Makita KP0810 Handbuch

Model KP0810 features the following user-friendly advantages:

*Left and right chip ejection for convenience

*Precise planing depth setting by adjustment dial with click stops

and easy-to-read scale with 0.1mm divisions

*Front base with 3 chamfering grooves

*Shiplapping Cuts: up to 25mm (1")

Model KP0810C additionally features the followings:

*Electronic with soft start and constant speed control

*Powerful 1,050 W motor

Models No.

Description

PRODUCT

TECHNICAL INFORMATION

CONCEPT AND MAIN APPLICATIONS

Specification

Standard equipment

Optional accessories

Note: The standard equipment for the tool shown above may differ by country.

P 1 /11

KP0810, KP0810C

Power Planer 82mm (3-1/4")

Dimensions: mm (")

These products are available in the following variations. Width (W)

Height (H)

Length (L) 290 (11-3/8)

168 (6-5/8)

176 (6-15/16)

KP0810/ KP0810C without Plastic carrying case

KP0810K/ KP0810CK with Plastic carrying case

Continuous Rating (W)

Voltage (V) Cycle (Hz) Input Output Max. Output (W)

110

120

220

230

240

8.1

7.5

4.1

3.9

3.7

50/60

850

---

850

1,050

---

1,050

500

900

1,200

1,700

Current (A)

KP0810KP0810 KP0810CKP0810C KP0810 KP0810C

Blade gauge assembly

Depth guide

Guide rule

Socket wrench 9

Planer blade (re-sharpenable type) or T.C.T. Mini planer blade

Sharpening holder assembly (for countries using re-sharpenable type Planer blade)

Dust bag (UK only)

Plastic carrying case (for KP0810K/KP0810CK)

Guide rule

Chamfering rule assembly

Dust bag

Sharpening holder assembly

Blade gauge assembly

Planer blade (re-sharpenable type)

T.C.T. Mini planer blade

Dressing stone

Elbow

Plastic carrying case

*2.0m (6.6ft) for Australia, 4.0m (13.1ft) for Germany

82 (3-1/4)

4 (5/32)

25 (1)

3.2 (7.2) 3.3 (7.3)

*2.5 (8.2)

16,000 12,000

Double insulation

KP0810 KP0810C

No load speed: min-1=rpm

Model No.

Planing width

Planing depth

Shiplapping

Net weight: kg (lbs)

Electronic

features

Protection against electric shock

Power supply cord: m (ft)

Constant speed control

NoSoft start

Yes

Capacities: mm (")

P 2 /11

[2] LUBRICATION

Apply Makita grease N. No.1 to the following portions designated with the black triangle to protect

parts and product from unusual abrasion.

[1] NECESSARY REPAIRING TOOLS

CAUTION: Unplug the machine and remove the planer blade from the machine for safety

before repair/ maintenance in accordance with the instruction manual!

CAUTION: Unplug the machine and remove the planer blade from the machine for safety

Always wear gloves when handling the drum and the planer blade!

Repair

Fig. 1

Housing

Knob

Knob cover

Compression spring 3

Cam

Tapping screw bind CT 4x12

69 Leaf spring (2 pcs)

Steel ball 4 (2 pcs)

Front base complete

Surface that contacts Housing

Whole surface

Hole for accepting Cam

Edges on which Housing slides

Gear extractor (large) Removing Drum from Bracket complete

Lifting up Bracket when removing it from Housing

Removing Ball bearings from Armature

Magnetizing Screwdriver for removing Steel ball 4 and

Compression spring 3

Removing Retaining ring S-10 from Drum holder complete

Holding the Machine when removing Bracket from Housing

1R045

Bearing extractor

(2pcs required)

1R263

Bearing extractor1R269

Screwdriver magnetizer1R288

1R291

Retaining ring S and R pliers

1R350

Ring 60 (2pcs required)

Code No. Description Use for

Item No. Description Portion to lubricate

P 3 /11

[3] DISASSEMBLY/ASSEMBLY

[3] -1. Poly V-Belt

Repair

DISASSEMBLING

ASSEMBLING

1R350

Belt cover

1) Put the machine on two 1R350's with Belt cover side up. (Fig. 2)

2) Remove Belt cover by unscrewing Pan head screw M4x18. Poly V-belt 4-241 can now be seen. (Fig. 3)

3) If you replace Poly V-belt 4-241 with new one,

remove it by cutting with nippers.

If you reuse Poly V-belt 4-241 to be removed,

remove it by following the steps below (Fig. 4):

1. Insert a slotted screwdriver between

Poly V-belt 4-241 and Bracket complete

as illustrated in Fig. 4.

2. While turning V-Pulley 4-37 (larger one)

in the direction of the black arrow, lift up

Poly V-belt 4-241 with the screwdriver.

Pan head screw M4x18

Bracket complete

Poly V-belt 4-241 V-Pulley 4-37

Fig. 3

1R350

Front base

Base

Fig. 2

Fig. 4

Hold the machine securely

by putting Base and Front base

on the shaded portion of 1R350.

Belt cover

Poly V-belt 4-241

V-Pulley 4-20L

Assemble Poly V-belt 4-241 to V-Pulley 4-20L (smaller one of the two V-Pulleys) as illustrated in Fig. 5

then to V-Pulley 4-37 (larger one) as in Fig. 6. Then assemble Belt cover to Bracket complete. (Refer to Fig. 3)

Engage all V-shaped ribs of Poly V-belt 4-241

with the grooves of V-Pulley 4-20L (small one).

Poly V-Belt 4-241

Fig. 5 Fig. 6

V-Pulley 4-37

Poly V-belt 4-241

V-Pulley 4- 20L

Poly V-belt 4-241

V-Pulley 4-37

Align the V-shaped ribs of Poly V-belt with the groove of

V-Pulley 4-37 (large one). While pressing down the two portions

of the Poly V-belt designated with the gray arrow, turn V-Pulley

4-37 in the direction of the black arrow until all ribs of the Poly

V-belt engage completely with all grooves of the both V-Pulleys.

P 4 /11

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Motor Section

Repair

1R263

Bracket complete

Armature

Baffle plate

Duct assembly

with Nozzle

Drum complete

1R263

Fig. 9

Fig. 10 Fig. 11

Wrench 13

V-Pulley 4-20L

Do the reverse of the disassembling steps.

Note: Do not forget to assemble Baffle plate, duct assembly and Nozzle to Housing. (Fig. 9)

Tapping screw 4x18

(2 pcs)

Tapping screw 4x18

(4 pcs)

Rear cover

1) Remove Poly V-belt 4-241 as illustrated in Fig. 2 to Fig. 4.

Note: Armature cannot be removed from Bracket complete until the Poly V-belt is removed from Pulleys.

2) Remove Rear cover by unscrewing two 4x18 Tapping screws. (Fig. 7)

Then disconnect Carbon brushes from Commutator of Armature.

3) Put the machine on two 1R350's with Bracket complete side up. (refer to Fig. 2.)

Unscrew four 4x18 Tapping screws that fasten bracket complete to Housing. (Fig. 8)

4) Remove Bracket complete together with Armature and Drum complete by levering off Bracket compete from Housing

using two 1R263's. Duct assembly can be removed together with Nozzle. (Fig. 9)

5) Remove V-Pulley 4-20L from Armature shaft by turning clockwise with Wrench 13. (Fig. 10)

Important: Wear gloves to prevent injury to be caused by the sharp edge of Drum complete.

6) Armature can now be removed from Bracket complete by tapping Bracket complete with plastic hammer

as illustrated in Fig. 11.

Fig. 7 Fig. 8

DISASSEMBLING

1R350

Bracket complete

Housing

Armature Drum complete

Armature

Bracket complete

ASSEMBLING

P 5 /11

[3] DISASSEMBLY/ASSEMBLY

[3] -3. Drum and Drum Holder Section

Repair

1) Remove Bracket complete from Housing as illustrated in Fig. 7 to Fig. 9.

2) Remove V-Pulley 4-37 from the shaft of Drum complete by turning counterclockwise with Wrench 13. (Fig. 12)

Important: Wear gloves to prevent injury to be caused by the sharp edge of Drum complete.

3) Remove Drum complete from Bracket complete using 1R045. (Fig. 13)

4) Unscrew two M4x8 (+) screws that retain Ball bearing 6200DDW, then remove Ball bearing 6200DDW by tapping

Bracket complete with plastic hammer as illustrated in Fig. 14.

Note: Ball bearing 6900LLB, which holds the shaft of drum complete on the opposite side to Ball bearing 6200DW,

remains assembled to Drum holder section to be disassembled in step 4) to 8).

5) By removing two 5x25 Tapping screws from the Rear cover side of Housing, Drum holder section can be disassembled

as illustrated in Fig. 15.

