Makita MAKSTAR DC18RA Handbuch

Continuous Rating (W)

Voltage (V) Cycle (Hz) Input Output Max. Output(W)

110-120

DC 7.2 - 18

DC 9.0

YesDouble Insulation

2.0 (6.6)

1.0 (2.2)

220-240

50 - 60

240

Models No.

Description

PRODUCT

Current (A)

TECHNICAL INFORMATION

CONCEPT AND MAIN APPLICATIONS

Specification

Optional accessories

P 1 / 5

DC18RA

Charger

Dimensions: mm (")

Width (W)

Height (H)

Length (L) 164 (6-1/2)

190 (7-1/2)

106 (4-3/16)

Power Supply Cord: m ( ft )

Net weight: Kg (lbs)

Output voltage : V

* ADP03 Automatic Refreshing Adapter

* ADP04 Interchangeable Adapter

Output current : A

< Note > The above figures about charging time may differ from condition to condition on batteries' temperature

or room temperature.

Considering the future demand for slide type 7.2V Li-ion and Ni-MH

battery, the above product has been launched with wider changeable range.

This new face contains trickle charging function.

Its brief benefits are mentioned below.

1. Only 22 minutes for full-charge of 3.0 Ah Li-ion Battery

2. Innovative computer controlled charging system realized most suitable

charge by making the digital communication between charger and battery.

3. Cooling system to keep the ideal temperature for charge.

4. Power display for battery; It displays the charging amounts of battery

in two steps. (less than 80% or more than 80% of charge)

5. The adapter ADP04 (optional accessory) enables to charge the existing

Ni-Cd and Ni-MH batteries.

6. The adapter ADP03 (optional accessory) enables to refresh inactive

batteries

7. Selectable melody sound of completed charging

Li-ion BL1815

Cell Voltage: VCapacity: Ah

Charging

Time

Battery

Approx. 15 min.

Approx. 20 min.

Approx. 22 min.

Approx. 30 min.

9.6

1.5

BL1830

183.0

Li-ion 14.43.0 BL1430 / A

14.43.3 BH1433

Ni-MH

BH1420

BH1220 / C

14.4

BH9020 / A

2.0

9.6 BH90333.3

9.6

Ni-MH BH9033A3.3

Ni-MH 3.3 BH1233/ C

P 2 / 5

Repair

[1] DISASSEMBLY/ASSEMBLY

[1] -1. Terminal Unit

Fig. 1 Fig. 2

Fig. 3

CAUTION: Disconnect the charger from the power source for safety

before repair/ maintenance !

DISASSEMBLING

Cap 13: 4 pcs.

Tapping

Screw 4x20: 4 pcs.

Charger Case

Cover

Charger Case

Cover

Charger Case

Complete

1. Remove four caps 13 and four 4x20 tapping screws. Consequently, charger case complete can be separated

from charger case cover. (Fig. 1)

< Note >

When removing charger case complete from charger case cover, be sure to put the product on the work bench, with

charger case complete faced to the upper side.

2. Loosen band with which bundles lead wires of terminal unit and that of cirocco fan. Disconnect connector 1 and

connector 2, and remove terminal unit from charger case cover. (Fig. 2)

Compression

Spring 4

Terminal Unit

Band

Connector 1

Band

Connector 2

ASSEMBLING

1. Insert compression spring 4 over the boss for accepting

the compression spring. (Fig. 3)

2. Insert three legs of terminal unit into the three bosses

of charger case cover. (Fig. 3)

3. Connect the connector 1 to the joint for connector 1 and

connector 2 to the joint for the connector 2. (Fig. 3)

4. Bundle the lead wires with band. Refer to Fig. 1.

5. Put the lead wires by the rib and wall of charger case cover

as instructed [2] Wiring Diagram in page 5.

6. Assemble charger case complete with four 4 x20 tapping

screws and four caps 13 firmly.

Compression

Spring 4

Boss for accepting

the compression

spring

Connector 1

Connector 2

Terminal Unit

Joint for

the connector 1

Joint for

the connector 2

Connector 1

Connector 2

P 3 / 5

Repair

[1] DISASSEMBLY/ASSEMBLY

[1] -2. Terminal Cover

Fig. 5 Fig. 5A

DISASSEMBLING

ASSEMBLING

Fig. 4

Terminal Cover

1. Separate charger case cover from charger case complete. (Fig. 1)

2. Remove PT3x10 tapping screw and disassemble terminal cover.

<Note> Be sure to hold two compression springs with your finger so as not to jump out of terminal cover

when disassembling terminal cover.

