Magnavox RG57H/BG Bedienungsanleitung

Thank you for purchasing our air conditioner. Please read

this owner's manual carefully before using your air conditioner.

REMOTE CONTROL MANUAL

AIR CONDITIONER

For any service needs, call 1-855-368-8606

MAGNAVOX and SMART. VERY SMART are registered

trademarks of Koninklijke Philips N.V. and are used under

license from Koninklijke Philips N.V.

CONTENTS

Model

Rated Voltage

26FT

3.0V(Dry batteries R03/LR03 2)

Environment

Signal Receiving Range

RG57H(B)/BGE

23°F~140°F

Handling the remote control ......................................................

Remote Control Specifications...................................................

Function buttons .................. .........................................................

Remote LCD screen indicators .....................................................

How to use the basic functions........................................................

How to use the advanced functions ...............................................

Remote Control Specifications

ON/OF F

TEMP

SHORT

CUT

TIMER

OFF

MODE

FAN

SLEEP SWING LED

RG57H(B)/BGE

3 4

Before you begin using your new air conditioner, make sure to familiarize yourself with its remote

control. The following is a brief introduction to the remote control itself. For instructions on how to

operate your air conditioner, refer to the How to Use Basic Functions section of this manual.

ON/OFF

Turns the unit on or off.

MODE

Scrolls through operation

modes as follows:

AUTO

COOL

DRY

HEAT

FAN

FAN SPEED

Selects fan speeds in

the following order:

AUTO LOW

MED HIGH

SLEEP

Saves energy during

sleeping hours.

SWING

Starts and stops louver

movement.

NOT SURE WHAT A FUNCTION DOES?

Refer to the How to Use Basic Functions and

How to Use Advanced Functions sections

of this manual for a detailed description of

how to use your air conditioner.

SPECIAL NOTE

Button designs on your unit may differ

slightly from the example shown.

If the indoor unit does not have a particular

function, pressing that function s button

on the remote control will have no effect.

When there are wide differences between

Remote Control Illustration and

USER'S MANUAL on function description,

the description of USER'S MANUAL

shall prevail.

TIPS FOR USING REMOTE CONTROL

The remote control must be used within

26FT of the unit.

The unit will beep when remote signal is

received.

Curtains, other materials and direct sunlight

can interfere with the infrared signal receiver.

Remove batteries if the remote will not be

used more than 2 months.

Inserting and Replacing Batteries

Your air conditioning unit comes with two AAA

batteries. Put the batteries in the remote control

before use.

1. Slide the back cover from the remote

Control downward, exposing the battery

compartment.

2. Insert the batteries, paying attention to match

up the (+) and (-) ends of the batteries with

the symbols inside the battery compartment.

3. Slide the battery cover back into place.

BATTERY NOTES

For optimum product performance:

Do not mix old and new batteries, or

batteries of different types.

Do not leave batteries in the remote control

if you don t plan on using the device for

more than 2 months.

BATTERY DISPOSAL

Do not dispose of batteries as unsorted

municipal waste. Refer to local laws for

proper disposal of batteries.

ON/OFF

TEMP

SHORT

CUT

TIMER

OFF

MODE

FAN

LED

Function Buttons Handling The Remote Control

SLEEP SW ING

NOTE Please do not select

HEAT mode if the machine you

purchased is cooling only type.

Heat mode is not supported by

the cooling only appliance.

SHORT CUT

Sets and activates your

favorite pre-settings.

TEMP

Increases temperature in

1°F increments.

Max. temperature is

86°F.

TEMP

Decreases temperature in

1°F increments.

Min. temperature is

62°F.

TIMER ON

Sets timer to turn unit

on (see How to Use

Basic Functions for

instructions)

TIMER OFF

Sets timer to turn unit

off (see How to Use

Basic Functions for

instructions)

LED

Turns indoor unit

s LED

display on and off.

If you are sensitive to

light when you go to

sleep, you can press the

LED button to turn off

the LED display on the

unit. Press the button

again to turn it back on.

5 6

MODE display

Displays the current

mode, including:

AUTO

COOL

DRY

HEAT

FAN

Transmission Indicator

Lights up when remote sends

signal to unit

ON/OFF display

Appears when the unit is turned on,

and disappears when it is turned off

TIMER ON display

Displays when TIMER

ON is set

FAN SPEED display

Displays selected FAN SPEED:

HIGH, MED,

or LOW

This display is blank when

set to AUTO speed or DRY mode.

