Magnum MFM-PS Technisches Datenblatt
Product instruction manual
Magnum® MFM-PS Folding System
Magnum Folders have been designed to be user friendly,
however we strongly recommend you take a few minutes
to read through this manual to ensure correct operation.
Keep this manual safe for future reference.
2
Page 2 - Specications
Page 3 - Introduction
Page 4 - Safety Instructions and environmental requirements
Page 5 - Information before use
Page 6 - Parts
Page 8 - How to use
Pages 16 & 17 - Fine Adjustments
Page 22 - Warranty and incorrect use
Contents
Paper Size A3
Paper Weight Up to 220gsm single folding, up to 135gsm multiple folding
Paper Quality Woody paper, high-quality paper, high-quality paper for stencil printing,
medium-quality paper
Fold Type Single, Double parallel, Letter, Gate, Zig-Zag, Fold-out
Paper Feed system Three-roller friction feed system
Max. Stacking Capacity 500 sheets (64m2)
Folding Speed 50-200 sheets per minute
Operating Method Digital key input
Dimensions 610 x 580 x 450mm
Gross Weight 33Kg
Specications
3
Thank you for purchasing the Magnum MFM-PS Folding System.
This system enables users to achieve greater eciency in clerical work by releasing
them from paper-folding work that has manually been performed in the past.
Please read these instructions carefully before starting to use the system to ensure you
get the best results and are competent at operation.
Should you experience any problems please contact us your supplier.
Introduction
4
Safety Instructions
• Make sure that the system is electrically grounded. This prevents an electric shock when there is a leak
of electricity.
• Use the system at 110 – 120 VAC, 220 – 240 VAC with a frequency of 50Hz to 60Hz. A re may start or
the system may break down if a higher or lower voltage is used, or if an electric current with a
frequency that is not within the range of frequency stated above.
• Do not place any objects on this system. A re may start or electricity may leak if water or a foreign
object enters the system.
• Handle the power cord with care. A re may start or an electric shock may be caused if the cord is
damaged, broken, or processed, if a heavy object is placed on the cord, or if the cord is bent forcibly.
• Do not pull the power plug out of or put it in the electric outlet using a wet hand.
Otherwise, an electric shock may be caused.
• Do not remove the cover of this system. Otherwise, an electric shock or injury may be caused.
• Do not remodel this system. Otherwise, a re may break out or an electric shock may be caused.
• If the system is used when it is in an abnormal condition, such as generating heat, emitting smoke,
and giving out a strange smell, a re may break out or an electric shock may be caused. Turn o the
power switch immediately and then pull the power plug out of the electric outlet. Afterwards, report
the fault to your supplier.
• If abnormalities such as the power cord generating heat and giving out a strange smell are found,
turn o the power switch immediately and then pull the power plug out of the electric outlet.
Afterwards, report the fault to your supplier.
• If a foreign object enters the system, turn o the power switch rst and then pull the power plug out
of the electric outlet. Afterwards, report the fault to your supplier.
• If thunder approaches, pull the power cord out of the electric outlet to prevent a re or breakdown
caused by the falling of a thunderbolt.
• Do not let hairs, a necktie or necklace hang above the drive of the system.
Doing so may cause an injury.
• Do not put the system on an unstable place such as a shaky stand or a slanted oor. Doing so may
cause the system to drop or fall down, causing an injury.
• Do not put the system in a moist or dusty place. Doing so may start a re or cause an electric shock.
• Be sure to pull out the power cord while holding the plug. If the power plug is pulled out while
holding the cord, a re may break out or an electric shock may be caused.
• Be sure to pull the power plug out of the electric outlet rst when moving this system.
Otherwise, the cord may be damaged, causing a re or an electric shock.
• Be sure to pull the power plug out of the electric outlet for safety purposes when this system is not
used for consecutive holidays or for other reasons.
5
Check accessories immediately after unpacking. Should an item be missing, contact your supplier.
Also, check if the warranty has the dealer’s signature and the date of purchase is mentioned.
Accessory Quantity
Table A 1
Table B 1
Power Cable 1
Roller 2
Instruction Manual 1
Information Before Use
1. Precautions on Installation
Do not install it in an unstable place such as on a faltering bench or an inclined place.
It may fall down or drop and cause an injury.
Do not install it in a dusty place or a place of high humidity.
It may cause a re, or an electric shock.
Do not install it in a place exposed to direct sunlight.
Avoid a location near a window.
It should be used at an ambient temperature of 5 to 35°C
Do not install it in a location close to heating equipment.
Do not install it in a place exposed to a direct wind.
2. Checking Accessories
i
6
Parts
Number Name Number Name
(1) Roller cover (10) Control panel
(2) Left side cover (11) Right side cover
(3) Paper feed roller (12) Table B
(4) Paper guide (13) Paper feed table lever
(5) Feed table (14) Table A socket
(6) Auxiliary feed table (15) Table B socket
(7) Paper ejection roller (16) Power switch
(8) Paper stacking table (17) Power lead socket
(9) Table A
7
Operation Panel and Functions
No. Designation/Indication Function
(1) Speed adjustment key Used for adjusting the speed.
(2) Store key Select memory 1/2 stored folding position and the folding
position after adjustment is stored.
(3) Memory 1/2 lamp Two special folding types are stored.
(4) Select key Used for selecting paper length, the feed position of table A and B,
indicating of the counter when lights are o.
(5) Paper length input mode lamp It is on when paper length is input, if non-standard size paper,
press CLEAR/RESET, input correct paper length.
(6) Table A stopper lamp Lights when the position of stopper of table A can be adjusted.
(7) Table B stopper lamp Lights when the position of stopper of table B can be adjusted.
(8) +/- key Used for adjusting the position of the stopper of table A and B.
(9) Fold type key Six folding types & six types of paper can be selected and stored.
(10) Numerical key 1 Used for inputting the reduced number for subtraction counting
and the length of non-standard size paper.
(11) Counter Shows the number of sheets, the position of the stopper pin of
table A and B, and paper size.
(12) Clear/Reset key Clears counter indication and resets error. When the paper length
lamp is on, press this key, can input non-standard size paper.
(13) Test key Test fold one sheet (stopper of table A and B move to the position).
(14) Start/Stop key Starts and stops the system.
(15) Status lamp Lights when paper stock runs short, or indicates the location
when feed trouble occurs.
8
How to Use
1. Preparation
(1) Install the rollers
9
(2) Install table A and B, before starting the system
1. Position of Table A’s notch and
connector.
2. Insert the front notched part of Table A
into the stud (1) of the system and drop
its rear notched part on the stud (2).
Insert the plug into the connector (3).
3. Position of Table B’s notch and
connector. 4. Insert the front notched part of Table
2 into the stud (4) of the system
and drop its rear notched part on the
and drop its rear notched part on the
connector (6).
5. Extend the paper stacking table to
required length. 6. Insert the power cord into the
adapter and set it while lifting the
auxiliary table.
10
2. Indication of the counter
(1) Addition counter
When the three lamps are o, the number
indicates the counter. Press start/stop key
after choosing the fold type, it automatically
counts the folded paper.
Press the Clear/Reset key and reset the
number at zero (0).
When the three lamps are o, the number
indicates the counter. Input the desired
number using the Numerical keys.
(40 is input in this case)
Subtraction Mode Lamp will light. Press
start/stop key after choosing the fold type.
The number on the counter decrease by one
each time a sheet of paper is folded. When
the number is nished, the counter will
return to the desired number again.
Press the Select key, Paper length input
mode lamp is on, press Clear/Reset key.
Input the paper length using the Numerical
keys (300mm is input in this case, micro
meter can be input after decimal point).
Press store key, and store under 1 or 2
memory indication.
(2) Subtraction counter
(3) Input non-standard size paper length
Inhaltsverzeichnis
Andere Magnum Faltmaschine Handbücher
Beliebte Faltmaschine Handbücher anderer Marken
Mathias Bauerle
Mathias Bauerle Multipli 35 Bedienungsanleitung
Intelli-Fold
Intelli-Fold DF-304C Bedienungsanleitung
Pitney Bowes
Pitney Bowes DI425 FastPac Handbuch
Hwasung
Hwasung COMPODIS HMK-830 Series Bedienungsanleitung
KRUG+PRIESTER
KRUG+PRIESTER IDEAL 8306 Bedienungsanleitung
XPOtool
XPOtool 61574 Bedienungsanleitung