1. While setting two 4 compression springs in terminal cover and aligning them with the bosses of charger case

complete, fit the rib of terminal cover to that of charger case complete. (Fig. 4.)

2. Fasten PT3x10 tapping screw through elliptic hole of charger case complete into the screw hole of terminal

cover. (Refer to Fig. 4.)

3. Make sure that terminal cover can return to the original position by the help of compression spring 4, after

pushing terminal cover toward the charging position.

Charger Case Cover

Compression Spring 4

Tapping Screw

PT3x10

Rib of Charger

Case Complete

Rib of Terminal

Cover

Pt. No.233194-8

Compression spring 4 for Terminal Cover

*L (Free Length) : 25mm

*D (Coil Diameter): 4.8mm

Pt. No.231474-6

Compression spring 4 for Terminal Unit

*L (Free Length) : 20mm

*D (Coil Diameter): 5.0mm

Compression Spring 4

< Note >

Compression Spring 4 is used also as a cushion for terminal unit as illustrated in Fig. 3. However, this compression

spring 4 is different from those for terminal cover in the free length and coil diameter. (Fig. 5A)

Here is boss for accepting

compression spring 4.

Here is boss for accepting

compression spring 4.

P 4 / 5

Repair

[1] DISASSEMBLY/ASSEMBLY

[1] -3. Varistor and Fuse

Fig. 7

Varistor

Pt. No.647306-1 for High Voltage H= 22mm

Pt. No.647321-5 for Low voltage H= 20mm

Distinction of high voltage from low voltage

2) Replacing Varistor/Fuse

The varistors are different, and installs depending on the voltage. The distinction can be made as illustrated in Fig. 6.

Varistor/fuse is soldered on the charging circuit. Remove a broken varistor/fuse with soldering iron.

And solder brand-new one with soldering iron. (Fig. 7)

1) Types of Breakage

Sign of varistor breakage

a) Cracks in the surface of varistor

b) Black discolored surface of varistor

1. If fuse is broken, varistor is usually broken by showing the sign of breakage mentioned below.

In this case, replace fuse and varistor at the same time.

2. Only varistor can be damaged if charger is plugged in a power source at double the rated voltage.

In this case, replace varistor solely.

3. If fuse is broken while varistor is not broken, charging circuit can be broken.

In this case, replace charging circuit complete.

Fig. 6

Fuse

Charging

Circuit

Wiring diagram

P 5 / 5

Fig. D-1

Fig. D-2

Bundle the lead wires

with band.

In this area, put lead wires

between the rib and wall.

Be careful, not to pinch the

lead wires with the rib of

charger case cover.

Rib

Cirocco Fan Terminal Unit

Wall

Connector 1

have to be connected

firmly.

Connector 2

Connector 3

Put power supply cord into the labyrinth

formed rib.

Power Supply Cord

Charging

Circuit

Charging

Circuit

Andere Handbücher für MAKSTAR DC18RA

Inhaltsverzeichnis

Andere Makita Akkuladegerät Handbücher

Makita

Makita DC1804 (MJ) Bedienungsanleitung

Makita

Makita DC18SE Bedienungsanleitung

Makita

Makita DC18RD Bedienungsanleitung

Makita

Makita DC1002 Bedienungsanleitung

Makita

Makita DC18RD Bedienungsanleitung

Makita

Makita DC18SE Bedienungsanleitung

Makita

Makita DC1414 (MJ) Bedienungsanleitung

Makita

Makita DC10WB Bedienungsanleitung

Makita

Makita DC1822 Bedienungsanleitung

Makita

Makita MAKSTAR DC18RA Bedienungsanleitung

Makita

Makita DC24SC Bedienungsanleitung

Makita

Makita DC24SA Bedienungsanleitung

Makita

Makita DC24SA Handbuch

Makita

Makita MAKSTAR DC18RA Bedienungsanleitung

Makita

Makita DC1822 Bedienungsanleitung

Makita

Makita DC18SH Bedienungsanleitung

Makita

Makita DC18SF Bedienungsanleitung

Makita

Makita MAKSTAR DC18RA Bedienungsanleitung

Makita

Makita DC4001 Bedienungsanleitung

Makita

Makita Makstar DC18SD Bedienungsanleitung

Makita

Makita DC1822 Bedienungsanleitung

Makita

Makita DC18WC Bedienungsanleitung

Makita

Makita DC18RE Bedienungsanleitung

Makita

Makita DC18SF Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung