IMPULSE®•G+/VG+ Series 4 24 V Power Supply Installation Manual - November 2011
1-2
1. Preface and Safety
Magnetek manufactures products used as components in a wide variety of industrial systems and
equipment. The selection and application of Magnetek products remain the responsibility of the
equipment manufacturer or end user. Magnetek accepts no responsibility for the way its products are
incorporated into the final system design. Under no circumstances should any Magnetek product be
incorporated into any product or design as the exclusive or sole safety control. Without exception, all
controls should be designed to detect faults dynamically and fail safely under all circumstances. All
systems or equipment designed to incorporate a product manufactured by Magnetek must be
supplied to the end user with appropriate warnings and instructions as to the safe use and operation
of that part. Any warnings provided by Magnetek must be promptly provided to the end user.
Magnetek offers an express warranty only as to the quality of its products in conforming to standards
and specifications published in the Magnetek manual. NO OTHER WARRANTY, EXPRESS OR
IMPLIED, IS OFFERED. Magnetek assumes no liability for any personal injury, property damage,
losses, or claims arising from misapplication of its products.
Applicable Documentation
The following manuals are available for the option:
24 V Power Supply Option
MPULSE•G+/VG+ Series 4 Drive
IMPULSE®•G+/VG+ Series 4
Option 24 V Power Supply
Installation Manual
Manual No: 144-23928
Read this manual first.
The installation manual is
packaged with the option and
contains information required to
install the option and set up
related drive parameters.
IMPULSE®•G+/VG+ Series 4
Instruction Manual
The drive manuals cover basic
installation, wiring, operation
procedures, functions, troubleshooting,
and maintenance information. The
manuals also include important
information about parameter settings
and drive tuning.
Access http://www.magnetekmh.com
to obtain Magnetek instruction
manuals.
