Magnavox 26MD255V - 26" Lcd-tv Bedienungsanleitung

IMPORTANT INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

SUPPLIED ACCESSORIES

REMOTE CONTROL

FUNCTIONAL OVERVIEW

CONNECTIONS

BASIC OPERATIONS

WATCHING TV

MENU ADJUSTMENT

BASIC OPERATIONS DVD

PLAY DISCS IN VARIOUS WAYS

MENU SETTING DVD

KODAK PICTURE CD PLAYBACK

TROUBLESHOOTING

TECHNICAL SPECIFICATIONS

WARRANTY PAGE

3-4

6-7

11-12

13-18

19-24

24-29

30-34

36-37

TABLE OF CONTENTS

page1

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated ’’dangerous

voltage’’ within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the

presence of important operation and maintenance (servicing) instructions

in the literature accompanying the product.

This equipment has been tested and found to comply with the limit for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does not cause harmful interference to radio or television reception which

can be determined by turning the equipment off and on, the user is encourage to try to

correct the interference by one or more of the following measure.

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Correct the equipment into an outlet on a circuit different from that to which the receiver

is connected.

●Consult the dealer or an experienced radio, TV technical for help.

●Only shielded interface cable should be used.

FCC RF INTERFERENCE STATEMENT

NOTE:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

IMPORTANT INFORMATION

page2

IMPORTANT SAFETY PRECAUTIONS

page3

The present set has been designed and manufactured to assure personal safety. Improper use

can result in electric shock or fire hazard. The safeguards incorporated in the present unit will

protect you if you observe the following procedures in installing, using and servicing. The present

unit is fully transistorized and does not contain any element that can be repaired by the user.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

15. Repair - If any of the following conditions occurs, unplug the AC cord from the AC outlet, and

request a qualified service person to perform repairs.

a) When the AC cord or plug is damaged.

b) When a liquid was spilled on the product or when objects have fallen into the product.

c) When the product has been exposed to rain or water.

IMPORTANT SAFETY PRECAUTIONS

page4

d) When the product does not operate properly as described in the operating instructions. Do

not touch the controls other than those described in the operating instructions. Improper

adjustment of controls not described in the instructions can cause damage, which often

requires extensive adjustment work by a qualified technician.

e) When the product has been dropped or damaged.

f) When the product displays an abnormal condition. Any noticeable abnormality in the product

indicates that the product needs servicing.

16. Replacement parts - In case the product needs replacement parts, make sure that the service

person uses replacement parts specified by the manufacturer, or those with the same

characteristics and performance as the original parts. Use of unauthorized parts can result in

fire, electric shock and/or other danger.

17. The LCD panel used in this product is made of glass. Therefore, it can be broken when the

product is dropped or gets shock. Be careful not to be injured by glass pieces in case the

panel is broken.

18. The LCD panel is a product of very high technology with 2,949,120 thin film transistors, giving

you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a

fixed blue, green or red point. Please note that this does not affect your product’s performance.

Make sure the following accessories are provided with the product.

SUPPLIED ACCESSORIES

page5

Power adapter Owner′s Manual

Remote control

AAA batteries

Warranty card

Quick setup guide

Insert supplied batteries via the battery compartment on the back of the remote control.

Make sure polarity matches the (+) and (-) marks inside the compartment.

REMOTE

CONTROL

page6

INSERTING BATTERIES INTO THE REMOTE CONTROL

●Do not expose remote to liquids, direct sunlight or shock.

●The remote control unit may not work properly if the remote sensor window of the Display is

under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display,

or operate the remote control unit closer to the remote sensor window.

CAUTIONS REGARDING REMOTE CONTROL UNIT

●Use the remote control by pointing it towards the remote

sensor on the TV. Objects between the remote control and

the sensor may disrupt operation.

●Effective range is 20 feet but is dependant on what your

viewing angle is.

●Range can also be affected by direct sunlight on the TV’s

sensor.

USING THE REMOTE CONTROL UNIT

page7

REMOTE CONTROL

POWER

Use to turn the unit on and off.

Number Buttons

Use to set the channel and to enter

DVD chapter numbers.

CAPTION

Use to select close caption mode.

VOLUME+/-

Use to adjust the volume.

LAST

Press to return to the previous

channel in normal viewing mode.

TV/DVD/AUX/PC

Use to bring up the AV signal source

selection screen and use the /

buttons to select between: TV, DVD,

AV1-S-Video, AV2-Video, AV3-

Component, PC-Analog(VGA), PC-

Digital(DVI), and press the OK

button to confirm.

SUBTITLE

Use to shift DVD subtitle language.

ANGLE

Use to shift DVD viewing angle.

REPEAT

Use to repeat the DVD playback.

WIDE

In DVD mode, use to set TV

display mode.

SETUP

Use to bring up DVD setup menu.

RETURN

Return to the previous menu

screen.

FF/FR

Use to play DVD fast forward/

backward.

STOP

Use to stop the DVD playback.

DVD MENU

Use to bring up the DVD root

menu.

TV MENU

Use to bring up TV menu; and

exits TV menu by pressing again.

CH+/-

Use to skip to the previous/next

channel.

MUTE

Mute the sound.

AUTO

Auto adjustment for PC signals.

OPEN( )

Use to eject the disc being played

in the disc slot, the main unit must

be set to DVD status.

OSD

Use to bring up the DVD On-

Screen-Display.

MPX

Use to select the sound multiplex

mode. (See page 16.)

PAUSE

Use to pause the DVD playback.

Cursor Buttons

Use to navigate in menus.

Use to confirm your selections.

DVD TITLE

Use to bring up the DVD title menu.

PLAY

Use to begin the DVD playback.

PREV/NEXT

Use to skip to the previous/next

chapter.

ZOOM

Use to zoom the DVD playback

picture.

SLOW

Use to slow the DVD playback speed.

P. MODE

Use to shift DVD play mode.

REMAIN

Use to display the time of the DVD

playback.

A. MODE

Use to shift the DVD playback audio

mode.

AUDIO

Use to shift DVD audio language.

FUNCTIONAL OVERVIEW

page8

FRONT VIEW

1) REMOTE SENSOR

2) POWER ON INDICATOR

3) STANDBY INDICATOR

4) POWER BUTTON: Use to turn the unit on and off.

5) TV/DVD/AUX/PC: Use to select the AV signal source among: TV, DVD,AV1-S-Video, AV2-

Video, AV3-Component,PC-Analog(VGA), PC-Digital(DVI) and use the OK button to confirm.

6) CH+/-: To skip to the previous/next channel.

7) VOLUME+/-: Use to adjust the volume.

8) DISC SLOT: Insert a DVD or CD disc to play under DVD status.

9) PLAY BUTTON: Use to begin the DVD playback.

10) PAUSE BUTTON: Use to pause the DVD playback.

11) PREV: Use to skip to the previous chapter.

12) NEXT: Use to skip to the next chapter.

13) EJECT BUTTON: Use to eject the disc being played in the disc slot.

456 7

TV/DVD/AUX/PC

VOL

PLAY

EJECT

PAUSE

Slot-load

DVD Player

REAR VIEW

78910

S-VIDEO

VIDEO

B /

R /

VIDEO

AUDIO

AV3 IN

AV OUT

AV1 IN

AV2 IN

OPTICAL

DVD OUTPUT

DVI/VGA INPUT

AUDIO

DVI

PC INPUT

DC INPUT

DC 24V 6A

VGA

PC INPUT

1) AV OUT (Composite Video and Audio

Out)

2) AV1 IN (S-Video and Audio In)

3) AV2 IN ( Composite Video and Audio In)

4) AV3 IN (Component Video(Y、PB/CB、

PR/CR) and Audio In)

5) Antenna In

6) AUDIO (VGA/DVI Input)

7) OPTICAL (DVD Output)

8) VGA INPUT

9) DVI (Digital Video Input)

10) DC INPUT

CONNECTIONS

page9

OPTICAL

DVD OUTPUT

DVI/VGA INPUT

AUDIO

DVI

PC INPUT

DC INPUT

DC 24V 6A

VGA

PC INPUT

S-VIDEO

VIDEO

B /

R /

VIDEO

AUDIO

AV3 IN

AV OUT

AV1 IN

AV2 IN

1. CONNECT TO POWER

a. Connect the mini plug of the AC power

adapter to DC IN jack on the back of the

26MD255V.

b. Connect the power plug of the AC power

adapter to the power socket.

2. SYSTEM CONNECTIONS

a. Using the antenna input: Connect the

antenna terminal from an antenna or cable

/satellite receiver to the antenna input

terminal on the 26MD255V; use the

TV/DVD/AUX/PC button and the /

buttons to set the 26MD255V’s signal source

to "TV".

b. Using the AV2 RCA Video/Audio input:

Connect compatible AV equipment to the

26MD255V through the AV2 IN jacks on

26MD255V (Composite Video and Audio

input jacks); use the TV/DVD/AUX/PC

button and the / buttons to set the

26MD255V’s signal source to "AV2-Video".

c. Using the AV1 S-Video and RCA Audio

input: Connect AV equipment to the

26MD255V through the AV1 IN jacks on

26MD255V (S-Video and Audio input jacks);

use the TV/DVD/AUX/PC button and the /

buttons to set the 26MD255V s signal

source to AV1-S-Video .

d. Using the AV3 Component input: The AV3

input may be used for Progressive scan or

HDTV inputs; use the TV/DVD/AUX/PC

button and the / buttons to set the

26MD255V’s signal source to "AV3-Component".

e. Using the VGA connector: Connect a PC

computer to the 26MD255V through the VGA

socket on 26MD255V. The Mini-plugged next

to the VGA input is for audio associated with

this type of signal. Use the TV/DVD/AUX/PC

button and the / buttons to set the

26MD255V s signal source to

PC-Analog(VGA) .

26MD255V monitor s native resolution for

computer use is 1280x768.

f. Using the DVI connector: Connect a PC

computer to the 26MD255V through the DVI

socket on 26MD255V. The Mini-plugged is for

audio associated with this type of signal.

Use the TV/DVD/AUX/PC button and the /

buttons to set the 26MD255V s signal source

to PC-Digital(DVI) .

g. Using the AV out, RCA Video/Audio

output: Connect the 26MD255V to another

TV Monitor through the AV OUT jacks on

26MD255V (Composite Video and Audio

output jacks); now you can use the TV

Monitor as an external monitor. Signals from

the Antenna, AV1, AV2 and Internal DVD

player will be available at this point.

Andere Handbücher für 26MD255V - 26" Lcd-tv

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Magnavox LCD-Fernseher Handbücher

Magnavox

Magnavox 50ME313V Bedienungsanleitung

Magnavox

Magnavox 20MF500T - 20 LCD TV Bedienungsanleitung

Magnavox

Magnavox 40MF401B Bedienungsanleitung

Magnavox

Magnavox 26MF37B Bedienungsanleitung

Magnavox

Magnavox 32MF338B/27 Bedienungsanleitung

Magnavox

Magnavox 27MS5402 - 27v 100hz Tv Montageanleitung

Magnavox

Magnavox 32MF337B - Hook Up Guide Bedienungsanleitung

Magnavox

Magnavox 50MV336X Bedienungsanleitung

Magnavox

Magnavox 19MF330B/F7 Bedienungsanleitung

Magnavox

Magnavox 37MF321D - Hook Up Guide Bedienungsanleitung

Magnavox

Magnavox 42MF337B - Hook Up Guide Bedienungsanleitung

Magnavox

Magnavox 22ME360B - Signature Series Konfigurationshandbuch

Magnavox

Magnavox 37MF231D - Hook Up Guide Bedienungsanleitung

Magnavox

Magnavox 32MF338B - 32" LCD TV Bedienungsanleitung

Magnavox

Magnavox 26MF321B/F7 Bedienungsanleitung

Magnavox

Magnavox 19MF301B Benutzerhandbuch

Magnavox

Magnavox 37MD311B Bedienungsanleitung

Magnavox

Magnavox 20MF605T - 20" Lcd Tv Bedienungsanleitung

Magnavox

Magnavox 52MF438B - 52" LCD TV Bedienungsanleitung

Magnavox

Magnavox 19ME601B Bedienungsanleitung

Magnavox

Magnavox 32MF301B Bedienungsanleitung

Magnavox

Magnavox 321D Bedienungsanleitung

Magnavox

Magnavox 39MF412B Bedienungsanleitung

Magnavox

Magnavox 15MF227B-27B - Hook Up Guide Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung