Magnimage LED-FW16-B Bedienungsanleitung
LED-FW16-B
Video Control Server
User Manual V1.0
△
!
Document Version：V1.0 Document Release Date：2023/10/20
Before using this LED video processor, please
read this instruction manual carefully and keep it
for future reference.
LED-FW16-B
Statement
Without the written permission of the company, no unit or individual may
copy, transcribe or translate part or all of the contents of this manual.This
manual shall not be distributed in any form or by any means
(electronic,mechanical, photocopying, recording or other possible means) for
commercial or commercial purposes.
The product specifications and information mentioned in this manual are
for reference only and are subject to update without notice. Unless otherwise
agreed, this manual is only used as a guide, and all statements, information,
etc. in this manual do not constitute any form of guarantee.
Revision History
Version
Revise Date
Revised Content
V1.0
2023-10-20
First release
1
Directory
Statement ......................................................................................................................................1
Introduction ..................................................................................................................................2
Trademark Credit..................................................................................................................................................................... 2
About the software................................................................................................................................................................. 2
Product Features......................................................................................................................................................................3
Port Extension...........................................................................................................................................................................4
Safety Notice............................................................................................................................................................................. 5
Features .........................................................................................................................................6
Overview ..................................................................................................................................................................................... 6
Technical Specifications...................................................................................................................................................... 10
Use Menu .................................................................................................................................... 12
How to use the buttons...................................................................................................................................................... 12
MENU Area： .............................................................................................................................................................. 12
LAYER Area：...............................................................................................................................................................13
INPUT Area：.............................................................................................................................................................. 14
FUNCTION Area：..................................................................................................................................................... 14
Introduction to Default State............................................................................................................................................15
Main Menu Introduction .................................................................................................................................................... 16
Main Menu...................................................................................................................................................................17
LED SCREEN CFG........................................................................................................................................................17
INPUT.............................................................................................................................................................................21
LAYERS...........................................................................................................................................................................25
PICTURE.........................................................................................................................................................................27
BACKUP......................................................................................................................................................................... 28
PRESETS.........................................................................................................................................................................31
MISC............................................................................................................................................................................... 33
LANGUAGE/语言.........................................................................................................................................................38
Warranty ..................................................................................................................................... 39
Machine Warranty Period ...................................................................................................................................................39
Non Warranty......................................................................................................................................................................... 39
2
Introduction
Thank you for purchasing our company's LED all-in-one video controller.
Hope you can enjoy the excellent performance of this product. The design of
this LED all-in-one video controller complies with international and industry
standards, but improper operation may still cause personal injury and
property damage. In order to avoid the possible dangers caused by the
equipment, and to benefit from your equipment as much as possible, please
follow the relevant instructions in this manual when installing and operating
the product.
Trademark Credit
VESA is a trademark of the Video Electronics Standards Association.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Even if the company or product trademark is not specifically stated, the
trademark has been fully recognized.
About the software
It is illegal to modify, decompile, disassemble, decrypt or reverse engineer
to the software installed on this product.
3
Product Features
Standard multiple input interfaces：HDMI2.0×1、DP1.2×1 、DVI×2、12G
SDI×1；Support for expansion：DVI×2 or HDMI2.0+DP1.2
Support HDMI loop
Support for zoom and image capture functions
Support quick light-up screen, no need computer software connection
Support single input port 4K×2K/60Hz(HDMI2.0) or 8K×1K/60Hz(DP1.2)
resolution
Support window size & position adjustment and image crop
Support four-layer full screen
Support seamless switching between input signals and presets
Support for input/output resolution
Single network port standard load 0.98 million pixels，a single machine
can carry maximum width 16380 pixels and maximum height 7680 pixels
Support template save and load
Support connection to MAGNIMAGE C-Link series receiver cards
Support quick layer layout templet
Support local USB flash drive for reading and loading configuration files
Support monitor output
Support free cable connecting
Support multi-machine grouping backup, enabling the entire main
system to synchronously switch to the backup system
Support single machine network port backup and multi-machine
network port backup
Support receiving card serial number calibration, switch on the
intelligent serial number to visually check the position of the box
Support the debug network port comes with its own ring out, which
eliminates the need for routers to form a local area network, make it
convenient for multi machine cascading debug
Support single machine multi input splicing and multi machine splicing
4
Support RS232 central control
Support fiber input and fiber backup
Support scrolling subtitle function
Support time task function
Support for output freezing
Support button lock
Port Extension
LED-FW16-Bis basic model number，we can extend Input Source on the
basis of basic model. Extension model are as follows:
Available Expansion Modules
Product Model
Input
module
Expand 2 external DVI input module
LED-FW16-BD
Expand 1 external HDMI2.0 and 1 external DP1.2
input module
LED-FW16-BH
5
Safety Notice
The input voltage range of the power supply of this product is 100~240V,
50/60Hz, please use the correct power supply.
When you want to connect or unplug any signal cable or control cable,
please make sure that all power cables have been unplugged beforehand.
When you want to add hardware devices to this product or remove
hardware devices from this product, please make sure that all signal
cables and power cables have been unplugged in advance.
Before performing any hardware operations, power off the LED video
processor and discharge static electricity from your body by touching a
grounded surface.
Please use it in a clean, dry and ventilated environment, and do not use
this product in a high temperature, humid environment.
This product is an electronic product, please keep it away from fire, water
and flammable and explosive dangerous goods.
There are high-voltage components in this product, please do not open
the case or repair the device by yourself.
If you find any abnormality such as smoke or odor, please Function off the
power switch immediately and contact the dealer.
6
Features
Overview
The video control server is a video controller created by Magnimage,
which integrates video processing, splicing, switching and LED screen sending
card functions. This series integrates various professional input interfaces,
supports up to 4K×2K/60Hz or 8K×1K/60Hz, LED-FW16-B single machine can
load 10.40 million pixels, with bandwidth expansion enabled, a single machine
can load up to 15.68 million pixels, and support 16 Gigabit Ethernet ports for
output. can be used with the company's support to connect Magnimage
C-Link series receiving cards.
The load capacity of all-in-one video controller is twice of the ordinary
all-in-one video controller, and supports EDID management and customize
output resolution, single controller output max width can be 16380 pixel, up
to 120HZ refresh rate. Greatly improved the utilization of output bandwidth.
The output image can be scaled point by point according to the actual size of
the LED display.
Complete video input interface, including: DVI×2、DP1.2×1、HDMI2.0×1、
12G SDI×1、HDMI loop-out×1，and can also extend DVI×2 or HDMI2.0+DP1.2.
And it supports network, square port USB and RS232 serial port control,
which is convenient for interconnection and control with a variety of video
equipment.
7
Front Panel
TEMPLATE
FULL SCREEN
LAYER 4
LAYER 3
LAYER 2
LAYER 1
OK
Rotary knob
Button Description
Quickly call up the template button
One click full screen button
Layer4
Layer3
Layer2
Layer1
Return button, return to the previous menu
In the default state, the menu is called out, and
the menu status is the confirm button
select menu items and adjust parameters
INPUT 9/9
INPUT 8/8
INPUT 7/7
INPUT 6/6
INPUT 5/5
INPUT 4/4
INPUT 3/3
INPUT 2/2
INPUT 1/1
View input signal source/number button 9
OPTICAL/Number button 8
SDI-12G/Number button 7
DP1/Number button 6
HDMI1/Number button 5
DVI4/Number button 4
DVI3/Number button 3
DVI2/Number button 2
DVI1/Number button 1
8
SAVE PRESET
SIZE
MAPPING
FREEZE
TEST PATERN
LED CONFIG
CROP
EDID
ZOOM/0
Save preset shortcut button
Layer size button
Smart sequence button
Freeze button
Test chart card button
LED screen configuration button
Signal crop button
EDID edit button
Layer zoom button/number button 0
LOCK
LOAD PRESET
BLACK
BRIGHT
buttonboard lock button
Preset load button
One click black screen button
Brightness adjust button
Inhaltsverzeichnis
Andere Magnimage Server Handbücher
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung