Maintronic Casambi CBA UP Bedienungsanleitung
CBA UP
Casambi blind actuator
Valid from version:
(H=Hardware | F=Firmware)
10.750 - CBA UP H2 | F2.5
10.752 - CBA UP H1 | F2.5
10752_MA_en_A4_CBA-UP_20210310
Manual EN
EN
Manual english Casambi blind actuator
2
1. General informaon 3
1.1 About this Document 3
1.2 Service and contact 3
1.3 Legals 3
1.4 Symbol explanaon 4
2. Safety informaon 5
3. Product descripon 6
3.1 Intended Use 6
3.2 Funcons 6
3.4 Operang notes 7
3.3 Installaon and dimensions 8
3.5 Connecons and elements 9
4. Commissioning 10
4.1 Update rmware 10
4.2 Choose applicaon proles 10
4.3 Select prole and learn into a network 11
4.3.1 Prole A: CBA Blind
Drive blind | Adjust slats 12
4.3.2 Prole B: CBA Blind + Buons
Drive blind | Adjust slats | addional switches 13
4.3.3 Prole C: CBA Shuer
Roller blind drive 14
4.3.4 Prol D: CBA Shuer + Buons
Roller blind drive | Operaon addional switches 15
4.3.5 Prol E: CBA Buons
Roller blind drive | with buom operaon elements in App 16
4.4 Calibraon 17
5. Operaon 18
5.1 Operaon with device buon 18
5.2 Operaon with pushbuon input T1 / T2 (only 10.752) 18
5.3 Push Buon mode 18
5.4 Congure pushbuon inputs 19
5.5 Operaon with pushbuon over L‘ release phase 20
Table of contents
www.maintronic.de 3
1. General informaon
1.3 Legals
The division building automaon and all associ-
ated products are products of MTC maintronic®
GmbH (hereaer maintronic). All rights reserved,
as well as mistakes and typing errors.
The trademarks and trade names menoned in
this document are the property of their respec-
ve owners.
The content in this document is for product infor-
maon purposes only. Product features may vary
during connuous product development and may
change at any me without noce.
maintronic assumes no liability or warranty regar-
ding this document or the products described.
1.1 About this Document
Congratulaons and thank you for choosing this
maintronic product and the trust you have placed
in us. We, the team of maintronic, wish you a lot
of fun with this product.
Due to connuous product development, some of
the informaon may not be complete and up-to-
date.
The informaon in this document is subject to
change without prior noce. Please check our
website www.maintronic.de, if there is a newer
version.
1.2 Service and contact
You can nd informaon, onlinehelp as well as
downloads for the product on our website. Con-
tact us if you have any problems or quesons
about your device.
Manual english Casambi blind actuator
4
1.4 Symbol explanaon
CAUTION
The signal word „CAUTION“ indicates a possibly imminent danger. If it is not avoided, slight
or minor injuries may result.
ATTENTION
The signal word „ATTENTION“ indicates a situaon that can lead to material damage. Either
to the product itself or to other objects in the environment.
WARNING
The signal word „WARNING“ indicates a possibly imminent danger. If it is not avoided, death
or very serious injuries may result.
DANGER
The signal word „DANGER“ indicates an imminent danger. If not avoided, death or serious
injury will result.
NOTE
The signal word „NOTE“ indicates ps and recommendaons to help you get the most out of
the product.
www.maintronic.de 5
WARNING
For your own safety, read all instrucons and in-
formaon in this manual carefully before inial
operaon. Keep this manual for future reference.
The instrucons are an integral part of the pro-
duct and must be handed to the end customer.
All informaon and instrucons in this manual
must be observed completely and in detail. The
manufactuer is not responsible for any direct or
consequenal damage that results from disregar-
ding any informaon in this manual.
Waste disposal
In accordance with European Direcve 2002/96/
EC (it`s) not longer usable electronic devices and
defecve or used baeries (European Direcve
2006/66EG) must collected separately and dispo-
sed by an environmentally sound recycling.
This symbol indicates that electrical and elect-
ronic equipment must be disposed of separately
from normal waste at the end of its operaonal
lifeme.
Should these product are no longer be useable,
the user is required by law to dispose of old ap-
pliances separately from their household waste e.
g. at a local authority collecon point or recycling
center.
CE-marking
The devices comply with the EU direcves appli-
cable at the me they are placed on the market.
DANGER
The unit must only be installed and serviced by a
proven electrican specialist, in accordance of all
relevant regulaons, safety and accident preven-
on direcves of the country.
Be sure that the exisng mains voltage corres-
ponds with the specied operang voltage befo-
re operang the device.
Risk of electric shock. Do not operate the device
without a cover. Even when switched o, voltage
may be present at the outputs. When working on
the device or connected loads, always disconnect
the upstream fuse from the power supply.
Apply the „Five Safety Rules“
(DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being switched on again
3. Determine absence of voltage
4. Ground and short circuit
5. Cover or isolate nearby live parts
Only install the device in places with a good
venlaon and without humidity or high tempe-
ratures. Do not expose the unit to rain or snow.
Do not operate the unit near heat sources, e.g.
radiators.
If any of the following occurs, do not operate the
device without rst checking it:
• if objects have fallen or liquid has been
spilled into the unit.
• if the device has been exposed to rain.
• if the device does not operate normally or
with altered characteriscs.
• if the device has been dropped or has a bro-
ken housing.
For cleaning only use a dry, so cloth, by no me-
ans liquids.
2. Safety informaon
Manual english Casambi blind actuator
6
3. Product descripon
3.1 Intended Use
Casambi blind actuator for control of blind, shut-
ter, gate, or awning motors. Control by Casambi
Bluetooth via APP or local control using standard
blind pushbuons.
Product Item.No. Type of relay Construcon
CBA UP 10.750
EOL
2 CH Changeover Flush-mounted
housing (UP)
CBA UP 10.752 2 CH Changeover;
2 pushbuon
inputs
Flush-mounted
housing (UP)
Item 10.752 - CBA UP has 2 addional key inputs
compared to the 10.750 all other funcons are
idencal.
16A
Changeover
100..240V
70 g
0...+50°C
As soon as the device is added to your network,
it can be operated. Groups can be formed, scenes
and mers can be created.
These funcons allow e.g. to group 5 blinds on one
side of a building and to operate them together.
In addion, automated up and down movements
can be programmed as a me-controlled scene.
If you need help with conguraon and opera-
on of Casambi please refer to the ocial Casambi
help at: hps://support.casambi.com
• For indoor use only
• Flush mount housing for installaon in junc-
on, cavity or switch boxes.
3.2 Funcons
The blind actuator CBA UP Casambi has a Blu-
etooth Casambi interface and can be opera-
ted via smartphone with the Casambi APP.
Casambi App automacally idenes the device
and can be integrated into exisng networks.
The device has dierent operang modes
(so-called Casambi proles) with the pro-
les the funconality and the parameters are
determined. Casambi prole must be selec-
ted in the Casambi APP when pairing a device
in order to select a specic operang mode.
Manual english Casambi blind actuator
7
Group
Single
Group
Single
5%
Slat angle
85 %
Hori ontal positionz
0% (open)
60 %
100% (closed)
85%
60 %
3.4 Operang notes
There are dierent methods to operate the blind
actuator.
Driving over driving me
In the case of driving over the driving me, a sin-
gle impulse (e.g. pressing a buon or starng a
me-controlled scene) triggers the blind/shuer
etc. to move once to the zero point(OT) 0% or end
point(UT) 100%.
This driving me is stored in the parameters of
the actuator once and then recalled (see 4.4).
Driving to an absolute posion
With a drive to an absolute posion, any hori-
zontal posion can be approached. The absolute
posion is controlled by a slider (from OT 0% to
UT 100%), which determines the posion of the
connected blind / shuer, etc..
Slat adjustment
A slider can be used to adjust the angle of the slats
for venean blinds. Furthermore, the slat posion
is stored when moving to an absolute posion and
the set value is automacally readjusted aer re-
aching the driving posion.
For example, if the blind shall be moved down
only a lile bit and the slats are set to 5%. Then
aer reaching the target posion, the slats are set
to 5% again.
www.maintronic.de 8
30 mm
55 mm
3.3 Installaon and dimensions
Even though the device has very compact dimen-
sions, it is strongly recommended to use the dee-
pest juncon boxes possible.
Depending on which pushbuon aachments are
used, up to 30 mm of addional installaon space
is required.
For installaon in cavity or switch boxes, the side
aps have to be removed. Install the device with
the labeling, LED and device buons facing for-
wards.
removeable flaps
Manual english Casambi blind actuator
9
3.5 Connecons and elements
1Devicebuon
2Status-LED
8mm
0,5...1,5mm² starr | single wire
0,5...1,5mm² exibel | ne wire
0,5...0,75mm² exibel mit Aderendhülse | ne wire with ferrule
Figure: CBA UP - 10.750
Figure: CBA UP - 10.752
NOTE
The relay outputs are mutually locked
to ensure that only one drive path is
acve at a me (motor protecon).
1 N Neutral conductor 4Relay up
2 N Neutral conductor 5Relay down
3 L Input Voltage 230V AC 6L‘ Release phase for
standard blind buon
7T1 Pushbuon input 1 8T2 Pushbuon input 2
Pushbuon inputs T1 / T2 only item no.: 10.752
www.maintronic.de 10
4. Commissioning
To make sure that the funconality of the device
is up to date, rst of all you have to check if a new
rmware is available.
4.1 Update rmware
1. Go to nearby devices
2. Scroll down
3. Check for updates
4. If an update is available, please install
4.2 Choose applicaon proles
The device has dierent operang modes (so-
called Casambi proles) with the proles the
funconality and the parameters are determined.
Before programming, a Casambi prole must be
selected (by default, the prole - CBA Blind + But-
tons is set).
Proles for venian blinds
CBA Blind • Operaon via APP
• Move blind to absolute posion
• Adjust slat angle
CBA Blind
+ Buons
• Move blind to absolute posion
• Adjust slat angle
• Addional controls for acvaon
via external pushbuons or scenes
Proles for roller blind
CBA Shuer • Operaon via APP
• Move roller blind to absolute posion
CBA Shuer
+ Buons
• Move roller blind to absolute posion
• Addional controls for acvaon
via external pushbuons or scenes
Select a suitable prole for your applicaon on
the following pages.
Andere Handbücher für Casambi CBA UP
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Maintronic Controller Handbücher