Fig. 12

1R045

Fig. 13

Drum complete

Fig. 14

(+) Screw M4x8 (2 pcs)

Ball bearing 6200DDW

Fig. 15

Tapping screw

5x25 (2 pcs)

Flat washer 5

Torsion spring 10

Drum cover

Drum holder

complete

DISASSEMBLING

Wrench 13

V-Pulley 4-37 ArmatureDrum complete

Bracket

complete

Housing, viewed from

Rear cover side

6) Remove Retaining ring S-10 from Drum holder complete using 1R291. (Fig. 16)

7) Remove Ball bearing 6900LLB from Drum holder complete using 1R269. (Fig. 17)

8) Remove Flat washer 10 from Drum holder complete. (Fig. 18)

1R269

1R291

Retaining ring S-10

Ball bearing

6900LLB

Flat washer 10

Drum holder complete

Fig. 16 Fig. 17 Fig. 18

Drum holder

section

Flat washer 10

P 6 /11

[3] DISASSEMBLY/ASSEMBLY

[3] -3. Drum and Drum Holder Section (cont.)

Repair

1) Do the reverse of the disassembling steps 8) to 6). (Figs. 18 to 16)

Note: Do not forget to assemble Flat washer 10 to Drum holder complete as illustrated to left in Fig. 19

before assembling Ball bearing 6900LLB. Otherwise, Ball bearing 6900LLB cannot be assembled

correctly to Drum holder complete as illustrated to right in Fig. 19.

2) Assemble Drum holder section to the Rear cover side of Housing as illustrated in Fig. 20.

3) Do the reverse of the disassembling steps 4) to 1). (Figs. 14 to 12)

Drum cover

Torsion spring 10

Tapping screw 5x25

Drum holder complete

pin of Drum holder complete

hook of Drum cover

ASSEMBLING

Flat washer 10

Without Flat washer 10

[Wrong][Correct]

Drum holder complete

Ball bearing 6900LLB

Fig. 19

Fig. 20

Flat washer 5

Housing,

viewed from Rear cover side

Assembling Drum holder section to Housing

Drum holder section,

fastened in place on Housing

Insert this loop portion of

Torsion spring 10 through

pin of Drum holder complete.

Put this end of Torsion spring 10

on the hook of Drum cover.

Flat washer 10

P 7 /11

[3] DISASSEMBLY/ASSEMBLY

[3] -4. Front Base Section

Repair

Knob cover

1) Lever off Knob cover from Knob using a small slotted screwdriver. (Fig. 21)

2) Remove Knob from Cam by unscrewing Tapping screw 4x18. (Fig. 22)

3) Remove Steel ball 4 and Compression spring 3 with a screwdriver magnetized with 1R288. (Fig. 23)

4) Remove Front panel. And remove two Leaf springs by unscrewing

two bind CT 4x12 Tapping screws.

Front base and Cam can now be removed from Housing. (Fig. 24)

Knob

Tapping screw 4x18

Fig. 21 Fig. 22 Fig. 23

Leaf spring

(2 pcs)

Front base

Housing

Cam

Front panel Tapping screw

bind CT 4x12 (2 pcs)

Fig. 24

Cam

DISASSEMBLING

Steel ball 4 (2 pcs)

Compression

spring 3 (2 pcs)

1) Apply Makita grease N. No.1 to the portions designated in Fig. 1

on page 2.

2) Insert Cam through the hole of Housing from the bottom side of

Housing as illustrated in Fig. 25.

3) Assemble Front base to Cam, then provisionally install Front panel

on Housing. (Fig. 26)

4) Adjust the position of the projected key portion of Cam as illustrated

in Fig. 27.

5) Remove the Front panel provisionally installed, then secure

Front base with Leaf spring and two bind CT 4x12 Tapping screws.

(Refer to Fig. 24.)

6) Do the reverse of the disassembling steps 3) to 1). (Figs. 23, 22, 21)

Fig. 25 Fig. 26

Fig. 27

Nozzle

Cam

Front base

Cam

ASSEMBLING

Front panel

projected key portion of Cam

Cam

Note:

For your convenience in the step 4),

face the projected key portion of Cam

towards Nozzle side after inserting

Cam in place.

projected key portion of Cam

(to fit in the groove of Knob)

about

110 degrees

The projected key portion of Cam

must be located within the range

indicated to right.

Front panel

large view of Cam

Housing, viewed from top

P 8 /11

[3] DISASSEMBLY/ASSEMBLY

[3] -5. Base section

Repair

Tapping screw 4x18 (4 pcs)

Bracket complete

Base can be removed from Housing by unscrewing four 4x18 Tapping screws. (Fig. 28)

Important: The edge of Base on Drum holder complete side must be exactly aligned with that of Front base.

1) Place a ruler against the edge of Front base on Drum holder complete side. (Fig. 28)

2) Fasten four 4x18 Tapping screws while making sure that the ruler is exactly square against Front base and Base.

(Fig. 28)

Drum holder complete

Ruler

Front base Base

Fig. 28

[3] -6. Planer Blade

Install Planer blades as illustrated in Fig. 29.

