outlet to

supply power to the DVD Player.

COAXIAL Jack

Connect an optional audio

coaxial digital cable here

and to the coaxial digital

Audio In jack of a decoder

or amplifier. Details are on

pages 11-12.

S-VIDEO OUT Jack

Connect an optional S-Video

cable here and to the S-Video

In jack of a television. Details

are on pages 9-12.

VIDEO OUT Jack

Connect the yellow

video cable (supplied)

here and to the TV’s

Video In jack. Details are

on pages 8 and 10-12.

AUDIO OUT Jacks

Connect the supplied audio

cables here and to the Audio

In jacks of a television or

stereo. Details are on pages

8-10.

Andere Handbücher für DVD502AT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Magnavox DVD-Player Handbücher

Magnavox

Magnavox SV2000 SVD101 Bedienungsanleitung

Magnavox

Magnavox MDV455 - Dvd-video Player Bedienungsanleitung

Magnavox

Magnavox MDV3400 Benutzerhandbuch

Magnavox

Magnavox MDV443 - Dvd-video Player Betriebsanleitung

Magnavox

Magnavox DP100MW8B A Bedienungsanleitung

Magnavox

Magnavox MDV3110 Bedienungsanleitung

Magnavox

Magnavox DV200MW8 Bedienungsanleitung

Magnavox

Magnavox MTFT716n Bedienungsanleitung

Magnavox

Magnavox MWD200GA Bedienungsanleitung

Magnavox

Magnavox DP100MW8 Bedienungsanleitung

Magnavox

Magnavox MWD200FG Bedienungsanleitung

Magnavox

Magnavox DVD609 Bedienungsanleitung

Magnavox

Magnavox DP100MW8B A Bedienungsanleitung

Magnavox

Magnavox MDV2300 Bedienungsanleitung

Magnavox

Magnavox MDV3300 Benutzerhandbuch

Magnavox

Magnavox DP170MS8 Bedienungsanleitung

Magnavox

Magnavox MSD115 Bedienungsanleitung

Magnavox

Magnavox MDV2400 Bedienungsanleitung

Magnavox

Magnavox MWD2206A Bedienungsanleitung

Magnavox

Magnavox MDV411 Betriebsanleitung

Magnavox

Magnavox MDV460 Bedienungsanleitung

Magnavox

Magnavox MDV435 Bedienungsanleitung

Magnavox

Magnavox DP170MW8B Bedienungsanleitung

Magnavox

Magnavox MDV422 Bedienungsanleitung

Beliebte DVD-Player Handbücher anderer Marken

Sony

Sony DVP-F11 Bedienungsanleitung

LENCO

LENCO DVP-740 X2 Bedienungsanleitung

JVC

JVC XV-N650BEU Bedienungsanleitung

Aiwa

Aiwa XD-DV370 Bedienungsanleitung

MedeaWiz

MedeaWiz Sprite 4K DV-S4 Bedienungsanleitung

Denon

Denon DVM-1805 - DVD Changer Bedienungsanleitung

Toshiba

Toshiba SD-3815 Bedienungsanleitung

Tevion

Tevion 44330 Bedienungsanleitung

Samsung

Samsung DVD-HD860 Bedienungsanleitung

Sylvania

Sylvania DP170SL8 Bedienungsanleitung

Toshiba

Toshiba SD-P1200 Bedienungsanleitung

Dolby Laboratories

Dolby Laboratories CP650 Bedienungsanleitung

Philips

Philips DVD737K/931 Bedienungsanleitung

Denon

Denon DVD-5900 Bedienungsanleitung

Philips

Philips DVD 951 Bedienungsanleitung

Philips

Philips DVDR3460 Bedienungsanleitung

Sony

Sony DVP-SR201P Bedienungsanleitung

Toshiba

Toshiba SD-V394SU Bedienungsanleitung