Magnavox 17MD255V Bedienungsanleitung

Important Information

Important Safety Instructions

Supplied Accessories

Remote control

Functional Overview

Connections

Basic Operations

Watching TV

Menu Adjustment

Basic Operations DVD

Play Discs In Various Ways

Menu Setting DVD

MP3 Operations

Kodak Picture CD Playback

Troubleshooting

Technical Specifications

Warranty Page

2-3

5-6

10-11

12-17

18-23

24-29

30-34

37-38

Table of Contents

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated ’’dangerous

voltage’’ within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the

presence of important operation and maintenance (servicing) instructions

in the literature accompanying the product.

This equipment has been tested and found to comply with the limit for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does not cause harmful interference to radio or television reception which

can be determined by turning the equipment off and on, the user is encourage to try to

correct the interference by one or more of the following measure.

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Correct the equipment into an outlet on a circuit different from that to which the receiver

is connected.

●Consult the dealer or an experienced radio, TV technical for help.

●Only shielded interface cable should be used.

Fcc Rf Interference Statement

NOTE:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

WARNING: To reduce the risk of fire or electric shock, do not expose this Product to

rain or moisture.

Important Information

page1

The present set has been designed and manufactured to assure personal safety. Improper use

can result in electric shock or fire hazard. The safeguards incorporated in the present unit will

protect you if you observe the following procedures in installing, using and servicing. The present

unit is fully transistorized and does not contain any element that can be repaired by the user.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

15. Repair - If any of the following conditions occurs, unplug the AC cord from the AC outlet, and

request a qualified service person to perform repairs.

a) When the AC cord or plug is damaged.

b) When a liquid was spilled on the product or when objects have fallen into the product.

c) When the product has been exposed to rain or water.

Important Safety Instructions

page2

d) When the product does not operate properly as described in the operating instructions. Do

not touch the controls other than those described in the operating instructions. Improper

adjustment of controls not described in the instructions can cause damage, which often

requires extensive adjustment work by a qualified technician.

e) When the product has been dropped or damaged.

f) When the product displays an abnormal condition. Any noticeable abnormality in the product

indicates that the product needs servicing.

16. Replacement parts - In case the product needs replacement parts, make sure that the service

person uses replacement parts specified by the manufacturer, or those with the same

characteristics and performance as the original parts. Use of unauthorized parts can result in

fire, electric shock and/or other danger.

17. The LCD panel used in this product is made of glass. Therefore, it can be broken when the

product is dropped or gets shock. Be careful not to be injured by glass pieces in case the

panel is broken.

18. The LCD panel is a product of very high technology with 2,949,120 thin film transistors, giving

you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a

fixed blue, green or red point. Please note that this does not affect your product’s performance.

Important Safety Instructions

page3

Make sure the following accessories are provided with the product.

Supplied Accessories

page4

17MD255V

17’’ LCD TV WITH BUILT IN DVD PLAYER

Power adapter

Warranty card

Quick setup guide

AAA batteries

User guide

Remote control

Insert supplied batteries via the battery compartment on the back of the remote control.

Make sure polarity matches the (+) and (-) marks inside the compartment.

Remote Control

page5

Inserting Batteries Into The Remote Control

●Do not expose remote to liquids, direct sunlight or shock.

●The remote control unit may not work properly if the remote sensor window of the Display is

under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display,

or operate the remote control unit closer to the remote sensor window.

Cautions Regarding Remote Control Unit

●Use the remote control by pointing it towards the remote

sensor on the TV. Objects between the remote control and

the sensor may disrupt operation.

●Effective range is 20 feet but is dependant on what your

viewing angle is.

●Range can also be affected by direct sunlight on the TV’s

sensor.

Using The Remote Control Unit

Remote Control

page6

POWER

Use to turn the unit on and off.

Number Buttons

Use to set the channel and to enter

DVD chapter numbers.

CAPTION

Use to select close caption mode.

VOLUME+/-

Use to adjust the volume.

LAST

Press to return to the previous

channel in normal viewing mode.

TV/DVD/AUX/PC

Use to bring up the AV signal source

selection screen and use the /

buttons to select between: TV,

DVD,AV1-Video,AV1-S-Video,AV2-

Component, PC, and press the OK

button to confirm.

SUBTITLE

Use to shift DVD subtitle language.

ANGLE

Use to shift DVD viewing angle.

REPEAT

Use to repeat the DVD playback.

WIDE

In DVD mode, use to set TV

display mode.

SETUP

Use to bring up DVD setup menu.

RETURN

Return to the previous menu

screen.

FF/FR

Use to play DVD fast forward/

backward.

STOP

Use to stop the DVD playback.

DVD MENU

Use to bring up the DVD root

menu.

TV MENU

Use to bring up TV menu; and

exits TV menu by pressing again.

CH+/-

Use to skip to the previous/next

channel.

MUTE

Mute the sound.

AUTO

Auto adjustment for PC signals.

OPEN( )

Use to eject the disc being played

in the disc slot, the main unit must

be set to DVD status.

OSD

Use to bring up the DVD On-

Screen-Display.

MPX

Use to select the sound multiplex

mode. (See page 16.)

PAUSE

Use to pause the DVD playback.

Cursor Buttons

Use to navigate in menus.

Use to confirm your selections.

DVD TITLE

Use to bring up the DVD title menu.

PLAY

Use to begin the DVD playback.

PREV/NEXT

Use to skip to the previous/next

chapter.

ZOOM

Use to zoom the DVD playback

picture.

SLOW

Use to slow the DVD playback speed.

P. MODE

Use to shift DVD play mode.

REMAIN

Use to display the time of the DVD

playback.

A. MODE

Use to shift the DVD playback audio

mode.

AUDIO

Use to shift DVD audio language.

1) REMOTE SENSOR

2) POWER ON INDICATOR

3) STANDBY INDICATOR

4) TV/DVD/AUX/PC: Use to select the AV signal source between: TV, DVD,AV1-Video,AV1-S-Video,AV2-

Component and PC.

5) CH+/-: To skip to the previous/next channel.

6) VOLUME+/-: Use to adjust the volume.

7) POWER BUTTON: Use to turn the unit on and off.

8) DISC SLOT: Insert a DVD or CD disc to play under DVD status.

9) PAUSE: Use to pause the DVD playback.

10) STOP: Use to stop the DVD playback.

11) PLAY: Use to begin the DVD playback.

12) EJECT: Use to eject the disc being played in the disc slot, the main unit must be set to DVD status.

Functional Overview

page7

Front View

STOP

PLAY

EJECT

Slot-load

DVD Player

PAUSE

TV/DVD/AUX/PC

CH CH VOL VOL

123

45 67

PHONES

AUDIO

S-VIDEO

VIDEO

B /

DC IN

VGA

AV1 IN

AUDIO

R /

AUDIO

VIDEO

AV OUT

AV2 IN

PC IN

Rear View

1) AV1 IN (Composite Video,

S-Video and Audio In)

2) AV OUT (Composite Video

and Audio Out)

3) AV2 IN (Component Video and Audio In)

4) PC IN (VGA and Audio)

5) PHONES

6) DC IN (12 Volt)

Connections

page8

Computer

HDTV Receiver

PHONES

AUDIO

S-VIDEO

VIDEO

B /

DC IN

VGA

AV1 IN

AUDIO

R /

AUDIO

VIDEO

AV OUT

AV2 IN

VGA Audio Cable

1. CONNECT TO POWER

a. Connect the mini plug of the AC power

adapter to DC IN jack on the back of the

17MD255V.

b. Connect the power plug of the AC power

adapter to the power socket.

2. SYSTEM CONNECTIONS

a. Using the antenna input: Connect the

antenna terminal from an antenna or

cable/satellite receiver to the antenna input

terminal on the 17MD255V; use the

TV/DVD/AUX/PC button and the /

buttons to set the 17MD255V’s signal source

to "TV".

b. Using the AV1 RCA Video/Audio input:

Connect compatible AV equipment to the

17MD255V through the AV1 IN jacks on

17MD255V (Composite Video and Audio

input jacks); use the TV/DVD/AUX/PC

button and the / buttons to set the

17MD255V’s signal source to "AV1-Video".

c. Using the AV1 S-Video and RCA Audio

input: Connect AV equipment to the

17MD255V through the AV1 IN jacks on

17MD255V (S-Video and Audio input jacks);

use the TV/DVD/AUX/PC button and the

/ buttons to set the 17MD255V s signal

source to AV1-S-Video .

d. Using the AV2 Component input: The AV2

input may be used for Progressive scan or

HDTV inputs; use the TV/DVD/AUX/PC

button and the / buttons to set the

17MD255V’s signal source to "AV2-

Component".

e. Using the VGA connector: Connect a PC

computer to the 17MD255V through the

VGA socket on 17MD255V. The Mini-

plugged next to the VGA input is for audio

associated with this type of signal. Use the

TV/DVD/AUX/PC button and the /

buttons to set the 17MD255V s signal source

to PC-IN . 17MD255V monitor s native

resolution for computer use is 1024x768.

f. Using the AV out, RCA Video/Audio

output: Connect the 17MD255V to another

TV Monitor through the AV OUT jacks on

17MD255V(Composite Video and Audio

output jacks); now you can use the TV

Monitor as an external monitor. Signals from

the Antenna, AV1 and Internal DVD player

will be available at this point.

1. Press POWER button on the front panel to

turn on the TV set. The STANDBY/ON

indicator lights up green.

2. If the STANDBY/ON indicator still lights up

red, press POWER on the remote control

to turn the TV set on.

Basic Operations

page9

Turning On The Power

1. Press POWER on the remote control, the

image on the screen disappears and the

STANDBY/ON indicator changes from

green to red.

NOTE: Small amounts of electric power is still

consumed even when the power is

turned off.

Turning Off The Power

By pressing the TV/DVD/AUX/PC on the TV

set and confirming by the OK button, you can

change the mode as follows:

TV/AV Mode Selection

TV/DVD/AUX/PC

CH CH VOL VOL

POWER

TV/DVD/

AUX/PC

TV DVD AV1-Video

PC AV2-Component AV1-S-Video

Andere Handbücher für 17MD255V

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Magnavox TV-DVD-Kombination Handbücher

Magnavox

Magnavox 32MD251D - 32" Lcd Hd Flat Tv Bedienungsanleitung

Magnavox

Magnavox MWC20T6 Bedienungsanleitung

Magnavox

Magnavox 20MC4204 - Tv/dvd Combination Betriebsanleitung

Magnavox

Magnavox 20MC4206 - Tv/dvd Combination Bedienungsanleitung

Magnavox

Magnavox 37MD359B Bedienungsanleitung

Magnavox

Magnavox MWC24T5 Bedienungsanleitung

Magnavox

Magnavox 20MC4206 - Tv/dvd Combination Bedienungsanleitung

Magnavox

Magnavox 32MD251D - 32" Lcd Hd Flat Tv Montageanleitung

Magnavox

Magnavox 20MC4304 - Tv/dvd/vcr Combination Bedienungsanleitung

Magnavox

Magnavox 27MDTR20 - Tv/dvd/vcr Combination Bedienungsanleitung

Magnavox

Magnavox 26md301b/f7 Bedienungsanleitung

Magnavox

Magnavox 19MD359B - HD Flat Panel LCD/DVD Bedienungsanleitung

Magnavox

Magnavox CD130MW9 Bedienungsanleitung

Magnavox

Magnavox 24MC4306 - Tv/dvd/vcr Combination Bedienungsanleitung

Magnavox

Magnavox 20MC4306 - Tv/dvd/vcr Combination Montageanleitung

Magnavox

Magnavox 19MD301B Benutzerhandbuch

Magnavox

Magnavox 32MD359B - 32" LCD TV Bedienungsanleitung

Magnavox

Magnavox 24MC4306 - Tv/dvd/vcr Combination Montageanleitung

Magnavox

Magnavox 32MD251D - 32" Lcd Hd Flat Tv Bedienungsanleitung

Magnavox

Magnavox 26HD357B User manual. Betriebsanleitung

Magnavox

Magnavox MSD724G Bedienungsanleitung

Magnavox

Magnavox 32MD357B - Hook Up Guide Bedienungsanleitung

Magnavox

Magnavox 19MD358B - 19" LCD TV Bedienungsanleitung

Magnavox

Magnavox 9MDPF20 - Dvd-video Player Bedienungsanleitung

Beliebte TV-DVD-Kombination Handbücher anderer Marken

Memorex

Memorex MVDT2002SM Bedienungsanleitung

Akai

Akai ALED2609TWE Bedienungsanleitung

JVC

JVC LT-32D210 Bedienungsanleitung

Toshiba

Toshiba VTD1432 Bedienungsanleitung

Haier

Haier DTA-2189 Bedienungsanleitung

Philips

Philips DVD 580M Handbuch

RCA

RCA RLEDV2238A-B Bedienungsanleitung

LENCO

LENCO DVT-1933 Bedienungsanleitung

LG KU-17WDVD Bedienungsanleitung

Sylvania

Sylvania SKCR2706BT Bedienungsanleitung

Memorex

Memorex MVDT2002A Bedienungsanleitung

Akura

Akura AXDVD1515W-ID Bedienungsanleitung

Wintal

Wintal 27LDVD05 Bedienungsanleitung

Toshiba

Toshiba 23HLV84 Bedienungsanleitung

AOC

AOC LC19W060C Bedienungsanleitung

iLive

iLive ITDE2288 Bedienungsanleitung

Kogan

Kogan KALED16DVDYA Bedienungsanleitung

Akura

Akura ATLDVD2630W-HDID Bedienungsanleitung