DISASSEMBLING

ASSEMBLING

Drum complete

[Machine, viewed from bottom]

Fig. 29

Planer blade

Drum plate

Base

edge of Base

0.2 - 0.4mm

Front base

edge of Front base

Drum

The side edge of each Planer blade must protrude

0.2 to 0.4mm from the edge of Base aligned with

that of Front base as described in [3] -5.

P 9 /11

[3] DISASSEMBLY/ASSEMBLY

[3] -7. Electrical Parts in Handle Section

Repair

For replacing the electrical parts in Handle section;

1) Remove Rear cover by unscrewing two 4x18 Tapping screws.

(Fig. 30)

Note: It is impossible to remove Handle (R) from Handle (L)

without removing Rear cover.

2) Remove Handle (R) from Handle (L) by unscrewing five 4x18

Tapping screws as illustrated to left in Fig. 31.

Now the electrical parts illustrated to right in Fig. 31 can be

removed from Housing (L).

Note: If it is difficult to remove screws, put the machine

on two 1R350's as illustrated in Fig. 32.

Tapping screw 4x18 (5 pcs)

Fig. 31

Handle (L)

Controller

(KP0810C only)

Pickup coil (KP0810C only)

Power supply cord

Noise suppressor

Switch

DISASSEMBLING

Rear cover

Tapping screw 4x18 (2 pcs)

Fig. 30

Handle (R)

Fig. 32

1R350

Circuit diagram

P 10/11

Fig. D-2

Fig. D-1

Field

Switch

*Noise suppressor

(if used)

*Noise Suppressor is not used for some countries.

Carbon brush Carbon brush

Pickup coil

Power supply cord

[White Lead wire is used

for some countries.]

Controller

Black

White

Red

Blue

Color index of lead wires' sheath

Black

White

Color index of lead wires' sheath

Front base sidePower supply cord side

KP0810

KP0810C

*Noise suppressor

(if used)

Switch

Carbon brush Carbon brush

Power supply cord

Andere Handbücher für KP0810

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Makita Hobel Handbücher

Makita

Makita 1806B Bedienungsanleitung

Makita

Makita 1902 Kurzanleitung

Makita

Makita KP0800 Bedienungsanleitung

Makita

Makita DKP181 Bedienungsanleitung

Makita

Makita 1923H Bedienungsanleitung

Makita

Makita 1050D Bedienungsanleitung

Makita

Makita PC1100 Bedienungsanleitung

Makita

Makita M1902 Handbuch

Makita

Makita PC5010C Bedienungsanleitung

Makita

Makita 1600 Bedienungsanleitung

Makita

Makita 1911B Bedienungsanleitung

Makita

Makita KP312 Bedienungsanleitung

Makita

Makita N1900B Bedienungsanleitung

Makita

Makita DKP140 Bedienungsanleitung

Makita

Makita 1911B Bedienungsanleitung

Makita

Makita KP0810 Bedienungsanleitung

Makita

Makita KP312 Bedienungsanleitung

Makita

Makita 1911B Bedienungsanleitung

Makita

Makita DKP180RFE Bedienungsanleitung

Makita

Makita KP312S Bedienungsanleitung

Makita

Makita 1806B Kurzanleitung

Makita

Makita 1923H Bedienungsanleitung

Makita

Makita 1002BA Kurzanleitung

Makita

Makita HG 1100 Bedienungsanleitung

Beliebte Hobel Handbücher anderer Marken

Felisatti

Felisatti PF180/1500 Bedienungsanleitung

DeWalt

DeWalt DW 1150 Leitfaden

Triton

Triton TRP UL Kurzanleitung

Melbourne

Melbourne MTC-49407 Bedienungsanleitung

VARO

VARO POWERplus POW1520 Bedienungsanleitung

Powermatic

Powermatic 209 Service-Handbuch

Scheppach

Scheppach Plana 3.0 Montageanleitung

Grizzly

Grizzly G1033X Bedienungsanleitung

Stanley

Stanley STPP7502 Bedienungsanleitung

Palmgren

Palmgren 84115 Bedienungsanleitung

Draper

Draper PT610V Bedienungsanleitung

Berner

Berner BP 40-82 C Bedienungsanleitung

Grizzly

Grizzly G0603X Bedienungsanleitung

King Industrial

King Industrial CT-381FX Bedienungsanleitung

FXA

FXA FXAJD8220 Bedienungsanleitung

Delta Rockwell

Delta Rockwell 22-101 Bedienungsanleitung

Oliver

Oliver 4420 Bedienungsanleitung

Ryobi

Ryobi AP13AK Gebrauchsanweisung