COOL operation

TIMER OFF display

Displays when TIMER

OFF is set

Battery display

Low battery

detection

SLEEP display

Displays when

SLEEP function

is activated

Temperature/Timer display

Displays the set temperature by default, or timer setting

when using TIMER ON/OFF functions

Temperature range: 62°F~86°F

Timer setting range: 0-24 hours

This display is blank when operating in FAN mode.

Remote LCD Screen Indicators

ON/OF F

ON/OFF

TEMP

SHORT

C UT

SHORT

C UT

TIMER

OFF

TIMER

OFF

MODE

FAN

SLEEP

LED

SWING

How To Use The Basic Functions

SETTING TEMPERATURE

The

operating temperature

range for

units is

62°F~86°F.

You can increase or decrease the

set temperature in 1°F increments.

AUTO operation

In AUTO

mode, the unit w ill automatically

select the COOL, FAN, HEAT or DRY mode

based on the set temperature.

1. Press the MODE button to select Auto mode.

2. Set your desired temperature using the

Temp

button.

3. Press the ON/OFF button to start the unit.

NOTE:

FAN SPEED can

t be set in Auto

mode.

1. Press the MODE button to select

COOL

mode.

2. Set your desired temperature using

the

Temp

button.

Press the FAN button to select the

fan speed:

AUTO, LOW, MED,or

HIGH.

4. Press the

ON/OFF button to start the

unit.

NOTE:FAN SPEEDn t be changed

DRY mode.

3. Press the FAN button to select

fan speed: AUTO, LOW, MED,or HIGH.

4. Press the ON/OFF button to start the

unit.

1. Press the MODEbutton to select

HEATmode.

2. Set your desired temperature using

the Tempor Tempbutton.

HEAT operation

NOTE:

NOTE: Heat mode is for Cooling & Heating

models only.

As outdoor drops,the

performance of your unit s HEAT function

may be affected. In such instances, we

recommend using this air conditioner in

conjunction with other heating appliance.

How To Use The Basic Functions

ON/OF F

TEMP

SHORT

C UT

TIMER

OFF

MODE

FAN

LED

ON/OF F

TEMP

SHORT

C UT

TIMER

OFF

MODE

FAN

SLEEP LED

ON/OFF

TEMP

SHORT

C UT

TIMER

OFF

MODE

FAN

SLEEP L ED

SLEEP SWING

SWING

How To Use The Basic Functions

DRY operation(dehumidifying)

Press

the

MODE

button

select

DRY

mode.

Set

your desired

temperature

using the

Temp

button.

Press

the ON/OFF button

start t he

unit.

,inca

FAN operation

Press

the MODE

button

select FAN

mode.

Press

FAN

button

select the

fan

speed:

AUTO,

LOW,

MED

HIGH.

Press

the ON/OFF button

start t he

unit.

NOTE:

You

can,t

set

temperature

FAN

mode. As a

result,

your remote

control s

LCD

screen

will not

display

temperature.

the

temperature

910

NOTE:

" 0.0h "

When setting the TIMER ON or

TIMER OFF functions, up to 10 hours,

the time will increase in 30 minute

increments with each press. After 10

hours and up to 24, it will increase in 1

hour increments. The timer will revert to

zero after 24 hours.

You can turn off either function by

setting its timer to .

2. Press the TIMER OFF button repeatedly

to set the time when you want the unit to

turn off.

3. Wait 2 seconds, then the TIMER OFF

function will be activated. The digital

display on your remote control will then

return to the temperature display.

Example: Setting unit to turn on after 2.5

hours.

Example: Setting unit to turn off after 5

hours.

2 sec

ON/OFF

MODE

FAN

SHORT

CUT

TIMER ON

TIMER OF

TEMP

LEEP

1sec

TIMER OFF function

The TIMER OFF function allows you to

set a period of time after which the unit

will automatically turn off.

This number indicates the

amount of time after the current time

that you want the unit to turn off.

For example, if you set TIMER OFF for

2 hours, will appear on the

screen, and the unit will turn off after

2 hours.

Press the TIMER OFF button. By

default, the last time period that you

set and an "h" (indicating hours)will

appear on the display.

Note:

" 2.0h "

2 sec

x10

ON/OFF

MODE

FAN

SHORT

CUT

TIMER ON

TIMER OF

TEMP

LEEP

sec

TIMER ON TIMER ON

TIMER OFF TIMER OFF

Continue to press

TIMER ON or

TIMER OFF until

desired time is

reached.

Setting the TIMER function

Your air conditioning unit has two

timer-related functions:

TIMER ON- sets the

amount of timer after

which the unit

will automatically turn on.

TIMER OFF- sets the

amount of time after

which the unit

will automatically turn off.

TIMER ON function

The

TIMER ON function

allows you to set

period of time after

which the

unit will

automatically turn on.

Press the

TIMER ON button. By

default, the last time period that you

set and an "h" (indicating hours) will

appear on the display.

Note:

This

number

indicates the

amount of time after the current time

that you want the unit to turn on.

For

example, if you set TIMER ON for

hours, " 2.0h "

will

appear on the

screen, and the

unit will turn on after

hours.

Press the

TIMER ON

button

repeatedly

to set the time

when you

want the unit to

turn on.

3. Wait 2 seconds, then the TIMER ON

function

will be activated. The

digital

display on your

remote control will

then

return to the temperature

display.

ON/OF F

TEMP

SHORT

C UT

TIMER

OFF

MODE

FAN

SLEEP L ED

Timer on

SWING

2PM 3PM 4PM 5PM 6PM 7PM 8PM 9PM

Timer starts Unit turns Unit turns

ON OFF

6 hours later

8 hours later

Setting both TIMER ON and TIMER OFF at the same time

Keep in mind that the time periods you set for both functions refer to hours after the

current time. For example, say that the current time is 1:00 PM, and you want the unit

to turn on automatically at 7:00 PM. You want it to operate for 2 hours, then automa-

tically turn off 9:00 PM.

Do the following:

ON/OFF

MODE

SHORT

CUT

TIMER ON

TEMP

sec

X12

X16

TIMER ON TIMER ON

TIMER OFFTIMER OFF

Example:

Setting

the

unit to

turn on after 6 hours, operate

for 2 hours,

then

turn off

(see

the

figure

below)

Your

remote

display

Timer on

Timer is set to turn ON

6 hours from current time

Timer off

Timer is set to turn OFF

8 hours from current time

SWING Function

The SLEEP function is used to decrease

energy use while you sleep (and don t need

the same temperature settings to stay

comfortable). This function can only be

activated via remote control.

Note: The SLEEP function is not available

in FAN or DRY mode.

SHORTCUT function

Used to restore the current settings or resume

previous settings.

On the first time connecting to the power, if

push the SHORTCUT button, the unit will

operate on AUTO mode, 80°F and fan speed is

Auto.

Push this button when remote control is on,

the system will automatically revert back to

the previous settings including operating mode,

setting temperature, fan speed level and sleep

feature (if activated).

If pushing more than 2 seconds, the system

will automatically restore the current operation

settings including operating mode, setting

temperature, fan speed level and sleep

feature(if activated ).

Used to stop or start louver movement and set

the desired up/down air flow direction. The louver

changes 6 degrees in angle for each press(some

models without). If keep pushing more than 2

seconds, the louver auto swing feature is activated.

How To Use The Advanced Functions

ON/OFF

TEMP

SHORT

CUT

TIMER

OF F

MODE

FAN

LED

SLEEP SWING

SLEEP Function

NOTE:

-The device could comply with the local national regulations. In Canada,

it should comply with CAN ICES-3(B)/NMB-3(B). In USA, this device

complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interfe-

rence, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

-This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not approved by the party responsible for

compliance could void user s authority to operate the equipment.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Magnavox Fernbedienung Handbücher

Magnavox

Magnavox MRU2600 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU2600 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU3500 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU2500 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU2500 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU1400 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MC345 Bedienungsanleitung

Magnavox

Magnavox W-08CR Bedienungsanleitung

Magnavox

Magnavox MRU3300 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU2401 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MC348 Bedienungsanleitung

Magnavox

Magnavox MRU3300 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU4100 Bedienungsanleitung

Magnavox

Magnavox MRU2600 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU1400 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU1400 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU2401 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox RG15AE Bedienungsanleitung

Magnavox

Magnavox MRU2500 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MC345 Bedienungsanleitung

Magnavox

Magnavox MRU3500 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU1300 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU3300 - Universal Remote Control Bedienungsanleitung

Magnavox

Magnavox MRU1301 Universal Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung