Magtek DynaProx Bedienungsanleitung

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350

www.magtek.com

DynaProx

EMV Contactless/NFC Card Reader

Installation and Operation Manual

July 2022

Document Number:

D998200490-11

REGISTERED TO ISO 9001:2015

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 2 of 57 (D998200490-11)

Printed in the United States of America

INFORMATION IN THIS PUBLICATION IS SUBJECT TO CHANGE WITHOUT NOTICE AND

MAY CONTAIN TECHNICAL INACCURACIES OR GRAPHICAL DISCREPANCIES. CHANGES

OR IMPROVEMENTS MADE TO THIS PRODUCT WILL BE UPDATED IN THE NEXT

PUBLICATION RELEASE. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR

TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, FOR

ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MAGTEK, INC. SOME

FEATURES AND FUNCTIONS MAY BE DOCUMENTED, BUT NOT AVAILABLE WITH THE

CURRENT RELEASE OF THE PRODUCT. PLEASE CONTACT YOUR MAGTEK

REPRESENTATIVE FOR QUESTIONS ABOUT SPECIFIC FEATURES AND FUNCTIONS AND

WHEN THEY ARE SCHEDULED TO BECOME AVAILABLE.

MagTek®, MagnePrint®, and MagneSafe® are registered trademarks of MagTek, Inc.

Magensa™ is a trademark of MagTek, Inc.

AAMVA™ is a trademark of AAMVA.

American Express® and EXPRESSPAY FROM AMERICAN EXPRESS® are registered trademarks of

American Express Marketing & Development Corp.

D-PAYMENT APPLICATION SPECIFICATION® is a registered trademark to Discover Financial

Services CORPORATION

MasterCard® is a registered trademark and PayPass™and Tap & Go™are trademarks of MasterCard

International Incorporated.

Visa® and Visa payWave® are registered trademarks of Visa International Service Association.

ANSI®, the ANSI logo, and numerous other identifiers containing "ANSI" are registered trademarks,

service marks, and accreditation marks of the American National Standards Institute (ANSI).

ISO® is a registered trademark of the International Organization for Standardization.

UL™and the UL logo are trademarks of UL LLC.

PCI Security Standards Council® is a registered trademark of the PCI Security Standards Council, LLC.

EMV® is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere.

The EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four

graduating arcs, is a trademark owned by and used with permission of EMVCo, LLC.

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 3 of 57 (D998200490-11)

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any

use of such marks by MagTek is under license.

Google Play™ store, Google Wallet™ payment service, and Android™ platform are trademarks of

Google Inc.

Apple Pay®, iPhone®, iPod®, Mac®, and OS X® are registered trademarks of Apple Inc., registered in

the U.S. and other countries. iPad™ is a trademark of Apple. Inc. App StoreSM is a service mark of

Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of

Cisco in the U.S. and other countries and is used by Apple Inc. under license.

Microsoft®, Windows®, and .NET® are registered trademarks of Microsoft Corporation.

All other system names and product names are the property of their respective owners.

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 4 of 57 (D998200490-11)

Table 0-1 - Revisions

Rev Number

Date

Notes

June 1, 2022

Initial release

July 13, 2022

Replaced the word “Plain” with the word “Plane”.

Changed - Operating Temperature to:

DynaProx: -22°F to 185°F (-30°C to 85°C) –DynaProx BCR: -

4F to 131°F (-20°C to 55°C)

Changed Storage Temperature to:

DynaProx: -30°C to 85°C (-22°F to 185°F) –DynaProx BCR: -

30°C to 70°C (-22°F to 158°F)

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 5 of 57 (D998200490-11)

LIMITED WARRANTY

MagTek warrants that the products sold pursuant to this Agreement will perform in accordance with

MagTek’s published specifications. This warranty shall be provided only for a period of one year from

the date of the shipment of the product from MagTek (the “Warranty Period”). This warranty shall apply

only to the “Buyer” (the original purchaser, unless that entity resells the product as authorized by

MagTek, in which event this warranty shall apply only to the first repurchaser).

During the Warranty Period, should this product fail to conform to MagTek’s specifications, MagTek

will, at its option, repair or replace this product at no additional charge except as set forth below. Repair

parts and replacement products will be furnished on an exchange basis and will be either reconditioned or

new. All replaced parts and products become the property of MagTek. This limited warranty does not

include service to repair damage to the product resulting from accident, disaster, unreasonable use,

misuse, abuse, negligence, or modification of the product not authorized by MagTek. MagTek reserves

the right to examine the alleged defective goods to determine whether the warranty is applicable.

Without limiting the generality of the foregoing, MagTek specifically disclaims any liability or warranty

for goods resold in other than MagTek’s original packages, and for goods modified, altered, or treated

without authorization by MagTek.

Service may be obtained by delivering the product during the warranty period to MagTek (1710 Apollo

Court, Seal Beach, CA 90740). If this product is delivered by mail or by an equivalent shipping carrier,

the customer agrees to insure the product or assume the risk of loss or damage in transit, to prepay

shipping charges to the warranty service location, and to use the original shipping container or equivalent.

MagTek will return the product, prepaid, via a three (3) day shipping service. A Return Material

Authorization (“RMA”) number must accompany all returns. Buyers may obtain an RMA number by

contacting MagTek Support Services at (888) 624-8350.

EACH BUYER UNDERSTANDS THAT THIS MAGTEK PRODUCT IS

OFFERED AS-IS. MAGTEK MAKES NO OTHER WARRANTY, EXPRESS OR

IMPLIED, AND MAGTEK DISCLAIMS ANY WARRANTY OF ANY OTHER

KIND, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE.

IF THIS PRODUCT DOES NOT CONFORM TO MAGTEK’S

SPECIFICATIONS, THE SOLE REMEDY SHALL BE REPAIR OR

REPLACEMENT AS PROVIDED ABOVE. MAGTEK’S LIABILITY, IF ANY,

SHALL IN NO EVENT EXCEED THE TOTAL AMOUNT PAID TO MAGTEK

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 6 of 57 (D998200490-11)

UNDER THIS AGREEMENT. IN NO EVENT WILL MAGTEK BE LIABLE TO

THE BUYER FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST

SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OF, OR INABILITY TO USE, SUCH PRODUCT,

EVEN IF MAGTEK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 7 of 57 (D998200490-11)

LIMITATION ON LIABILITY

EXCEPT AS PROVIDED IN THE SECTIONS RELATING TO MAGTEK’S LIMITED WARRANTY,

MAGTEK’S LIABILITY UNDER THIS AGREEMENT IS LIMITED TO THE CONTRACT PRICE OF

THIS PRODUCT.

MAGTEK MAKES NO OTHER WARRANTIES WITH RESPECT TO THE PRODUCT, EXPRESSED

OR IMPLIED, EXCEPT AS MAY BE STATED IN THIS AGREEMENT, AND MAGTEK

DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING WITHOUT LIMITATION ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

MAGTEK SHALL NOT BE LIABLE FOR CONTINGENT, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES TO PERSONS OR PROPERTY. MAGTEK FURTHER LIMITS ITS LIABILITY OF ANY

KIND WITH RESPECT TO THE PRODUCT, INCLUDING NEGLIGENCE ON ITS PART, TO THE

CONTRACT PRICE FOR THE GOODS.

MAGTEK’S SOLE LIABILITY AND BUYER’S EXCLUSIVE REMEDIES ARE STATED IN THIS

SECTION AND IN THE SECTION RELATING TO MAGTEK’S LIMITED WARRANTY.

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 8 of 57 (D998200490-11)

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must accept any

interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by MagTek could void the

user’s authority to operate this equipment.

CANADIAN DECLARATION OF CONFORMITY

This digital apparatus does not exceed the Class B limits for radio noise from digital apparatus set out in

the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux

appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté

par le ministère des Communications du Canada.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 9 of 57 (D998200490-11)

INNOVATION, SCIENCE AND ECONOMIC

DEVELOPMENT CANADA (ISED)

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) This device may not cause interference, and (2) This device must accept

any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux conditions suivantes: (1) L'appareil ne doit pas produire de

brouillage, et (2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

CE STANDARDS

Testing for compliance with CE requirements was performed by an independent laboratory. The unit

under test was found compliant with standards established for Class B devices.

EU STATEMENT

Hereby, MagTek Inc. declares that the radio equipment types Wideband Transmission System (802.11

wireless and Bluetooth Low Energy), and Non-Specific Short Range Device (contactless) are in

compliance with Directive 2014/53/EU. The full text of the EU declarations of conformity is available

at the following internet address:

https://www.magtek.com/Content/DocumentationFiles/D998200505.pdf

UKCA STANDARDS

Hereby, MagTek Inc. declares that the radio equipment types Wideband Transmission System

(Wireless LAN and Bluetooth Low Energy), and Non-Specific Short Range Device (contactless) are in

compliance with Radio Equipment Regulations 2017 Directive S.I.2017:1206. The full text of the

UKCA declarations of conformity is available at the following internet addresses:

•https://www.magtek.com/Content/DocumentationFiles/D998200506.pdf

AUSTRALIA / NEW ZEALAND STATEMENT

Testing for compliance with AS/NZS standards was performed by a registered and accredited laboratory.

The unit under test was found compliant with standards established under AS/NZS CISPR 32 (2013),

AS/NZS 4268 Table 1, Row 59 DTS 2400-2483MHz SRD (802.11), and AS/NZS 4268 (2017) Table 1,

Row 43 13.553-13.567MHz (contactless reader).

UL/CSA/IEC

This product is recognized per UL/CSA/IEC 62368-1, 2nd edition

DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual

Page 10 of 57 (D998200490-11)

ROHS STATEMENT

When ordered as RoHS compliant, this product meets the Electrical and Electronic Equipment (EEE)

Reduction of Hazardous Substances (RoHS) Directive (EU) 2015/863 amending Annex II to Directive

2011/65/EU. The marking is clearly recognizable, either as written words like “Pb-free,” “lead-free,” or

as another clear symbol ( ).

PCI STATEMENT

PCI Security Standards Council, LLC (“PCI SSC”) has approved this PTS POI device (SCR class) to be

compliant with the PCI PTS POI Security Requirements v5.1.

When granted, PCI SSC approval is provided by PCI SSC to ensure certain security and operational

characteristics important to the achievement of PCI SSC’s goals, but PCI SSC approval does not under

any circumstances include any endorsement or warranty regarding the functionality, quality or

performance of any particular product or service. PCI SSC does not warrant any products or services

provided by third parties. PCI SSC approval does not under any circumstances include or imply any

product warranties from PCI SSC, including, without limitation, any implied warranties of

merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by PCI

SSC. All rights and remedies regarding products and services which have received PCI SSC approval

shall be provided by the party providing such products or services, and not by PCI SSC.

Andere Handbücher für DynaProx

Inhaltsverzeichnis

Andere Magtek Kartenleser Handbücher

Magtek

Magtek iDynamo 6 Bedienungsanleitung

Magtek

Magtek DynaFlex Bedienungsanleitung

Magtek

Magtek eDynamo Bedienungs- und Wartungshandbuch

Magtek

Magtek 99875388-9 Produkthandbuch

Magtek

Magtek 99875320-5 Produkthandbuch

Magtek

Magtek DynaFlex Bedienungsanleitung

Magtek

Magtek DynaFlex II Bedienungsanleitung

Magtek

Magtek eDynamo Bedienungsanleitung

Magtek

Magtek ADYNAMO Bedienungsanleitung

Magtek

Magtek DYNAMAG Bedienungsanleitung

Magtek

Magtek DYNAMAG Bedienungsanleitung

Magtek

Magtek D99875494-51 Bedienungsanleitung

Magtek

Magtek DynaPro Mini Bedienungsanleitung

Magtek

Magtek MDYNAMO Bedienungsanleitung

Magtek

Magtek Universal SDK Bedienungs- und Wartungshandbuch

Magtek

Magtek MICRSafe Produkthandbuch

Magtek

Magtek DynaPAD Bedienungsanleitung

Magtek

Magtek kDynamo Air Bedienungsanleitung

Magtek

Magtek BulleT SPP Series Bedienungsanleitung

Magtek

Magtek DynaPro Go Bedienungs- und Wartungshandbuch

Magtek

Magtek DYNAMAG Bedienungsanleitung

Magtek

Magtek tDynamo Bedienungsanleitung

Magtek

Magtek iDynamo 6 Bedienungsanleitung

Magtek

Magtek ADYNAMO Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch