Magnavox VR400BMG Bedienungsanleitung

VCR

VR400BMG

Video Cassette Recorder

Hookup Pages

8 Hookups With a Cable Box / Direct Broadcast System

There are two ways to connect your Cable Box/DBS to the VCR. With this connection:

●You may view any channel.

●You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.

●You may not view a channel other than the one you are recording.

●You may not program channels at the VCR.

●You can only program a timer recording for one channel at a time. Set the TV and the VCR to the

Cable Box/DBS output channel (channel 03 or 04), and set your Cable Box/DBS to the channel you

want to record. When you enter the channel you want to record in a timer recording, select channel 03

or 04 (the Cable Box/DBS output channel). (This is step 7 on page 28.) Leave the Cable Box/DBS on for

a timer recording.

VIDEO

OUT

CH3 CH4

AUDIO

OUT

ANT

OUT

75V

ANT /

CABLE

TV’s

ANTENNA IN

Jack

Cable Box/DBS VCR

Recording/Viewing Any Channel

Connections

With the VCR on and in VCR position (the VCR/TV light will appear on the

display panel), use the CHANNEL o/pbuttons to set the VCR to the

Cable Box/DBS output channel (channel 03 or 04).

Set the TV to the same channel to which you set the VCR. Set the

CH3/CH4 switch on the back of the VCR to the same channel.

Select the channel you want to view/record at the Cable Box/DBS.

Connect a Cable signal to the IN Jack on the Cable Box/DBS.

Use an RF coaxial cable (supplied) to connect the OUT Jack on the Cable

Box/DBS to the ANT(enna) IN Jack on the VCR.

Use a second RF coaxial cable to connect the OUT Jack on the VCR to the

TV’s ANTENNA IN Jack.

Cable

Signal RF coaxial

cable

RF coaxial

cable

Hookups With a Cable Box / Direct Broadcast System (cont’d) 9

VIDEO

OUT

CH3 CH4

AUDIO

OUT

ANT

IN OUT

75V

ANT /

CABLE

With this connection:

●You may watch one channel while recording another.

●You may not record scrambled channels.

Recording One Channel/Watching Another

Put the Cable Box/DBS on the same channel as the

VCR’s CH3/CH4 switch. (Make sure the TV is on the Cable

Box/DBS output channel, 03 or 04.)

Then, with the VCR in VCR position (the VCR/TV light

will appear on the display panel), use the CHANNEL

o/pbuttons to select the channel you want to record at

the VCR. Start the recording.

Press the VCR/TV button once to put the VCR in TV

position. (The VCR/TV light will disappear.)

Select the channel you want to watch at the Cable

Box/DBS.

TV’s ANTENNA

IN Jack

Cable Box/DBS

VCR

• When you play a tape, make sure

the Cable Box/DBS is set to the

same channel as the CH3/CH4

switch on the VCR. Set the TV to

the Cable Box/DBS output channel

(03 or 04).

Helpful Hint

Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

Use an RF coaxial cable (supplied) to connect the OUT Jack on

the VCR to the IN Jack on the Cable Box/DBS.

Use a second RF coaxial cable to connect the OUT Jack on the

Cable Box/DBS to the ANTENNA IN Jack on the TV.

Connections

Cable

Signal RF coaxial

cable

RF coaxial

cable

10 Hookups With a Stereo TV

VIDEO

OUT

CH3 CH4

AUDIO

OUT

ANT

antenna or

cable to

ANT(enna)

IN Jack

Video Cable

Audio Cable

VIDEO (yellow) and

AUDIO (white) OUT Jacks

Audio and Video

IN Jacks on TV

●Audio and Video cables are not supplied.

Connect the antenna or cable to the ANT(enna) IN Jack

on the back of the VCR.

Connect a video cable to the yellow VIDEO OUT Jack on

the back of the VCR. Then, connect the other end of the

video cable to the VIDEO IN Jack on your TV.

Connect an audio cable to the white AUDIO OUT Jack

on the back of the VCR. Then, connect the other end of

the audio cable to the AUDIO IN Jack on your TV.

(If your TV has Right and Left AUDIO IN Jacks, you must use a

“Y” splitter audio cable as illustrated to deliver audio to the TV’s

right and left channels.)

Turn on your TV, making sure it is in Line Input mode. Please

refer to your TV owner’s manual for details.

• This hookup will not give you stereo

sound. To get stereo sound, use the

connections on pages six-seven and

select the channel to be viewed at

the TV (with the VCR turned off).

Helpful Hint

VCR/TV Button

Use to select the signal that

your TV receives.

●VCR Position

Use to watch a tape, to

watch a program while

recording it, or to watch a

TV broadcast using the

CHANNEL o/por Number

buttons to change channels at

the VCR. The VCR/TV light

will appear when the VCR is

in VCR position.

●TV Position

Use to watch TV (changing

channels at the TV) or to

watch one program while

recording another.

Details are

on page 32.

Front Panel 21

PAUSE Button

While recording, press to temporarily stop the recording. Press a second time to resume normal

recording. Details are on page 24. You can not pause a One-Touch Recording. Details are on page

25. During tape playback, press to freeze the picture. Press repeatedly to advance the still picture

frame by frame. Details are on page 35.

POWER Button

Press to turn the VCR

power on and off.

REC(ord)/OTR Button

Press once to start a recording. Details are on page 24. Press repeatedly to start a One-

Touch Recording (an immediate recording, 30 minutes to eight hours long) of the channel

you are watching. Details are on page 25.

CHANNEL o/pButtons

Press to scan up or down through the VCR’s channels.

TRACKING Function

During normal tape playback or slow motion tape playback, press the

CHANNEL o/pbuttons to adjust the tracking. Details are on page 41.

PLAY Button

Press to play a tape. Also, press to release Slow,

Search, or Still mode and return to normal play-

back. Details are on page 35.

Press to select an item in the VCR menu.

REW(ind) Button

When tape playback is stopped, press to rewind

the tape at high speed. During tape playback,

press to rewind the tape while the picture stays

on the screen. Details are on page 35. Press to go

back one step when setting the clock or a timer

recording.

STOP/EJECT Button

Press once to stop the tape. When tape

playback is stopped, press to eject the tape.

Press to select an item in the VCR menu.

F.FWD (Fast Forward) Button

When tape playback is stopped, press to fast forward the

tape at high speed. During tape playback, press to fast for-

ward the tape while the picture stays on the screen. Details

are on page 35. Press to select an item in the VCR menu.

POWER VCR/TV SPEED

CST.IN

CHANNEL MENU

PLAY

REW

REC/OTR

STOP/EJECT

PAUSE

F.FWD

VCR/TVPOWER RECTIMER

Remote Sensor

Receives a signal from your remote

control so you can operate your VCR

from a distance.

MENU Button

Press repeatedly to access menus or to remove menus.

SPEED Button

Press to select the recording speed

(SP or SLP). Details are on pages 24

and 44.

AUDIO IN Jack

Connect a cable coming from the

audio out jack of a camcorder,

another VCR, or an audio source

here. Details are on page 33.

VIDEO IN Jack

Connect a cable coming from

the video out jack of a cam-

corder, another VCR, or an

audio-visual source (laser disc

player, video disc player, etc.)

here. Details are on page 33.

ANT(enna) IN Jack

Connect your antenna or cable

here. Details are on pages six-10.

CH3/CH4 Switch

Set to channel 3 or 4

to use your TV with

your VCR. Set your

TV to the same chan-

nel. Details are on page

seven.

OUT Jack

Use the supplied RF coax-

ial cable to connect this

jack to the Antenna In

Jack on your TV or Cable

Box/DBS. Details are on

pages six-nine.

VIDEO OUT Jack

Connect a cable going to the video

in jack of a camcorder, another

VCR, or an audio-visual system

(laser disc player, video disc player,

etc.) here. Details are on page 33.

AC Power Cord

Connect to a standard AC outlet

to supply power to the VCR.

AUDIO OUT Jack

Connect a cable going to the

audio in jack of a camcorder,

another VCR, or an audio system

here. Details are on page 33.

VIDEO

OUT

CH3 CH4

AUDIO

OUT

ANT

22 Rear Panel

VCR 1 will play your tape. Insert a prerecorded tape in

VCR 1. If the tape does not have a record tab, playback begins. If

this happens, press the STOP/EJECT button on VCR 1 once.

Rerecording (Tape Duplication) 33

VCR 2 will record your tape. Insert a blank tape in VCR 2.

Make sure the record tab is intact (details are on page five). Make

sure the VCR 2 power is on and VCR 2 is in VCR position. (The

VCR/TV light will appear. If it does not, press the VCR/TV button

once.)

Turn on the TV and set it to channel 3 or 4, whichever

channel the CH3/CH4 switch on VCR 2 is set to.

Point the remote control at VCR 2. Press the Number

buttons 0, 0. LineIn Rear (L1) will appear on the screen.

Point the remote control at VCR 2. Use the SPEED but-

ton to select SP or SLP.

Press the PLAY button on VCR 1 and the REC(ord)/OTR

button on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR

2 once, then stop the tape on VCR 1.

• Unauthorized recording of copy-

righted television programs, video

tapes, or other materials may

infringe on the rights of copyright

owners and violate copyright laws.

• If a program has copyright protec-

tion, it may not record clearly.

• Audio and video cables are not sup-

plied.

• The illustration uses two VCRs just

like yours. Different VCRs may oper-

ate differently.

• When LineIn Rear (L1) appears on

the screen, the screen will be blue.

Helpful Hints

VIDEO

OUT

CH3 CH4

AUDIO

OUT

ANT

VIDEO

OUT

CH3 CH4

AUDIO

OUT

ANT

VCR 1

Playing VCR VCR 2 - Recording VCR

1. Audio cable from AUDIO OUT Jack of

VCR 1 to AUDIO IN Jack of VCR 2

2. Video cable from VIDEO OUT Jack

of VCR 1 to VIDEO IN Jack of VCR 2

3. RF coaxial

cable from the

OUT jack of

VCR2 to the TV’s

ANTENNA IN

Jack

Andere Handbücher für VR400BMG

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Magnavox Videorecorder-System Handbücher

Magnavox

Magnavox VRU262AT Bedienungsanleitung

Magnavox

Magnavox VRA641AT99 Bedienungsanleitung

Magnavox

Magnavox VRT344 Bedienungsanleitung

Magnavox

Magnavox VR401BMX Technisches Dokument

Magnavox

Magnavox VR601BMX Bedienungsanleitung

Magnavox

Magnavox CMWV405 Bedienungsanleitung

Magnavox

Magnavox VRU662AT Bedienungsanleitung

Magnavox

Magnavox VR9622AT01 Bedienungsanleitung

Magnavox

Magnavox VPA115BL Bedienungsanleitung

Magnavox

Magnavox VRU442AT - 4 Hd Vcr Bedienungsanleitung

Magnavox

Magnavox VR9720AT01 Bedienungsanleitung

Magnavox

Magnavox VRU562AT Bedienungsanleitung

Magnavox

Magnavox MCV604 Bedienungsanleitung

Magnavox

Magnavox VR601BMG Bedienungsanleitung

Magnavox

Magnavox VRU242AT Bedienungsanleitung

Magnavox

Magnavox MVR450MG - Vcr Mono Bedienungsanleitung

Magnavox

Magnavox MVR430MG - Vcr Mono Betriebsanleitung

Magnavox

Magnavox VR401BMG Gebrauchsanweisung

Magnavox

Magnavox VR401BMG Bedienungsanleitung

Magnavox

Magnavox VRU362AT Bedienungsanleitung

Magnavox

Magnavox VRT245A Bedienungsanleitung

Magnavox

Magnavox MVR440MG/17 Betriebsanleitung

Magnavox

Magnavox VR3440 Bedienungsanleitung

Magnavox

Magnavox CDV220MW9 Bedienungsanleitung

Beliebte Videorecorder-System Handbücher anderer Marken

Toshiba

Toshiba M-662 Bedienungsanleitung

Sony

Sony GV-500 Primary Bedienungsanleitung

JVC

JVC HR-J282EU Bedienungsanleitung

Sony

Sony HDCAM-SR SRW5800 Bedienungsanleitung

Sony

Sony HVR-M10C Bedienungsanleitung

RCA

RCA VR634HF - Hi-Fi VCR Bedienungsanleitung

JVC

JVC HR-5910U Bedienungsanleitung

Panasonic

Panasonic ProLine AG-1320 Bedienungsanleitung

JVC

JVC HR-S8600EU Bedienungsanleitung

JVC

JVC HR-FS1U Bedienungsanleitung

Sharp

Sharp VC-H9888U Bedienungsanleitung

FUNAI

FUNAI LC-950 Bedienungsanleitung

Sharp

Sharp VC-S2000GM Bedienungsanleitung

Sony

Sony Video8 EV-A60 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-V4523S Bedienungsanleitung

Aiwa

Aiwa HV-E212 Bedienungsanleitung

JVC

JVC HR-J3006UM Bedienungsanleitung

GE VG4271 Bedienungsanleitung